• Applied Chemistry for Engineering
• /
• v.19 no.3
• /
• pp.351-356
• /
• 2008

Titania nanoparticles were prepared by controlled hydrolysis of titanium tetraisopropoxide (TTIP) in water-in-oil (W/O) and microemulsion stabilized with a nonionic surfactant, N P-10 (Polyoxyethylene Nonylphenol Ether: $C_9H_{19}C_6H_4(OCH_2CH_2)_{10}OH$)). The nanosized particles prepared in W/O microemulsion were characterized by FT-IR, TEM, XRD, TGA, and DTA. In addition, the photocatalytic degradation of p-nitrophenol has been studied by using a batch reactor in the presence of UV light in order to compare the photocatalytic activity of prepared nanosized titania. The nanaosized titania particles calcined at $300{\sim}600^{\circ}C$ showed an anatase structure, but it transformed to a rutile phase above $700^{\circ}C$ of calacination temperature. With an increase of $W_o$ ratio, the crystallite size increased but photocalytic activity decreased. The titania synthesized at $W_o=5$, R = 2, and calcined at $400{\sim}500^{\circ}C$ showed the highest activity on the photocatalytic degradation of p-nitrophenol.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.10
• /
• pp.1129-1135
• /
• 2005

In this study. the applicability of a rotating reactor for the oxidative removal of aqueous humic substances extracted from the Han River in Seoul, Korea was investigated. As air blowing for proper mixing of $TiO_2$ photocatalyst could inhibit UV-irradiation between a UV lamp and photocatalyst by air bubbles, a rotating reactor with some baffles was used for better UV-irradiation effect in this study. Han River humic substances are different from the other commercial humic substances(e.g., from Aldrich and International Humic Substance Society). Their characteristics were investigated with structural and spectroscopic analyses using FT-IR(Fourier transform-infrared), and $^{13}C$-NMR (nuclear magnetic resonance). The humic substances were extracted by XAD-7HP and treated with $TiO_2$-coated hollow beads under UV-A and UV-C irradiation in order to solve problems of separation and recovery of photocatalyst after reaction. At approximately 5 mg/L of initial TOC concentration, pH 3 and $2.0\;g-TiO_2/L$ dose, photocatalytic oxidation of Han River humic substances showed the optimum removal efficiency. Also, UV-C and UV-A lamps showed similar TOC removal efficiency. However, under UV-C irradiation, Han River humic substances were degraded to smaller compounds and increased the proportion of low molecular weight fractions compared to UV-A.

• Membrane Journal
• /
• v.6 no.2
• /
• pp.101-108
• /
• 1996

The oxidation/degradation efficiency of formic acid through the photoelectrochemical reaction has been investigated as a basic research in order to develope the process for degrading toxic organic compounds dissolved in water. A $TiO_{2}$ photoelectro-membrane reactor for purification of water, in which filtration as well as photoelectrocatalytic oxidation of organic compounds could be carried out simultaneously, was developed. Porous $SnO_{2}$ tubes prepared by slip casting and commercial porous stainless steel tubes, being electrically conductive, were used as not only supports but also working electrodes. The UV light with the wavelength of 365 nm was applied as a light source for photocatalytic reactions. The photoelectrocatatytic composite membranes were prepared by coating the support surface with the $TiO_{2}$ sol of pH 1.45. The oxidation efficiency of formic acid increased with the reaction time and the applied voltage, but was almost independent of the solution flux. The results showed that more than 90% of formic acid could he dograded at 27V using the $TiO_{2}$/stainless steel composite membrane, while about 77% in case of the $TiO_{2}/SnO_{2}$ Composite membrane. It was also concluded that the oxidation efficiencies of formic acid could be significantly improved by about 6~7 times by the photoelectrochemical reaction in comparison with those by the photocatalytic reaction only.

• Clean Technology
• /
• v.28 no.4
• /
• pp.285-292
• /
• 2022

Adsorption tower systems based on activated carbon adsorption towers have mainly been employed to reduce the emission of volatile organic compounds (VOCs), a major cause of air pollution. However, the activated carbon currently used in these systems has a short lifespan and thus requires frequent replacement. An approach to overcome this shortcoming could be to develop metal oxide photocatalysis-activated carbon composites capable of degrading VOCs by simultaneously utilizing photocatalytic activation and powerful adsorption by activated carbon. TiO₂ has primarily been used as a metal oxide photocatalyst, but it has low economic efficiency due to its high cost. In this study, ZnO particles were synthesized as a photocatalyst due to their relatively low cost. Silver nanoparticles (Ag NPs) were deposited on the ZnO surface to compensate for the photocatalytic deactivation that arises from the wide band gap of ZnO. A microfluidic process was used to synthesize ZnO particles and Ag NPs in separate reactors and the solutions were continuously supplied with a pack bed reactor loaded with activated carbon powder. This microfluidic-assisted pack bed reactor efficiently prepared a Ag-ZnO-activated carbon composite for VOC removal. Analysis confirmed that Ag-ZnO photocatalytic particles were successfully deposited on the surface of the activated carbon. Conducting a toluene gasbag test and adsorption breakpoint test demonstrated that the composite had a more efficient removal performance than pure activated carbon. The process proposed in this study efficiently produces photocatalysis-activated carbon composites and may offer the potential for scalable production of VOC removal composites.

• Rapid Communication in Photoscience
• /
• v.2 no.2
• /
• pp.64-66
• /
• 2013

Photoreduction of $CO_2$ into hydrocarbon fuels on the surface of photocatalyst is one of the breakthroughs in the field of photocatalysis. At present various approaches have been investigated with the aim of increasing the $CO_2$ conversion efficiency. The reactor for photoconversion of $CO_2$ plays a vital role in experimental setup. In this work an attempt was made to testify a newly designed the photoreactor for conversion of $CO_2$ into useful products. The photoreactor was specifically designed for simple operation bearing features of temperature and pressure control. The reactor has been tested successively with the standard titania, Degussa P25 yielding methane with moderate production rate of 30.8 $ppm{\cdot}g^{-1}{\cdot}h^{-1}$ under UV lamp with 365 nm wavelength. The methane yield obtained is comparable to the values reported in literature. Thus we anticipate that this experimental setup equipped with newly designed photoreactor can yield competitive amounts of fuels from $CO_2$ photoredcution via 365 nm UV light illumination on various photocatalysts.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.284-284
• /
• 2010

Currently, hydrogen has been produced by Steam Reforming or partial oxidation reforming processes mainly from oil, coal, and natural gas and results in the production of $CO_2$. However, these are influenced greatly on the green house effect of the earth. so it is important to find the new way to produce hydrogen utilizing water without producing any environmentally harmful by-products. In our research, we use microwave water plasma and photocatalyst to improve dissociation rate of water. At low pressure plasma, electron have high energy but density is low, so temperature of reactor is low. This may cause of recombination in the generated hydrogen and oxygen from splitting water. If it want to high dissociation rate of water, it is necessary to control of recombination of the hydrogen and oxygen using photocatalyst. We utilize the photocatalytic material($TiO_2$, ZnO) coated plasma reactor to use UV in the plasma. The quantity of hydrogen generated was measured by a Residual Gas Analyzer.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.152-156
• /
• 2016

Experimental research on the preparation of photocatalyst for the decomposition of brilliant blue FCF ($C_{37}H_{31}O_9N_2S_3Na_2$) was performed. $TiO_2$ and ZnO powders were prepared from titanium (IV) sulfate and zinc acetate at low reaction temperature and atmospheric pressure by hydrothermal precipitation method without calcination. In addition, $TiO_2$ was prepared with cationic surfactant CTAB (Hexadecyltrimethyl ammonium bromide) at the same conditions. The physical properties of prepared $TiO_2$ and ZnO, such as crystallinity, average particle size and absorbance, were investigated by XRD, Zeta-potential meter and DRS. And, the photocatalytic degradation of brilliant blue FCF has been studied in the batch reactor under UV radiation. For the photocatalysts prepared without CTAB, $TiO_2$ has smaller particle size and larger absorbance and photocatalytic reaction rate than ZnO. And $TiO_2$, prepared with CTAB whose concentration is 1/10 of that of precursor, shows 15% higher than that prepared without CTAB in final photocatalytic degradation ratio of brilliant blue FCF.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1993.10a
• /
• pp.39-39
• /
• 1993

반도성 세라믹 광촉매 막 반응기 (membrane reactor)에 의한 난분해성 유독 유기물질의 분해공정을 개발하기 위한 기초연구로서 $TiO_2$ 막 반응기의 formic acid 및 trichloromethane에 대한 광분해 효율이 연구되었다. 막 반응기는 용액의 정밀여과 (microfiltration)는 물론 유기물의 광분해를 동시에 수행할 수 있도록 다공성 $TiO_2$ 튜브 (평균기공 : $0.2 \mu m$)를 이용한 새로운 타입으로 ㅐㄱ발되었으며 광원으로는 365 nm 파장을 갖는 UV를 사용하였다. 또한 반응기의 광분해 효율을 증진시키기 위하여 슬립케스팅법으로 제조한 $TiO_2$ 튜브표면을 $TiO_2$ 졸로 코팅하였다.

• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.5
• /
• pp.521-528
• /
• 2000

Photocatalyzed degradation of trace level trichloroethylene(TCE) and toluene in air was carried out over near UV illuminated titanium doxide(anatase) pellet in a flow reactor. The authors investigaed the effects of humidity and trace contaminant levels on the oxidation rates of toluene. Inlet concentrations of TCE and toluene were 10∼100ppm. TCE photooxidation was very rapid under what conditions, and almost 100% conversion was achieved for TCE(up to 70 ppm) as a single air contaminant. An important finding was that competitive adsorption between humidity and trace contaminants has a significant effect on the oxidation rate of what.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.10a
• /
• pp.233-234
• /
• 1999

현대사회는 교통량의 증가와 산업시설의 증가로 인해 각종 대기오염물질과 함께 휘발성유기화합물 (Volatile Organic Compounds, 이하 VOCs)에 의한 대기오염이 점점 더 심각해지고 있다. 하지만 기존의 VOCs 처리장치는 비용이 고가이고 운전하는데 있어서도 어려움이 많은 것으로 알려져 있다. 이에비해 광촉매 반응장치는 현재 수처리에서 고급산화법의 한 공정으로 침출수나 염색폐수, 제지폐수 등에 있는 난분해성 물질들의 처리에 적용하여 큰 효과가 있는 것으로 보고되고 있으나 대기오염물 처리에 적용하여 큰 효과가 있는 것으로 보고되고 있으나 대기오염물 처리에 대한 국내연구는 그 사례가 적고 또한 기초단계에 있다.(중략)