• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.124-128
• /
• 2005

This studies were carried out to investigate optimal conditions for Lactic acid bacteria growth, which was grown in a batch fermenter. The optimal temperature was $30^{\circ}C$, optimal pH was 6.5 and agitation speed was 100rpm and didn't supply the air. Used media compositions were yeast extract 5g/L, peptone 10g/L, sugar 20g/L, beef extract 10g/L, tween 80 1ml/L, ammonium citrate 2g/L, sodium acetate 5g/L, magnesium sulfate 0.1g/L, manganese sulfate 0.05g/L, dipotassium phosphate 2g/L. These results would be useful for enhancing lactic acid bacteria concentration.

• Korean Journal of Materials Research
• /
• v.6 no.12
• /
• pp.1170-1178
• /
• 1996

저용융점을 가진 새로운 무기 접착제인 단사정 HBO2가 알루미나 분말의 선택적 레이저 소결을 하기 위한 접착제로서 개발되었다. 이것을 이용하여 만들어진 green body는 현재까지 알루미나 분말의 선택적 레이저 소결을 위하여 개발된 다른 무기 접착제들인 알루미늄(Ai)과 Ammonium Phosphate(NH4H2PO4)을 이용하여 제조된 것에 비교하여 훨씬 높은 굽힘 강도를 가지고 있고 또 정밀도가 우수하였다. Green Body는 후속의 열처리를 받음으로써 저밀도 단상 세라믹 AI18B4O33과 다상 세라믹 복합재료 AI2O3-AI4B2O9으로 된다. AI18B4O33과 AI4B2O9의 결정립의 모양은 휘스커 구조와 유사하였다. 재료인자와 가공변수가 이 세라믹의 기계적 및 물리적 성질에 미치는 영향이 조사되었다.

• Korean Journal of Materials Research
• /
• v.8 no.8
• /
• pp.714-719
• /
• 1998

저용융점을 가진 새로운 무기접착제인 단사정 HBO2가 알루미나 분말의 선택적 레이저 소결을 하기 위한 접착제로서 개발되었다. 12$0^{\circ}C$로 유지된 진공오븐 안에서 Boron Oxide 분말을 탄수시키면 단사정 HBO2가 만들어진다. 이것을 이용하여 만들어진 green body는 현재까지 알루미나 분말의 선택적 레이저 소결을 위하여 개발된 다른 무기 접착제들인 알루미늄(AI)과 Ammonium Phosphate(NH4H2PO4)을 이용하여 제조된 것에 비교하여 훨씬 높은 굽힘 강도를 가지고 있고 또 정밀도가 우수하였다. Green body를 열처리하여서 얻은 세라믹 시편도 똑같은 결과를 보여주었다. 이 이유는 단사정 HBO2가 낮은 점도를 보여주고 알루미나 분말에 대하여 좋은 젖음성을 가지고 있기 때문에 가능한 것으로 사료되어진다. 접착제로서 Boron Oxide의 양, 레이저 에너지밀도 등이 SLS에 의하여 제조되어진 복합재료의 굽힘강도에 미치는 영향이 조사되었다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.5
• /
• pp.457-464
• /
• 2001

Algal growth potential (AGP) assay using Cochlodinium polykrikoides was conducted in Saryang Island coast where C. polykrikoides red tide occurred annually from July to October 1998. The effects of macro- and micro-nutrients on the growth of C. polykrikoides were specifically evaluated by the algal assay method. Two different types of growth response of C. polykikoides for the addition of nutrients were clearly obseued. For both before and after C. polykrikoides occurrence, the growth of C. polykikoides was significantly stimulated by the addition of either nitrate or ammonium of $50{\mu]M$ with phosphate of $5{\mu}M$. The addition of a single nutrient had no clear effect on the growth of C. polyhikoides and the addition of trace metals, vitamins, and EDTA etc. did not stimulate the algal growth, also. This result indicates that both N and P potentially limited the growth of C. polyhikoides in this period. However, during a bloom of C. polyhikoides, the growth was unlikely to be stimulated by the addition of both macro- and micro-nutrients. At that time the nutrient concentration of Saryang Island coast was $24.33{\mu}M$ for ammonium, $1.61{\mu}M$ for phosphate, and $0.58{\mu}M$ for nitrate, respectively. The concentrations of nutrients increased, on average, 8.2-fold for ammonium and 4.8-fold for phosphate, decreased 3.3-fold for nitrate compared to both before and after the red tide. This result shows that the growth of C. polykikoides was not limited by the nutrients during the bloom in September. Therefore, our results suggest that the C. polykrikoides red tide may outbreak especially when the water is fertilized due to the increased N and P.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.4
• /
• pp.3-57
• /
• 1985

This research was conducted to examine the feasibility of developing fire retardant particleboard and complyboard. Particleboard were manufactured using meranti particle(Shorea spp.)made with Pallmann chipper, and complyboard meranti particle and apitong veneer (Dipterocarpus spp.). Particles were passed through 4mm (6 mesh) and retained on 1mm (25 mesh). Urea formaldehyde resin was added 10 percent on ovendry weight of particle. Face veneer for complyboard was 0.9, 1.6 and 2.3mm in thickness and spread with 36 g/(30.48 cm)$^2$ glue on one side. Veneers were soaked with 10 percent solution of five fire retardant chemicals (diammonium phosphate, ammonium sulfate, monoammonium phosphate, Pyresote and Minalith), and particles with 5, 10, 15 and 20 percent solution of five chemicals. Particleboard and complyboard were evaluated on physical and mechanical properties, and fire retardancy. The results obtained were summarized as follows. 1. Among five fire retardant chemicals treated to particleboard and complyboard, the retention of ammonium sulfate in 5 percent solution showed the lowest as 1.39 kg/(30.48 cm)$^3$ exceeding the minimum retention of 1.125 kg/(30.48 cm)$^3$ recommended by Forest Products Laboratory and Koch. 2. Particleboard and complyboard treated with diammonium phosphate showed higher modulus of rupture (MOR), modulus of elasticity (MOE), internal bond strength and screw holding power than those with the other chemicals. 3. MOR and MOE of complyboard treated with fire retardant chemicals were greater than those of fire retardant particleboard. 4. Thickness swelling of fire retardant complyboard was lower than that of fire retardant particleboard. 5. The moisture content of the boards treated with Pyresote and Minalith increased and with monoammonium phosphate reduced. 6. Fire retardant particleboard showed no ignition, and fire retardant complyboard started ignition, but time required to ignite was prolonged comparing the controlboard. Complyboard with only shell veneer treated showed ignition and lingering flame, but lingering flame time was shorter than controlboard. Complyboard with treated both core and veneer showed ignition but not lingering flame. 7. Flame length, carbonized area and weight loss were smaller than controlboard but had no significant difference among chemicals treated. 8. Temperature of unexposed surface of fire retardant particleboard was lowered with the increasing concentration of five chemicals. 9. Temperature of unexposed surface of fire retardant particleboard was lowered with the highest in Pyresote and the lowest in Minalith. 10. Temperature of unexposed surface of fire retardant complyboard was lower than that of controlboard.

• Ocean and Polar Research
• /
• v.33 no.4
• /
• pp.435-445
• /
• 2011

We investigated geochemical properties, and microbial sulfate- and iron(III) reduction in sediment influenced by the aquaculture of abalone in the Nohwa-do, southern coastal sea in Korea. Concentrations of ammonium, phosphate, and sulfide in the pore-water were higher at farm sites than at control sites. The differences between the 2 types of sites were most apparent in terms of the weights of abalone and the temperature increase during September. Accordingly, the rates of sulfate reduction at the farm sites during September (61 mmol S $m^{-2}d{-1}$) were 3-fold higher than the sulfate reduction during May (20 mmol S $m^{-2}d{-1}$). In contrast, Fe(III) reduction rates were highest at the control sites in May, but its significance was relatively decreased at farm sites during September when sulfate reduction rates were highest. During September, benthic ammonium flux was 3-fold greater at the farm sites (35 mmol N $m^{-2}d{-1}$) than at the control sites (12 mmol N $m^{-2}d{-1}$), and phosphate flux was 8-fold higher at the farm sites (0.018 mmol P $m^{-2}d{-1}$) than at control sites (0.003 mmol P $m^{-2}d{-1}$). Overall results indicated that the inappropriate operation of a large-scale aquaculture farm may result in excess input of biodeposits and high nutrient fluxes from the sediment, thereby decreasing diversity of the benthic ecosystem and deepening eutrophication in coastal waters.

• 한국해양학회지
• /
• v.28 no.3
• /
• pp.229-240
• /
• 1993

This study investigated the behaviour of sulfur species after the early diegenetic reduction of sulfate from pore solution in an anoxic intertidal flat deposit in the Banweol area of Kyeong-gi Bay, west coast of Korea. A total of seven sediment cores were collected during 1990∼1992 and were analyzed for their solid-phase sulfur species (acid-volatile sulfur, element sulfur, pyrite sulfur) as well as for chemical components in the pore solution, such as sulfate, ammonium, hydrogen sulfide, phosphate and Fe ion. The pore water sulfate oncentration was found to decrease rapidly downward from the sediment surface, while that of hydrogen sulfide, ammonium and phosphate showed and increase. The dissolved iron concentration in pore water, on the other hand, was found high in the surface layer of sediment, but fell sharply below this layer. these characteristic profiles of pore water sulfide and iron concentrations suggest that some reaction occurs between dissolved iron and sulfide ions, leading to the formation of various sulfide minerals in the sedimentary phase. The amount of inorganic sulfur species in the sediment increased downward, and showed a maximum of up to 7.9 mg/g. among the three species analyzed, acid-volatile sulfur (AVS) was dominant comprising more than 50% of the total. The amount of pyrite sulfur was greater than that of element sulfur. This implies that the formation of pyrite was restricted in this environment. the limited amount of element sulfur in this deposit may have discouraged the active formation of pyrite.

• Korean Journal of Food Science and Technology
• /
• v.28 no.2
• /
• pp.279-284
• /
• 1996

To develop a selective medium for the isolation and the detection of leuconostocs from the various samples including fermented vegetables, ten strains of leuconostocs and seven strains of lactobacilli were tested for their sensitivity to various antibiotics. The basal-medium containing 5 ${\mu}g/ml$ of novobiocin inhibited the growth of lactobacilli completely, but not that of leuconostocs. On the basis of this result, a new selective medium was developed and to be named NLS medium. This medium contains 1% Tryptone (Difco), 0.1% Yeast Extract (Difco), 2% sucrose, 0.1% Beef Extract (BBL), 0.5% sodium acetate, 0.2% ammonium sulfate, 0.01% magnesium sulfate, 0.2% dipotassium phosphate, 0.05% sorbic acid, 75 ppm sodium azide (Sigma), 0.1% (vol/vol) Tween 80, 30 ${\mu}g/ml$ of Vancomycin (Sigma), 5${\mu}g/ml$ of Novobiocin (Sigma), 0.5${\mu}g/ml$ of cysteine HCI, and 1.5% Agar (Difco). All of the eighty six isolates obtained from some foodstuffs were identified as members of the genus Leuconostoc. Comparative counts with the MRS, PES, LUSM, and NLS medium indicated that the recovery percent was lower than other selective media. Therefore, this result suggested that NLS medium was suitable for the isolation of leuconostocs, but not for counting or enumerating.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.16 no.4
• /
• pp.251-261
• /
• 1987

This study was attempted to increase the production of L-Threonine by Brevibacterium Flavum ATCC 14067, To select the strain which produce the highest threonine, mutants ere induced by N-methyl-N'-nitro-N-nitrosoguanidine treatment. The composition of media and cultural condition for its overproduction of threonine were also studied. In a threonine producer, strain B-13(Met-) was the strain producing the highest amount of threonige among methionine, lysine and isoleucine auxotrophs. The following results were obtained. 1. The wild strain and B-13(Met-) produced threonine 1.4mg/ml and 4.86mg/ml , respectively. 2. The optimum composition of medium for producing threonine by Brevibacterium Flavum B-13 was glucose 10%, ammonium sulfate 4%, potassium phosphate monobasic 0.2%, magnesium sulfate 0.05%, biotin $200{\mu}l$, thiamine $300{\mu}l$. Addition of nicotinic acid also led to increase L-threonine production. 3. In addition of organic nutrients to the fermentation medium, peptone n'ere effective and addition of methionine $100{\mu}g/ml$ produced the highest amount of L-Threonine. Aspartic acid and homoserine were also effective when these amino acid were added to the fermentstion medium. 4. Cultural conditon on threonine production by B-16 were investigated. The optimum pH was 7.0-8.0. The highest amount of threnine was produced after 4 days of cultural period.

• Korean Journal of Microbiology
• /
• v.41 no.3
• /
• pp.164-167
• /
• 2005

The culture condition and medium composition for the enhanced mycelial growth of Lepista nuda DGUM 26501 were investigated. The optimal temperature and pH for the mycelial growth were $24^{\circ}C$ and $7.0\~8.0$, respectively. The partial pressure of oxygen for the enhanced mycelial growth was more than $10\%\;O_2$. When Czapek-Dox medium was used as a minimal medium, manitol and xylitol were very good carbon sources. Organic nitrogen sources were better than inorganic ones for mycelial growth. As the nitrogen source tested, com steep liquor, soytone and protease peptone were the best as a source of organic nitrogen sources. When ammonium phosphate as phosphorus sources was used, the enhanced mycelial growth was shown. Nicotinic acid was proved to be the most appropriate source of vitamin. After the mycelia of L. nuda DGUM 26501 was cultivated at $24^{\circ}C$ for 10 days in LNM broth (pH 7.0), the activities of extracellular enzyme were determined. The specific activity of $\alpha-amylase$ was much higher than those of other enzymes. However, little or no enzyme activities of $\beta-glucosidase$, CMCase, laccase and lipase were found.