• 한국세라믹학회지
• /
• 제52권3호
• /
• pp.221-223
• /
• 2015

In this work, we report on the preparation of the anodically-grown $TiO_2$ nanotube arrays sensitized with $In_2S_3$ nanoparticles by using the SILAR (successive ionic layer adsorption and reaction) process. We evaluate the photo-catalytic properties of the prepared hetero-structures under visible-light illumination. The results reveal that the $TiO_2/In_2S_3$ system has enhanced photo-catalytic characteristics including higher chopping height. Improved performance of the heterojunction is attributed to the narrower band gap of $In_2S_3$ and its favorable position within the conduction band relative to that of $TiO_2$.

• 한국전기전자재료학회논문지
• /
• 제18권6호
• /
• pp.510-514
• /
• 2005

We have investigated the excitation-light source dependence of photo-catalytic efficiency for the benzene removal. The photo-catalytic module for the benzene removal is fabricated by a combination of GaN-based ultraviolet light-emitting diode (UV GaN-LED) and $TiO_2$ thin film coated on an aluminum plate. The benzene reduction rates of 365 nm and 375 nm modules at 60 mA junction current are approximately $8.95\;\%/Hr$ and $9.2\;\%/Hr$, respectively, which indicates that 365 nm GaN-LED is more effective than 375 nm GaN-LED. The benzene reduction efficiency is also noticeably dependent on the excitation wavelength and excitation-light power, as well as it is increased with the shorter wavelength and higher excitation power. This result exhibits that UV GaN-LED is useful to remove the volatile organic compounds (VOCs) existing in the environment.

• 한국대기환경학회지
• /
• 제21권4호
• /
• pp.431-438
• /
• 2005

In order to apply the photocatalytic decomposition of aromatic VOCs, adsorbent prepared from MSWI fly ash was coated by $TiO_2$ solution to endow with photo-catalytic function. The effects of coating number, existence of light source and the type of $TiO_2$ solution used for coating were examined. Adsorbent coated with amorphous $TiO_2$ solution showed higher adsorptivity than adsorbent coated with crystal $TiO_2$ solution. Without light source, breakthrough curve of photo -catalyst absorbent for VOCs removal was similar to that of absorbent made from MSWI fly ash. On the other hand, breakthrough time was enlarged with light source and total removal efficiency of benzene and toluene was also increased. It can be explained as photo-decomposition effect of $TiO_2$ photo-catalyst. Total removal efficiency of benzene and toluene was increased according to the increase of coating number with light source. It was due to the effect of adsorption and photo reaction of photo-catalytic adsorbent. But total removal efficiency of benzene was lower than that of toluene. Because benzene was removed more effectively than toluene by adsorption, but photo - decomposition effect oi toluene was more high than benzene.

• 한국세라믹학회지
• /
• 제51권1호
• /
• pp.1-6
• /
• 2014

Here we report improved photo-catalytic effect of $Ag_2S$ under visible light using carbon nano-tubes (CNT) modified with $Ag_2S$ nanoparticles. The optical properties, structural properties and compositional analysis, as well as the photo-electrochemical properties of the prepared composites were investigated. It was found that the photocurrent density, and the photo-catalytic effect, was increased by modification of CNT in this way. Compared with the separate effects of $Ag_2S$ and CNT nanoparticles, the photocatalytic effect of CNT-modified-with-$Ag_2S$ composites, increased significantly due to a synergistic effect between the CNT and the $Ag_2S$ nanoparticles.

• 대한수의학회지
• /
• 제46권3호
• /
• pp.279-284
• /
• 2006

Photo-catalytic products have been widely used at home and hospital to prevent bacteria, virus and fungus. Activities of anti-bacteria, anti-viruses and anti-fungi are based upon direct contact of crystals and particles of titanium dioxide with pathogens, into which titanium is catalyzed by photo. Those antimicrobial activities of the photo-catalytic titanium dioxide have been proved in vitro. However, in vivo tests of those activities have not been carried out on dog skin. Aim of this study was to evaluate the antimicrobial activities of the catalytic titanium dioxide in vivo. Ten beagle dogs were divided into two groups. One group was sprayed with 10ml of titanium dioxide(1 mg/ml) whereas the other was not. The treated dogs were exposed under the sunlight for 120 min. A set of three hairs was taken 15, 30, 60 and 120 min after the exposure and the bacteria contaminated in hairs were amplified in, Muller Hilton broth at $35^{\circ}C{\pm}1$ for 3 h. The supernatant of the bacterial culture was diluted 1 : 10 in phosphafe-buffered saline. One milliliter of the diluents was transferred into triphenyltetrazolium medium(TTC) and incubated at $35^{\circ}C{\pm}1$ for 2 days. The number of bacteria was counted. The number of bacteria colonies was decreased compared to control group. To further investigate the longevity effect of titanium dioxide, the dogs were kept in indoor without sun light for 6 and 12 h, 1, 2, 3, 7, 14 days after exposure of the chemical during each 15, 30, 60 min. The number of bacteria colony in 1ml was counted. The number of bacterial colonies was decreased. Treated group is exposured by sun light during 15 min, the longevity effect of titanium dioxide is continued by 1 week. Treated group is exposured by sun light during 30, 60 min, the longevity effect of titanium dioxide is continued over 2 weeks. These data indicated that the photo-catalytic titanium dioxide may be used for prevent bacteria on dog skin.

• 한국광물학회지
• /
• 제28권1호
• /
• pp.29-38
• /
• 2015

광석에서 순도 높은 금은을 추출하기 위해 사용된 청화법으로부터 시안이 유출되어 광석 내 존재하는 중금속들과 결합하여 다양한 형태의 시안화합물이 생성된다. 이러한 시안화합물은 난분해성 오염물질로서 인간을 포함한 생태계에 악영향을 끼친다. 결합력에 따라서 중금속과 결합한 시안화합물은 공유결합성 화합물(weak acid dissociable, WAD)과 착화합물(strong acid dissociable, SAD) 등으로 분류할 수 있다. 본 연구에서는 시안화합물의 존재 형태별 광촉매 산화 효율을 비교 평가하였다. 특히 자외선 LED 광원의 파장과 광촉매 표면 개질이 시안화합물의 분해에 미치는 영향을 살펴보았다. 실험 결과, 동일한 광촉매 산화 조건에서 자유 시안보다는 중금속과 결합한 시안화합물의 광산화 분해 효율이 떨어짐을 알 수 있었다. 그리고 자유 시안의 경우에는 짧은 파장에서 광촉매 산화가 효과적이었지만 중금속과 결합한 시안화합물의 경우에는 긴 파장에서 광산화 분해능이 더 높게 나타났다. 그리고 광촉매 표면 개질에 의하여 광촉매 산화 공정의 성능을 향상시킬 수 있음을 확인하였다.

• 한국세라믹학회지
• /
• 제45권6호
• /
• pp.331-335
• /
• 2008

The purpose of this study is to characterize the photo-catalytic efficiency of $TiO_2$ nanotube with respect to the distribution of anatase phase which can be changed by the annealing temperature of $TiO_2$ nanotube. $TiO_2$ nanotube was fabricated by the anodization method in the 0.5 wt% HF electrolyte. And then the $TiO_2$ nanotube was annealed at temperatures ranging from $380^{\circ}C$ to $780^{\circ}C$ in dry oxygen ambient for 2 h. For the photo-catalytic water-splitting tests, the photocurrent density was measured as a function of applied potential with a potentiostat using a Ag/AgCl reference, Pt counter electrode, and 1 M KOH electrolyte under illumination of UV by a Xe arc lamp of 1 KW. According to the UV photo-catalytic water-splitting tests, the nanotube annealed at $560^{\circ}C$ was found to show the highest photocurrent density.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVI)
• /
• pp.287-292
• /
• 2005

Hybrid시스템의 운전결과 황화수소의 removal efficiency는 황화수소의 inlet load가 $200g/m^{3}/h$에서 removal efficiency가 급격히 감소하여 약 60%의 수준을 유지하였다. 또한 톨루엔에 대한 removal efficiency는 거의 100%를 유지하다가 톨루엔의 inlet load가 $644g/m^{3}/h$로 증가할 때에는 약 60%로 감소하였다. 이와 같은 Hybrid시스템 운전결과로 부터 바이오필터만을 이용하여 황화수소와 톨루엔을 동시처리할 때보다 removal efficiency가 제고되었음이 관찰되었다.

• 한국환경보건학회지
• /
• 제26권3호
• /
• pp.61-68
• /
• 2000

The use of photo-catalytic processes in pollution abatement and resource has a significant economic importance. Therefore, the applications of photochemical oxidation of secondary effluent driven by UV, TiO2, TiO2/UV, H2O2/UV and TiO2/H2O2/UV, have been investigated in order to treat the secondary effluent from municipal sewage. Various experimental parameters such as BOD, CODcr, Nurbidity, total P, and SPC were examined in each photo-catalytic reaction system. The results showed that the application of single oxidant such as UV, TiO2 only has a minor effect on parameters reduction (CODcr, BOD, etc) to treat the secondary effluent, whereas the combinations of oxidants increase the removal efficiency. The best removal efficiency in every parameters was achieved by the combination of TiO2, H2O2 and UV. It was also found that the optimum amount of TiO2 for the treatment was 1g/ι to achieve water reuse standard. From the results, the photocatalytic reaction system can be an alternative as a post-treatment to treat the secondary effluent from municipal sewage.

• 한국재료학회지
• /
• 제29권12호
• /
• pp.747-752
• /
• 2019

Environmental pollution remains a considerable health risk source all over the world; however, hazards are usually higher in developing countries. Iraq has long been suffering from the problem of pollution and how to treat pollution. Photocatalytic degradation has turned out to be most productive process for dye degradation. In this investigation, Rhodamine B (RhB), dye has been selected for degradation under visible light illumination. To address this issue, we fabricate erbium trioxide nanoparticles (Er₂O₃/NPs). Erbium trioxide nanoparticles are prepared and utilized for photo-catalytic degradation. The characterization of Er₂O₃/NPs is described and confirmed by utilizing of XRD (X-ray diffraction) and SEM (Scanning Electron Microscopy). The average size of Er₂O₃ nanoparticles is observed to be 16.00 nm. Er₂O₃/NPs is investigated for its ability of photo-catalytic degradation through certain selected parameters such as concentration and time. The methodological results show that the synthesized Er₂O₃/NPs is a good photo-catalytic for Rhodamine degradation.