• Title/Summary/Keyword: photochromic

Search Result 91, Processing Time 0.033 seconds

Dyeing and Photochromic Properties of Golden Yellow Reactive Dyes (Golden yellow 반응성 염료의 염색성 및 광변색 특성)

  • Lee, Jung-Jin;Kim, Hyun-Sung;Shin, Eun-Suk
    • Proceedings of the Korean Society of Dyers and Finishers Conference
    • /
    • 2011.03a
    • /
    • pp.32-32
    • /
    • 2011
  • 염료의 포토크로미즘은 빛을 받았을 때, 염료의 분자구조가 변환되어 흡수파장이 달라지고 결과적으로 원래 색과 다른 색상을 나타내는 현상을 말한다. 대부분의 Golden yellow 색상을 나타내는 아조계 반응성염료는 Trans-Cis 간의 이성질체 전환을 통해 포토크로미즘 현상을 나타내며, 가역적으로 복색되기는 하지만 상업적으로 많은 문제와 불편을 초래한다. 한편 pyrazolone계 아조염료는 azo form 보다는 hydrazone form으로 더 많이 존재하는 것으로 알려져 있으며, 이로인해 상대적으로 Trans-Cis 이성질화가 잘 일어나지 않아 포토크로미즘 현상이 잘 일어나지 않을 것으로 기대된다. 이 연구에서는 3종의 pyrazolone계 golden yellow 반응성 염료를 합성하고, 합성한 염료를 면직물에 염색하여 염색성 및 견뢰도를 평가하였다. 또한 시판되고 있는 아조계 golden yellow 반응성 염료 4종을 선정하여 역시 염색성과 견뢰도 특성을 알아보았다. 그리고 7가지 염료의 광변색 특성을 조사하기 위해 포토크로미즘 평가방법인 ISO 105-B05법 및 이전 연구에서 제안된 광변색 평가방법을 사용하였다. ISO 105-B05법은 표준청색염포가 grey scale 4등급이 되는 시간을 구한 다음 이 시간의 1/4시간동안 조사한 후 포토크로미즘을 평가하는 것이며, 후자의 경우는 4시간동안 광조사된 시험편을 측색하고 시간에 따른 복색되는 정도를 평가한다. 합성한 pyrazolone계 염료들은 394-408nm의 최대흡수파장은 나타내었다. 7종의 yellow 반응성 염료들은 모두 면직물에 우수한 염색성 및 build-up성을 나타내었으며, 대체적으로 양호한 견뢰도를 얻었다. 또한 광변색 특성 평가결과 모든 염료들은 ISO 평가방법에 대하여 non-photochromic 특성으로 나타났으나, 다른 광변색 평가 결과 일부 염료들에 있어서 photochromic 특성이 있는 것으로 나타나 평가방법에 따라 차이를 보였다.

  • PDF

Visible photochromic energy shift of $WO_{3}$/CdS thin films fabricated by thermal evaporation method (진공증착 법으로 제작한 $WO_{3}$/CdS 박막의 가시광 광 변색의 에너지 전환)

  • Kim, Keun-Mook;Kim, Myung-Wook
    • Journal of the Semiconductor & Display Technology
    • /
    • v.4 no.1 s.10
    • /
    • pp.29-34
    • /
    • 2005
  • Tungsten oxide($WO_{3}$) is suitable to materials for photochromic window in the visible region. The resistivities of CdS, $WO_{3}$, and $WO_{3}$/CdS films prepared by thermal evaporation method were $4.61\times 10\^{3}$, $7.59\times10^{3}$, and $6.29\times10^{3}$ $\omega$ cm. And x-ray diffraction patterns of CdS, $WO_{3}$/CdS films showed a preferred orientation of hexagonal(002), and the monoclinic(020) structure, respectively. The optical transmission were measured that the cut-on wavelength were 510nm, 380nm for CdS and $WO_{3}$ films respectively, and the transmission spectrum of $WO_{3}$/CdS was shifted into the visible region. Photoluminescence(PL) spectra showed the two peaks at 2.8 eV and 3.2 eV for the as-grown sample($WO_{3}$/CdS ($500{\AA}$), but the other sample($WO_{3}$/CdS ($1000{\AA}$)) had a peak energy value of 2.8 eV. The photochromism of $WO_{3}$/CdS films showed that the excitation of electron-hole pairs and subsequent coloration is shifted into visible-light range. And the spectral behavior of coloration turned out to be proportional to the excited electron-hole pairs creation rate of CdS film. This result is interpreted in terms of charge carrier injection from the CdS-layer into the $WO_{3}$ films. We found a value of about 2.8 eV of $WO_{3}$/CdS film which is somewhat higher than peak energy of 2.54 eV using CBD prepared by Bechinger et. al.

  • PDF

Preparation and Characterization of Photochromic Organic-Inorganic Hybrid Coating Using 1,2-Bis(2,4-dimethyl-5-phenyl-3-thienyl)3,3,4,4,5,5-hexafluoro-1-cyclopentene (1,2-Bis(2,4-dimethyl-5-phenyl-3-thienyl)-3,3,4,4,5,5-hexafluoro-1-cyclopentene을 사용한 유-무기 혼성 광 변색 코팅 막의 제조 및 특성)

  • Lee, Chang-Ho;Lee, Sang-Goo;Lee, Jong-Dae
    • Polymer(Korea)
    • /
    • v.36 no.1
    • /
    • pp.16-21
    • /
    • 2012
  • Organic-inorganic hybrid coating film using 1,2-bis(2,4-dimethyl-5-phenyl-3-thienyl)-3,3,4,4,5,5-hexafluoro-1-cyclopentene (BTHFC) as a photochromic material was prepared under various reaction conditions such as the amounts of tetramethoxysilane (TMOS), various silane coupling agents, and solvent. It was found that color-fading speed and absorbance of the coating film was strongly dependent upon the polarity of silane coupling agent and solvent. In addition, the mole ratio of TMOS and methacryloyloxypropyltrimethoxysilane (MPTMS) was an important factor to determine color-fading speed and absorbance of the coating film. With increasing TMOS contents in coating film, the pencil hardness was increased. On the other hands, the transmittance of coating film was relatively decreased with the increase of TMOS.

Photochromic lens for patients with photophobia and estimation of clinical trial efficacy (광시증 환자를 위해 개발된 광변색렌즈와 임상 효과 평가)

  • Ha, Jin-Wook;Yu, Dong-Sik
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.10 no.1
    • /
    • pp.27-34
    • /
    • 2005
  • Photochromic lens is the color changing lens from colorlessness to colorness when exposed to UV light. It can protect eyes from UV-B light which cause the cataract and can be used as sunglass in the summer since it can cut off 70~80% of sun light. Surface coating technique was used to develop lens which has 70% light transmittance and of which fading time of color change is within 5 min. Various color lenses were developed so that these had various color such as blue, green, brown, violet, yellow and red etc. Lens has an excellent physical properties, 100% adhesion and 4~5H hardness. The chemical and the scratch resistance of this lens were the greatest and the thermal stability was also higher. The clinical trial of developed lens were applied to 65 patients who had photophobia by various reasons at ophthalmology of Soonchunhyang University Hospital. Results showed that glaring was significantly reduced and the visual health were remarkably improved. Especially, anti-glaring effect in the night was great for the patient who had the LASIK operation. Protection of UV-B and blue light also can prevent the patient from cataract and the yellowish crystalline lens at old ages. Through the result of clinical. trial, we know that photochromic lens could be a new technique for both cure and precaution of photophobia.

  • PDF