• Journal of Biosystems Engineering
• /
• 제33권6호
• /
• pp.430-437
• /
• 2008

Optical diffuse reflectance sensing in visible and near-infrared wavelength ranges is one approach to rapidly quantify soil properties for site-specific management. The objectives of this study were to investigate effects of preprocessing of reflectance data and determine the accuracy of the reflectance approach for estimating physical and chemical properties of selected Missouri and Illinois, USA surface soils encompassing a wide range of soil types and textures. Diffuse reflectance spectra of air-dried, sieved samples were obtained in the laboratory. Calibrations relating spectra to soil properties determined by standard methods were developed using partial least squares (PLS) regression. The best data preprocessing, consisting of absorbance transformation and mean centering, reduced estimation errors by up to 20% compared to raw reflectance data. Good estimates ($R^2=0.83$ to 0.92) were obtained using spectral data for soil texture fractions, organic matter, and CEC. Estimates of pH, P, and K were not good ($R^2$ < 0.7), and other approaches to estimating these soil chemical properties should be investigated. Overall, the ability of diffuse reflectance spectroscopy to accurately estimate multiple soil properties across a wide range of soils makes it a good candidate technology for providing at least a portion of the data needed in site-specific management of agriculture.

• 상하수도학회지
• /
• 제29권3호
• /
• pp.337-345
• /
• 2015

Two step rapid filter system as a pre-treatment for the injected water into aquifer storage and recovery (ASR) in Korea was developed to reduce physical blockage and secure the volume of the injected water. First, single rapid sand filters with three different media sizes (0.4~0.7, 0.7~1.0 and 1.0~1.4 mm) were tested. Only two sizes (0.4~0.7 and 0.7~1.0 mm) satisfied target turbidity, below 1.0 NTU. However, they showed the fast head loss. To prevent the fast head loss and secure the volume of the injected water, a rapid anthracite filter with roughing media size (2.0~3.4 mm) were installed before a single rapid sand filter. As results, both the target turbidity and reduction of head loss were achieved. It was determined that the media size for a rapid sand filter in two step rapid filter system (i.e. a rapid anthracite filter before a rapid sand filter) was 0.7~1.0 mm. In addition, the effects of coagulant doses on the removal of natural organic matter (NOM), which might cause a biological clogging, were preliminarily evaluated, and the values of $UV_{254}$, dissolved organic carbon (DOC) and SUVA were interpreted.

• Elastomers and Composites
• /
• 제36권4호
• /
• pp.237-245
• /
• 2001

고무의 충전제로 사용되는 실리카의 보강효과를 높이기 위해 실란 커플링제인 bistriethox ysilyipropyltetrasulfide(Si 69)와 ${\gamma}$-mercaptopropyltrimethoxy silane(MPS)를 사용하여 실리카의 화학처리를 건식법과 습식법으로 행하였으며, 실란 커플링제를 직접 실리카와 혼합하는 건식법보다 혼합하기 전에 화학적으로 처리하는 건식법이 분산성, 젖음성, 동적특성 및 안정성에서 더욱 우수하였다. 화학처리된 실리카를 SBR 배합에 니더와 믹싱롤을 사용하여 균일하게 혼련하였고 측정한 물성으로부터 비교, 검토하였으며, 실란 커플링제를 사용하지 않을 때보다 물성이 현저히 증가하였으며, 실험으로부터 건식법의 경우 Si 69와 MPS의 최적 사용량은 2 w/w%이지만. 습식법의 경우 EA 및 TGA 분석으로부터 4 w/w% 이였다.

• Elastomers and Composites
• /
• 제8권1호
• /
• pp.33-51
• /
• 1973

We have studied the blending effects of Diene NF 35 R and Alfin 1530 at various blending ratios, 100/0, 70/30, 50/50, 30/70, 0/100, and of carbon black HAF-HS and ISAF-HS at various compounding ratios of 45 PHR, 55 PHR, 65 PHR, for tyre tread rubber. As the results, it was found that; 1. For tyre tread rubber, as the blending ratio, AR 1530/Diene NF 35R, indicated 70/30, the physical properties we examined were most excellent. 2. Excellent result was obtained in the case of carbon black compounding ratio of 55 PHR. The compounding of ISAF-HS made better result than that of HAF-HS for tensile strength, but the compounding of HAF-HS made better result than that of ISAF-HS for tearing strength and best result for abrasion quantity. 3. Heat buildup obtained from compounding carbon black HAF-HS indicated low temperature than that from compounding carbon black HAP-HS. As the compounding amount of carbon black increased, and as the blending amount of AR 1530 decreased, the heat buildup increased. 4. Carbon black was more efficient to AR 1630 than io Diene NF 35 R. 5. In the physical properties, mooney viscosity and mooney scorch time, as the compounding amount of carbon black increased, the values of mooney viscosity increased, but that of mooney scorch time had a max. point at the compoundiug amount of carbon black, 55 PHR.

• 한국수소및신에너지학회논문집
• /
• 제27권1호
• /
• pp.95-105
• /
• 2016

Spray-dried NiO-based oxygen carriers developed for chemical looping combustion required high calcination temperatures above $1300^{\circ}C$ to obtain high mechanical strength applicable to circulating fluidized-bed process. In this study, the effect of CBB ($CaO{\cdot}BaO{\cdot}B_2O_3$) addition, as a binder, on the physical properties and oxygen transfer reactivity of spray-dried NiO-based oxygen carriers was investigated. CBB addition resulted in several positive effects such as reduction of calcination temperature and increase in oxygen transfer capacity and porosity. However, oxygen transfer rate was considerably decreased. This was more apparent when a higher amount of CBB was added and MgO was added together. From the experimental results, it is concluded that CBB added NiO-based oxygen carriers are not suitable for chemical looping combustion and a new method to reduce calcination temperature while maintaining high oxygen transfer rate of NiO-based oxygen carriers should be found out.

• 대한화학회지
• /
• 제24권5호
• /
• pp.371-379
• /
• 1980

테트라히드로퓨란(THF)-물 혼합용매에서 용매화된 전자($e^-_s$)를 생성시켜 광흡수스펙트럼의 성질을 연구하였다. 본 연구에서 $e^-_s$는 nsec Q 스위치 Nd(YAG) 레이저 에너지 (265nm)를 이용한 광분해법으로 생성시켰다. 이 방법은 실험부분에서 도면으로 간단하게 기술되어 있다. 측정한 $e^-_s$의 최대흡수 파장은 THF의 함량과 온도에 따라 장파장쪽으로 이동하였고, 흡수스펙트럼의 폭 역시 THF에 따라 증가하였다. $e^-_s$의 반감기 또한 THF의 몰%에 따라 증가하였다. 혼합용매에서 최대 흡수파장은 순수한 물이나 THF에서 방사선 분해법을 측정한 흡수파장의 중간에서 모두 발견되었다. 이러한 실험 결과로부터 $e^-_s$의 체적과 최대흡수에너지 관계를 논의할 수 있었다.

• 대한건축학회논문집:구조계
• /
• 제35권2호
• /
• pp.21-28
• /
• 2019

Handmade hydrated lime has been used for preservation and repair of architectural heritage in Korea. However, the effect of the amount of water used for slaking quicklime on the physical and chemical properties of the hydrated lime, which is the result of the slaking process, has not been clearly understood. In this study, particle size distribution, chemical composition and crystalline phases of the hydrated lime are investigated by varying the amount of water used for the slaking. In addition, temperature history during the slaking process is examined. For this, various experiments, such as laser diffraction analysis, X-ray fluorescence, X-ray diffraction, thermogravimetric analysis, and temperature recording using a thermocouple, were performed. When the quicklime came into contact with water, its temperature reached $100^{\circ}C$ within 10 min due to sudden exothermic reaction of calcium oxide, and this temperature was maintained for about 30 min. The water to lime ratio influenced the cooling rate during the slaking process; that is, the more water was used, the longer it took to reach an ambient temperature. The amount of water for the slaking did not have a noticeable effect on the contents of major components of the hydrated lime such as calcium hydroxide and calcium carbonate, but when slaked with more amount of water, average particle size of the lime tended to decrease. The experimental results in this study can be used as references for developing guidelines on the safety or appropriate amount of water in the lime slaking process.

• 대한안전경영과학회지
• /
• 제16권3호
• /
• pp.101-110
• /
• 2014

This study tried to identify the effects of ergonomic risk factors for absence from work of fire fighters in Korea. A self-administered questionnaire was prepared for this study. The questionnaire consisted of several parts such as 'general information', 'work-related factors', 'physical & chemical risk factors', 'ergonomic risk factors', and 'absence information'. A total of 7,098 fire fighters participated in this study. The data obtained from the survey was mainly analyzed by logistic regression. A total of 856 out of 7,098 fire fighters experienced absence from work. The risk factors such as gender, age, marital status, education level, total work year, work area. position, job rotation, noise, dust, organic solvent, skin contact with chemical substance, toxic waste, regional vibration, manual material handling, continuous standing posture, awkward working posture were associated with absence from work. Specifically, awkward working posture and manual material handling from ergonomic risk factors were major risk factors for absence from work.

• Journal of Plant Biotechnology
• /
• 제31권4호
• /
• pp.279-283
• /
• 2004

백합 (Lilium longiflorum cv. Georgia) 화분의 생장과 agro-infiltration에 의한 일시발현에 대한 물리적, 화학적, 생물적 요인의 영향을 분석하였다 화분을 배지에 섞기 위한 물리적 과정이나 agro-infiltration을 위한 진공작업과정은 정상적 화분생장을 위하여 최소화되는 것이 바람직한 것으로 나타났다. 비교적 넓은 범위에서의 온도 (19 to 27$^{\circ}C$)나 pH(5.0 to 8.0)에서 화분의 생장이 유사하게 진행되었으며 화학적 요인으로서의 cefotaxime (300mg/L), acetosyringone (800 $\mu$M), syringealdehyde (800 $\mu$M) 등의 처리는 화분의 생장에 영향을 나타내지 않았다. 그러나 kanamycin의 경우 매우 심한 생장저해현상을 보였는데 25mg/L의 농도에서도 저해현상을 보이는 경우도 있었다. GUS유전자의 화분발현시 acetosyringone(200-400$\mu$M)의 처리에 의하여 그 효율이 약간 향상되는 것으로 나타났으나 syringealdehyde의 경우에는 효과가 없었다. 짧은 시간 내의 agro-infiltration과정과 이어서 18 hr의 화분 및 박테리아의 동시배양으로서도 acetosyringone의 첨가에 상관없이 화분에서의 GUS 일시 발현결과를 얻을 수 있었다.

• 공업화학
• /
• 제8권2호
• /
• pp.197-203
• /
• 1997

본 연구에서는 폴리우레탄폼 제조시 사용되는 첨가제가 폴리우레탄폼의 기계적 물성에 미치는 영향에 대하여 조사하였다. 실험에 사용된 수지는 KONIX FA-703 폴리에테르폴리올(80%)과, KONIX FA-733 폴리에테르폴리올(20%)에 촉매, 계면활성제, 가교제 등을 혼합하여 제조하였으며, 이 수지에 이소시아네이트(TDI-80, prepolymer M-200, pure MDI)를 당량비로 첨가하여 발포시킨 폼을 상온에서 72시간 경화시킨 후 물성측정에 사용하였다. 폴리우레탄폼의 기계적 물성은 밀도, 인장강도, 인열강도, 신장율, 흡음율 및 gel profile을 조사함으로써 측정하였고, 셀 크기에 대한 계면활성제의 영향은 주사전자현미경(SEM)을 사용하여 측정하였다. 흡음율은 셀의 크기와 직접적인 관련이 있었으며, 계면활성제(L-5309)의 사용량에 따른 인장강도, 인열강도 및 흡음율 등 기계적 물성은 1.0pphp 까지는 첨가량이 많아질수록 증가하는 경향을 보이다가 점차 감소하였다.