• Bulletin of the Korean Chemical Society
• /
• v.33 no.10
• /
• pp.3413-3416
• /
• 2012

Phenol-free resin was synthesized and its printing ink properties were investigated. The phenol-free resin was produced by esterification of poly phthalate and Diels-Alder adduct of rosin anhydride. Compared to rosin modified phenolic resin, eco-friendly phenol-free resin showed better vehicle properties in terms of gloss, yellowing, runability, and storage stability. The results suggest the utility of phenol-free resin instead of conventional rosin modified phenolic resin.

• KSBB Journal
• /
• v.11 no.5
• /
• pp.577-585
• /
• 1996

Effects of various factors on the phenol degradation by activated sludge immobilized with the photo-crosslinked resin were investigated. The optimum pH on the degradation of phenol in both free and immobilized activated sludge was 7. When the pH of the reaction was varied from 5 to 10, the relative activity of the phenol degradation by the immobilized activated sludge was higher than that by the free activated sludge. A higher rate of phenol degradation was observed when a bead size was smaller. The phenol degradation in the free activated sludge was inhibited at the 3000 mg/L of phenol, while that in the immobilized activated sludge was maintained at the same concentration for 28 hrs without an inhibition. The degradation rates of phenol were not directly proportional to the increasing amount of immobilized beads dosage, but the phenol degradation was made in a rather short time than that for a free sludge system. The relative activities of the immobilized activated sludge after 7 runs of repeated reactions increased about 8 times as that of the first reaction. The activities for the phenol degradation remained stable for at least 80 days when the immobilized activated sludge was stored at an aerobic condition in the wastewater containing phenol. The loading rate as high as 5.59 kg-pheno1/㎥.d could have been achieved during the continuous treatment of phenol by the immobilized activated sludge.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.2
• /
• pp.42-48
• /
• 2012

In the 21st century, the printing industry as well as the IT industry has made rapid development. However, despite these technological advancement in the printing industry, it is still harmful for the environment, the state regulation is insufficient. Therefore, we studied the printability for the existing heat-set web inks and the newly created phenol-free eco-inks. This ink was made by reacting rosin and unsaturated dibasic acid and ester reactant, ester reactant was used instead of phenol. Printability test were used in the IGT printability tester. Experimental conditions, the temperature $22.7^{\circ}C$, humidity 57% under conditions of 0.6cc of ink supply, the print speed 1m/sec, pressures were set at 250N. As results of this study, we were able to get the following conclusions. The properties of phenol-free ink is the same as the existing inks. So we are thought to improve some characteristics such as dispersion, able to replace the existing ink.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.3
• /
• pp.41-48
• /
• 2012

Materials used for the inks in the printing industry is an important material following the paper. The composition of the ink is pigment and organic solvents. However, Ink is used in a variety of chemicals, they are classified as non-green. Therefore, rosin-modified phenolics manufactured by the reaction of phenol and formaldehyde can take the place of eco-phenol free resin and by experiment density, gloss, trapping, contrast and dot gain of printing has been studied as printability. The result of study can support that the properties of printing using eco-phenol free resin such as density, gloss, contrast and trapping is similar to existing ink. In the part of dot gain, the result is excellent. So we were thought to be able to improve some characteristics such as dispersion of black ink, that will be possible for the field applicability.

• Journal of Korean Society on Water Environment
• /
• v.24 no.1
• /
• pp.118-122
• /
• 2008

Degradations of phenol and chlorinated compounds mixtures were studied with ultrasound of 20 kHz and 0.57, 1.14 W/mL. In presence of carbon tetrachloride (CT), degradation rate of phenol is faster than chloroform (CF), dichloromethane (DCM) and phenol solution. It is due to that CT generates of free chlorine (HOCl and $OCl^-$) from the sonochemical degradation and plays a role of hydrogen atom scavenger. CF and DCM are react with free chlorine, so amount of free chlorine is smaller than CT solution. The degradation rates of chlorinated compounds decreased with co-presence of phenol in the solution due to the distribution ultrasonic energy to both compounds. The measured chloride ion was lower than the theoretical concentration assuming complete degradation. This means not all the contaminants destructed went through complete degradation.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.431-434
• /
• 2002

Effect of various factors on the phenol degradation by activated sludge immobilized with the photocrosslinked resin were investigated. The optimum pH on the degradation of phenol in both free and immobilized activated sludge was 7. A higher rate of phenol degradation was observed when a bead size, vas smaller. The phenol degradation in the free activated sludge was inhibited at the 3000 mg/L of phenol, while that in the immobilized activated sludge was maintained at the same concentration for 28 hrs without an inhibition.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.4
• /
• pp.77-84
• /
• 2012

The lithographic process depends on a satisfactory ink-in-water emulsion being formed during printing and the speed of wet presses makes the choice of fountain solution vitally important as the ink and fount must react quickly to form a stable emulsion. Ink and water come into contact with each other on the rolls of the press and are forced together in the roll nips. The water is not soluble in the ink since it is slightly fat. Instead, an emulsion is formed, a heterogeneous mass consisting of small water drops mixed into the ink, if the water feed is too great. This emulsification can affect the properties of an off-set ink and negatively affect the printability. So we investigated the effects of the emulsification of phenol free heat-set ink and existing heat-set ink on printed quality, such as amount of ink transfer, printed density, print-through and uniformity. We used Duke emulsification tester for the emulsification of inks, and used IGT printability tester for printed quality. The printed quality were measured by densitometer and were evaluated by the image analysis system. Compared to conventional printing ink, phenol-free ink showed better results of the printability at the emulsification.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.7
• /
• pp.1068-1077
• /
• 2006

Pseudomonas sp. PhCN strain, which has the potential to utilize phenol and cyanide as a sole carbon and nitrogen source, was isolated. A comparison of the effect of cyanide on phenol degradation and vice versa by strain PhCN showed that the degradation time was significantly delayed by an increase in either phenol or cyanide concentration, and the greatest activities were obtained in basal medium containing a low concentration of cyanide and phenol. This strain contained two plasmids of approximately 120 kb (pPhCN-1) and 110 kb (pPhCN-2). Plasmid curing experiments produced a plasmid-free strain as well as strains containing either the 120- or the 110 kb plasmid. The strains were tested for their ability to utilize phenol and KCN. The results demonstrated that the ability to utilize phenol was encoded by the 120 kb plasmid, whereas the ability to utilize cyanide appeared to be encoded by the chromosome.

• Food Science and Preservation
• /
• v.11 no.4
• /
• pp.455-460
• /
• 2004

This study was conducted to determine the yield, free radical scavengering effect and total phenol contents of various solvent fractions on the crude and defatted grape seed extract during storage. The optimal condition for the extraction yield, free radical scavengering effect and total phenol contents was $90\%$ ethanol for 6 hour at $70^{\circ}C$. The extraction yield for crude and defatted grape seed at optimal condition was $8.9\%\;and\;9.16\%$, respectively. Also, the strongest free radical scavengering effect with $41.52\;{\mu}g/mL$ was observed in $95\%$ ethanol of defatted grape seed extracted for 6 hour at $70^{\circ}C$. Similar result was observed in total phenol contents of defatted grape seed. The ethyl acetate fraction obtained from ethanol extract of defatted grape seed showed the strongest RC50($12.35\;{\mu}g/mL$) compared to other organic fractions. Free radical scavengering effect of crude and defatted grape seed extracts treated with alkali condition(pH 10) was reduced compared to that of acidic condition(pH 2) during storage far 1 month at $50^{\circ}C$. Overall, more stronger free radical scavengering effect and higher total phenol contents in defatted grape seed extracts was observed than that of crude grape seed.

• Journal of Environmental Science International
• /
• v.25 no.7
• /
• pp.905-916
• /
• 2016

The characteristics of phenol removal and $UV_{254}$ matters variance were investigated and compared by the variation of operating factors (NaCl concentration, air flow rate, initial phenol concentration) in electrochemical reaction (ER) and dielectric barrier discharge plasma reaction (DBDPR), respectively. The phenol removal rate was shown as $1^{st}$ order both in ER and DBDPR. Also, the absorbance of $UV_{254}$ matters which means aromatic intermediates was analyzed to investigate the complete phenol degradation process. In ER, the phenol degradation and aromatic intermediates production rates increased by the increase of NaCl concentration. However, in DBDPR, the variation of NaCl concentration had no effect on the degradation of phenol and $UV_{254}$ matters. Air flow rate had a little effect on the removal of phenol and the variation of $UV_{254}$ matters in ER. The phenol removal rate in ER was a little higher than that in DBDPR. The produced $H_2O_2$ and $O_3$ amounts in ER were 2 times and 10 times higher than those in DBDPR. The chlorine intermediates ($ClO_2$ and free chlorine) were produced in ER, however, they were not produced in DBDPR.