• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3413-3416
• /
• 2012

Phenol-free resin was synthesized and its printing ink properties were investigated. The phenol-free resin was produced by esterification of poly phthalate and Diels-Alder adduct of rosin anhydride. Compared to rosin modified phenolic resin, eco-friendly phenol-free resin showed better vehicle properties in terms of gloss, yellowing, runability, and storage stability. The results suggest the utility of phenol-free resin instead of conventional rosin modified phenolic resin.

• KSBB Journal
• /
• 제11권5호
• /
• pp.577-585
• /
• 1996

본 연구에서는 페놀 분해 능력이 있는 활성슬러지 를 광경화성 수지에 포괄 고정화하여 페놀 분해에 미치는 영향인자에 대하여 조사 검토하였다. 고정화 활성슬러지의 경우 free 활성슬러지 보다 넓은 pH 범위에서 페놀 분해 상대활성도가 높게 나 타났￡며, 고정화비드 직경이 작을수록 페놀분해 시 간이 짧았다. 페놀농도 2000 mg/L까지는 free 활 성슬러지의 분해시간이 짧았으나, 3000 mg/L에서 는 고정화 활성슬러지의 분해능이 높았다. 고정화비 드 주입량에 따른 페놀 분해성은 반융기 내에 주입 된 고정화비드양에 정비례 하지는 않았으나 주입량 이 많을수록 페놀 처리율이 높았다. 고정화 활성슬 러지의 반융에서는 반복샤용 7회 이상일 때의 상대 활성도는 처음의 약 8배 정도 증가하였다. 고정화 활성슬러지를 합성폐수 또는 증류수에서 진탕 또는 정지상태로 20일간 보관한 후에는 700 mg/L의 페놀이 24시간 후면 거의 분해되었으며, 증 류수에 정지된 상태로, 40일간 보관한 후에는 마찬가지로 24시간 후에 96.7 % 이상이 분해되었다. 또 한 고정화 활성슬러지를 합성폐수에서 호기적으로 보존하면 80일간 보존이 가능하였다. 고정화 활성슬러지를 사용한 연속처리에서는 용적 부하 5.59 kg-phenol/m3.d에서 95 % 이상의 페놀 이 제거되었으며, 연속실험에서 페놀제거 효율이 95 % 이상일 때 처리성척을 비교해보면, 고정화 활성 슬러지 빛 free 활성슬러지 용척부하는 각각 7.46, 3 3.72 kg-phenol/m3.day로써 고정화 활성슬러지가 2배 더 높은 부하에서 처리가 가능하였다.

• 펄프종이기술
• /
• 제44권2호
• /
• pp.42-48
• /
• 2012

In the 21st century, the printing industry as well as the IT industry has made rapid development. However, despite these technological advancement in the printing industry, it is still harmful for the environment, the state regulation is insufficient. Therefore, we studied the printability for the existing heat-set web inks and the newly created phenol-free eco-inks. This ink was made by reacting rosin and unsaturated dibasic acid and ester reactant, ester reactant was used instead of phenol. Printability test were used in the IGT printability tester. Experimental conditions, the temperature $22.7^{\circ}C$, humidity 57% under conditions of 0.6cc of ink supply, the print speed 1m/sec, pressures were set at 250N. As results of this study, we were able to get the following conclusions. The properties of phenol-free ink is the same as the existing inks. So we are thought to improve some characteristics such as dispersion, able to replace the existing ink.

• 펄프종이기술
• /
• 제44권3호
• /
• pp.41-48
• /
• 2012

Materials used for the inks in the printing industry is an important material following the paper. The composition of the ink is pigment and organic solvents. However, Ink is used in a variety of chemicals, they are classified as non-green. Therefore, rosin-modified phenolics manufactured by the reaction of phenol and formaldehyde can take the place of eco-phenol free resin and by experiment density, gloss, trapping, contrast and dot gain of printing has been studied as printability. The result of study can support that the properties of printing using eco-phenol free resin such as density, gloss, contrast and trapping is similar to existing ink. In the part of dot gain, the result is excellent. So we were thought to be able to improve some characteristics such as dispersion of black ink, that will be possible for the field applicability.

• 한국물환경학회지
• /
• 제24권1호
• /
• pp.118-122
• /
• 2008

Degradations of phenol and chlorinated compounds mixtures were studied with ultrasound of 20 kHz and 0.57, 1.14 W/mL. In presence of carbon tetrachloride (CT), degradation rate of phenol is faster than chloroform (CF), dichloromethane (DCM) and phenol solution. It is due to that CT generates of free chlorine (HOCl and $OCl^-$) from the sonochemical degradation and plays a role of hydrogen atom scavenger. CF and DCM are react with free chlorine, so amount of free chlorine is smaller than CT solution. The degradation rates of chlorinated compounds decreased with co-presence of phenol in the solution due to the distribution ultrasonic energy to both compounds. The measured chloride ion was lower than the theoretical concentration assuming complete degradation. This means not all the contaminants destructed went through complete degradation.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2002년도 생물공학의 동향 (X)
• /
• pp.431-434
• /
• 2002

단일균이나 활성슬러지를 이용하여 폐수를 처리하고자 할 때 폐수의 pH 가 단일균이나 활성 슬러지의 최적 pH 에 적합하지 아니한 경우에는 미생물을 고정화하여 희망하는 pH에서 최대의 분해활성을 나타내도록 최적 pH를 어느정도 변화시킬 수 있으며, 기존의 활성슬러지법 보다는 활성 슬러지를 고정화하여 처리하는 것이 높은 부하에서도 제거 효율이 높기 때문에 반응조의 콤펙트화가 가능할 것으로 사료된다.

• 펄프종이기술
• /
• 제44권4호
• /
• pp.77-84
• /
• 2012

The lithographic process depends on a satisfactory ink-in-water emulsion being formed during printing and the speed of wet presses makes the choice of fountain solution vitally important as the ink and fount must react quickly to form a stable emulsion. Ink and water come into contact with each other on the rolls of the press and are forced together in the roll nips. The water is not soluble in the ink since it is slightly fat. Instead, an emulsion is formed, a heterogeneous mass consisting of small water drops mixed into the ink, if the water feed is too great. This emulsification can affect the properties of an off-set ink and negatively affect the printability. So we investigated the effects of the emulsification of phenol free heat-set ink and existing heat-set ink on printed quality, such as amount of ink transfer, printed density, print-through and uniformity. We used Duke emulsification tester for the emulsification of inks, and used IGT printability tester for printed quality. The printed quality were measured by densitometer and were evaluated by the image analysis system. Compared to conventional printing ink, phenol-free ink showed better results of the printability at the emulsification.

• Journal of Microbiology and Biotechnology
• /
• 제16권7호
• /
• pp.1068-1077
• /
• 2006

Pseudomonas sp. PhCN strain, which has the potential to utilize phenol and cyanide as a sole carbon and nitrogen source, was isolated. A comparison of the effect of cyanide on phenol degradation and vice versa by strain PhCN showed that the degradation time was significantly delayed by an increase in either phenol or cyanide concentration, and the greatest activities were obtained in basal medium containing a low concentration of cyanide and phenol. This strain contained two plasmids of approximately 120 kb (pPhCN-1) and 110 kb (pPhCN-2). Plasmid curing experiments produced a plasmid-free strain as well as strains containing either the 120- or the 110 kb plasmid. The strains were tested for their ability to utilize phenol and KCN. The results demonstrated that the ability to utilize phenol was encoded by the 120 kb plasmid, whereas the ability to utilize cyanide appeared to be encoded by the chromosome.

• 한국식품저장유통학회지
• /
• 제11권4호
• /
• pp.455-460
• /
• 2004

본 연구는 추출용매 및 주정에 의한 탈지 및 비탈지 포도종자 추출물의 수율, 항산화활성 및 총페놀함량을 분석하였으며, 각종 pH에서 처리된 추출물의 저장시 항산화력 변화를 살펴보았다. 추출수율은 탈지 및 비탈지 처리한 포도종자 분말 모두 $70\%$ 에탄올로 $70^{\circ}C$에서 6시간 추출하였을 때 각각 $8.9\%,\;9.16\%$로 다른 유기용매에 비하여 가장 높은 것으로 나타났으며, methanol, acetone-acetic acid 및 acetone 순으로 나타났으며 $70\%$ ethanol 탈지추출물의 항산화활성이 $41.52\;{\mu}g$으로 나타나 다른 용매의 추출물보다 훨씬 높았다. 포도종자 추출물은 탈지 및 비탈지추출물 모두 주정농도는 $90\%$, 추출온도는 $70^{\circ}C$, 추출시간은 6시간에서 가장 항산화활성이 좋았으며 $70^{\circ}C$에서 추출시간이 길어질수록 열에 의한 변성으로 인하여 항산화활성이 오히려 감소하였다. 이러한 결과는 같은 조건하에서 각 추출물의 total phenol 함량을 측정한 결과와 유사한 것으로 나타났다. 탈지 및 비탈지 추출물의 경우, ethylacetate 분획층이 $RC_{50}$값이 14.78, $12.35{\mu}g/mL$로 항산화활성이 가장 컸으며, buthanol, water, chloroform, hexane 분획층로 나타났다. 한편, 탈지 및 비탈지 포도종자 추출물을 pH 2, 7, 10의 표준 buffer 용액에 녹인 후 $50^{\circ}C$에서 1달간 저장하여 항산화력을 측정한 결과, 산성 조건보다는 알칼리성조건에서 더욱 항산화활성이 감소하였으며 건조상태로 저장시 고온에 매우 안정한 것으로 나타났다.

• 한국환경과학회지
• /
• 제25권7호
• /
• pp.905-916
• /
• 2016

The characteristics of phenol removal and $UV_{254}$ matters variance were investigated and compared by the variation of operating factors (NaCl concentration, air flow rate, initial phenol concentration) in electrochemical reaction (ER) and dielectric barrier discharge plasma reaction (DBDPR), respectively. The phenol removal rate was shown as $1^{st}$ order both in ER and DBDPR. Also, the absorbance of $UV_{254}$ matters which means aromatic intermediates was analyzed to investigate the complete phenol degradation process. In ER, the phenol degradation and aromatic intermediates production rates increased by the increase of NaCl concentration. However, in DBDPR, the variation of NaCl concentration had no effect on the degradation of phenol and $UV_{254}$ matters. Air flow rate had a little effect on the removal of phenol and the variation of $UV_{254}$ matters in ER. The phenol removal rate in ER was a little higher than that in DBDPR. The produced $H_2O_2$ and $O_3$ amounts in ER were 2 times and 10 times higher than those in DBDPR. The chlorine intermediates ($ClO_2$ and free chlorine) were produced in ER, however, they were not produced in DBDPR.