• 제목/요약/키워드: photo composition

검색결과 118건 처리시간 0.02초

레이저 CVD법에 의해 퇴적된 OXYNITRIDE막의 기판세정법에 따른 특성에 관한 연구 (A study on the electrical properties by the effect of wafer cleaning of OXYNITRIDE films deposited by Laser CVD)

  • 김창덕;이상권;김태훈;성영권
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1997년도 하계학술대회 논문집 C
    • /
    • pp.1280-1282
    • /
    • 1997
  • The oxynitride films were photo-chemically deposited by ArF(wave length: 193nm) excimer laser CVD used to excite and dissociate gas phases $Si_2H_6$, $N_2O$, and $NH_3$ molecules. We obtained various electrical properties when we varied wafer cleaning procedures consisted of a conventional RCA and a two-dip step[4]. The results show the films have low leakage currents and good TZDB properties. We also analyzed the composition of the oxynitride films which have homogeneous composition throughout the film.

  • PDF

R.F 마그네트론 스퍼트링으로 작성된 $TiO_2$박막의 $NO_x$ 감지 특성 ($NO_x$ Sensing Characteristic of $TiO_2$ Thin Film Deposited by R.F Magnetron Sputtering)

  • 고희석;박재윤;박상현
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제51권12호
    • /
    • pp.567-572
    • /
    • 2002
  • In these days, diesel vehicle or power plant emits $NO_X\; and SO_2$ which cause air pollution like acid-rain, ozone layer destroy and optical smoke, therefore there are many kinds of methods considered for removing them such as SCR, catalyst, plasma process, and plasma-catalyst hybrid process. T$TiO_2$ is commonly used as catalyst to remove $NO_X$ gas because it have very excellent chemical characteristic as photo catalyst. In this paper, $NO_X$ sensing characteristic of $TiO_2$ thin film deposited by R.F Magnetron sputtering is investigated. A finger shaped electrode on $Al_2$O$_3$ substrate is designed and $TiO_2$ is deposited on the electrode by the magnetron sputtering deposition system. Chemical composition of the deposited $TiO_2$ thin film is $TiO_{1.9}$ by RBS analysis. When the UV is irradiated on it with flowing air, capacitance of $TiO_2$ thin film increases, however, when NO gas is put into the system with air, it immediately decreases because of photo chemical reaction. and it monotonously decreases with increasing NO concentration.

Ink Binder용 UV 경화형 조성물의 제조 및 특성 (Preparation and Properties of UV Curable Urethane Acrylates for Ink Binder)

  • 박현주;한창덕;오상택
    • 접착 및 계면
    • /
    • 제14권4호
    • /
    • pp.167-174
    • /
    • 2013
  • 본 연구에서는 ink binder용으로 isophorone diisocyanate (IPDI)/polyether polyol/2-hydroxyethyl acrylate (HEA)계 UV 경화형 우레탄 아크릴레이트를 중합하였다. HEA/PETA 혼합 비율을 달리한 조성물의 UV 조사 시간에 따른 광경화거동을 FT-IR spectrophotometer, probe tack tester 및 Photo-DSC로 확인하였다. UV 조사 시간이 증가함에 따라 전환률 및 gel content는 증가하였으며 probe tack은 감소하였다. 반응성 희석제로 사용한 PETA 함량이 증가함에 따라 저장탄성률, 인장강도 및 초기분해 온도가 증가하였다. HEA/PETA 비율이 30/70인 경우 UV 경화 후 PMMA sheet에 대한 부착특성이 가장 우수하였다.

졸-겔법에 의한 SiO2-TiO2 박막의 초친수성 (Super Hydrophilic Properties of SiO2-TiO2 Thin Film Prepared by Sol-Gel Method)

  • 박민정;이경석;강종봉;문종수
    • 한국재료학회지
    • /
    • 제17권3호
    • /
    • pp.125-131
    • /
    • 2007
  • [ $TiO_{2}-solution$ ] was aaded in $SiO_{2}-solution$ by various composition. $SiO_{2}-TiO_{2}$ thin films were obtained by the dip-coating method on the $SiO_{2}$ glass substrates, and then heat-treated at various temperature. Nano-size $TiO_{2}$ particles dispersed $SiO_{2}-TiO_{2}$ films showed absorption peak by quantum size effect at short wavelength region $350{\sim}400nm$, which made them good candidates for non-linear optical materials and photo-catalytic materials. The thickness of $SiO_{2}-TiO_{2}$ films were $300{\sim}430nm$. The contact angle of $SiO_{2}-TiO_{2}$ films for water was $5.3{\sim}47.9^{\circ}$, and therefore it is clear that $SiO_{2}-TiO_{2}$ films have super hydrophilic properties and the self-cleaning effects.

A One-Component Negative Photoresist Based on an Epoxy Terpolymer Containing Oxime-Urethane Groups as a Photobase Generator

  • Chae, Kyu-Ho;Park, Jin-Hee
    • Macromolecular Research
    • /
    • 제12권4호
    • /
    • pp.352-358
    • /
    • 2004
  • For their application as one-component photoresists, we prepared epoxy terpolymers containing oxime-urethane and benzophenone groups by the radical polymerization of glycidyl methacrylate (GMA), metha-cryloxyethyl benzophenoneoxime urethane (MBU), and N-(4-benzoyl)phenylmaleimide (BPMI). The terpolymer composition was optimized to provide the most photosensitive photoresist. The photo-decomposition reaction of the oxime-urethane groups in the terpolymer was monitored by UV absorption spectroscopy, and the photo-crosslinking reaction of the epoxy terpolymer was observed by measuring the normalized thickness. The photosensitivity of the epoxy terpolymer increased as the amount of BPMI and MBU units increased up to 16 and 24 mol%, respectively. Among the terpolymers we prepared, terpolymer T-II(contents of GMA, MBU, BPMI are 75, 19, 6.1 mole%, respectively) exhibited the highest photosensitivity ( $D_{c}$ $^{0.5}$ = 430 mJ/$\textrm{cm}^2$) and had a moderate contrast (${\gamma}$$^{p}$ = 1.23). Negative-tone micropatterns having a line width of ca. 10 ${\mu}{\textrm}{m}$ were obtained by developing the system with chloroform.m.

수상 태양광 발전 시스템의 부유체 형상과 구성요소가 수력학적 안전성에 미치는 영향 (Effect of the floating body shape and other composition on the hydrodynamic safety of floating photo-voltaic system)

  • 최지웅;이규한;김재운;허남욱;차용현;하호진
    • 한국가시화정보학회지
    • /
    • 제19권1호
    • /
    • pp.18-27
    • /
    • 2021
  • As the photo-voltaic (PV) industry grows, the floating PV has been suggested to resolve current environmental destruction and a lack of installation area. Currently, various floating PV systems have been developed, but there is a lack of studies on how the shape of the floating body and other compositions are affecting structural behavior. In this study, the behavior of the floating PV was investigated at the various length of mooring lines, stiffness of connecting hinges, and size of floating bodies. The shortest mooring lines with the distributed type floating PV showed the least force on the floating body and corresponding motion. A frictionless hinge is safer at the regular and low-height wave, while a stiff hinge is safer at irregular and high-height wave. In addition, due to the bi-axial distribution of the connecting hinge, 45° direction wave was found to be the most dangerous.

프로페닐 에테르 단량체들의 합성과 광중합 특성 (Synthesis and Photopolymerization Characterization of Propenyl Ether Monomers)

  • 김기상;심상연
    • 한국응용과학기술학회지
    • /
    • 제34권2호
    • /
    • pp.203-209
    • /
    • 2017
  • 양이온계 광중합에 적용 가능한 propenyl ether 형태의 단량체들을 mono 및 di-functional alcohol과 allyl bromide의 축합반응으로 합성하였다. 이들 단량체들을 양이온 광개시제와 혼용하여 코팅조성물을 제조하여 광경화 반응성을 조사하였다. 그 결과 mono propenyl ether 형태인((prop-1-en-1-yloxy)methyl)benzene (POMB)는 dipropenyl ether 계인 1,4-bis(prop-1-en-1-yloxy) benzene (BPOB) 비교하여 초기 중합 속도는 10.2로 상대적으로 낮게 나타났으나 1.5mol%의 광개시제를 포합한 배합물에서는 90초이내에 거의 정량적으로 반응하였다. 또한 긴알킬기를 갖는 술폰산 염계 광개시제들은 단량체들에 빠른 용해 특성을 나타내었고 산성도가 높은 광개시제인(4-n-decyloxyphenyl)diphenylsulfonium hexafluoroantimonate(DPSA)와 (4-n-decyloxyphenyl) diphenylsulfonium triflate (DPST)를 사용한 경우 비교적 높은 중합속도와 전환율을 나타내었다.

수정된 사진방형구법을 이용한 조하대 해조류의 군집구조 분석 (An Analysis of Subtidal Macroalgal Community Structure Using a Modified Photo Quadrat Method)

  • 김영대;박미선;문태석;안중관;김수지;김영환
    • 한국수산과학회지
    • /
    • 제44권3호
    • /
    • pp.298-307
    • /
    • 2011
  • The species composition and distributions of subtidal marine algae on the east coast of Korea were studied. We examined all species found in permanent quadrats at three depths (3 m, 5 m and 10 m) at Sacheon between October 2008 and December 2009. Coverage and frequency data were collected monthly via underwater photography and analyzed using a modified photo quadrat method. Of the 82 species identified, 10 were chlorophytes, 21 were phaeophytes, 50 were rhodophytes, and one was a seagrass. The largest number of species (59) was found 10 m deep, while the fewest (39) species were present at 5 m. A total 17 species (two green, five brown, and 10 red algae) occurred at all three depths. The vertical distribution of the study site was characterized by the melobesioidean algae, Ulva pertusa, Sargassum confusum, Phyllospadix iwatensis, and Codium arabicum at 3 m deep, melobesioidean algae and U. pertusa at 5 m deep, and Corallina pilulifera, Prionitis cornea, Chondracanthus tenellus and melobesioidean algae at 10 m deep. Given that coralline algae such as melobesioidean algae and C. pilulifera play important roles in coastal ecosystems, thorough studies on the spatial and temporal variations of coralline algae and the dynamics of marine algal communities on the east coast of Korea are now required.

인공지능 기반의 스톡사진 웹 서비스 콘텐츠 개발 (Contents Development of Web Services for Artificial Intelligence-based Stock Photos)

  • 이아림;임찬
    • 한국콘텐츠학회논문지
    • /
    • 제19권2호
    • /
    • pp.1-10
    • /
    • 2019
  • 본 연구는 현재 서비스 되고 있는 인터넷 기반 스톡이미지 에이전시에 스톡 사진 업로드에서 발생하는 문제점을 확인하고 이의 기술적 해결을 위한 웹 서비스 기술 개발을 목적으로 진행된 연구이다. 선행연구와 현재 해당 서비스를 진행하고 있는 주요 3사의 스톡 사진 업로드 시스템을 통해 발견된 문제에 따라 다음과 같은 사항을 중점으로 웹 서비스 기술을 개발 했다. 첫째, 편리성의 확보를 위해 자동 테그 시스템을 적용하였다. 둘째, 안전성의 확보를 위해 초상권 침해 방지, 상표권 침해 방지를 손쉽게 적용할 수 있는 기술을 적용하였고, 유해성에 대응할 수 있는 부분을 확보하였다. 셋째, 완전성의 확보를 위해 업로드 도중 빈번하게 발생되는 업로드 실패문제를 개선할 수 있는 방안을 적용하였다. 특히 본 연구 개발은 인공지능 기반의 이미지 처리 기술인 Google Cloud Vision API를 통한 자동 사진 분석 시스템을 적용하고 있고, SNS 형태의 화면 구성으로 사용자의 접근성을 높이는 방향에서 웹 서비스 프로그램을 개발하였다는 의의를 가지고 있다.

360 영상으로부터 텍스트 정보를 이용한 자연스러운 사진 생성 (Natural Photography Generation with Text Guidance from Spherical Panorama Image)

  • 김범석;정진웅;홍은빈;조성현;이승용
    • 한국컴퓨터그래픽스학회논문지
    • /
    • 제23권3호
    • /
    • pp.65-75
    • /
    • 2017
  • 360 영상은 상하좌우 모든 영역에 대한 정보를 갖고 있기 때문에 종종 지나치게 많은 정보를 포함하게 된다. 또한 360 영상의 내용을 2D 모니터를 이용하여 확인하기 위해서는 마우스를 이용하여 360 영상을 돌려 봐야 하거나, 또는 심하게 왜곡된 2D 영상으로 변환해서 봐야 하는 문제가 있다. 따라서 360 영상에서 사용자가 원하는 물체를 찾는 것은 상당히 까다로운 일이 될 수 있다. 본 논문은 물체나 영역을 묘사하는 문장이 주어졌을 때, 360 영상 내에서 문장과 가장 잘 어울리는 영상을 추출해 내는 방법을 제시한다. 본 논문에서 제시한 방법은 주어진 문장 뿐 아니라 구도 역시 고려하여 구도 면에서도 보기 좋은 결과 영상을 생성한다. 본 논문에서 제시하는 방법은 우선 360 영상을 2D 큐브맵으로 변환한다. 일반적인 큐브맵은 큐브맵의 경계 부분에 걸쳐 있는 물체가 있을 경우, 이를 검출하기 어려운 문제가 있다. 따라서 더 정확한 물체 검출을 위해 본 논문에서는 변형된 큐브맵을 제시한다. 이렇게 변형된 큐브맵에 Long Short Term Memory (LSTM) 네트워크 기반의 자연어 문장을 이용한 물체 검출 방법을 적용한다. 최종적으로 원래의 360영상에서 검출된 영역을 포함하면서도 영상 구도 면에서 보기 좋은 영역을 찾아서 결과 영상을 생성한다.