• Journal of the Korean Chemical Society
• /
• v.37 no.7
• /
• pp.655-661
• /
• 1993

The neutral monomeric compounds $[Mo(NO)_2Cl_2(phen)]$ and $[W(NO)_2Cl_2(phen)]$ (phen= 1,10-phenanthroline) have been prepared by reactions of polymeric compounds $[{Mo(NO)_2Cl_2}n],\;[{W(NO)_2Cl_2}n]$ with chelate ligands. Additions of one equivalent of silver(I) perchlorate to these cis-dinitrosyl compounds in acetone solution produce $[Mo(NO)_2(phen)(S)Cl][ClO_4]\;and\;[W(NO)_2(phen)(S)Cl][ClO_4]$ (S = acetone). The homo- and hetero-dinuclear complexes, $[Cl(phen)(NO)_2M(pyz)M'(NO)_2(phen)Cl][ClO_4]_2$ (M = Mo, W) and $[Cl(phen)(NO)_2M(pyz)M'(NO)_2(phen)Cl][C1O_4]_2$ (M = Mo, M' = W) have been prepared by these monocationic complexes with pyrazine ligand respectively. These complexes characterized by elemental analysis, $1^H-\;and\;^{13}C-NMR$, infrared, and UV-visible spectroscopy are reported. The spectral data indicate that homo- and hetero-dinuclear complexes were symmetrical structures of $C_{2v}$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1280-1283
• /
• 2005

A novel zinc complex, Zn(phen)q, was synthesized from 1,10-phenanthroline (phen) and 8-hydroxyquinoline (q) as organic ligands and its electroluminescent (EL) properties were characterized. The structure of Zn(phen)q was elucidated by FT-IR, UV-Vis and XPS. The complex Zn(phen)q showed thermal stability up to $300^{\circ}C$ under nitrogen flow, which was measured by TGA and DSC. The photoluminescence (PL) of the Zn(phen)q was measured from the THF solution and the solid film on quartz substrate. The PL emission of Zn(phen)q exhibited green light centered at about 505nm. The EL devices were fabricated by the vacuum deposition. The EL devices having the structure of ITO/a-NPD/Zn(phen)q/Li:Al were studied, where 4,4'-bis[N-(1-naphthyl)-N-phenylamino]biphenyl(a-NPD) used as a hole transport layer(HTL). a-NPD has high Tg of $96^{\circ}C$ and thus makes the device thermally stable. The EL emission of Zn(phen)q exhibited also green light centered at 532nm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.313-314
• /
• 2005

Organic light emitting diodes(OLEDs) are widely used as one of the information display techniques. We synthesized (1,10-phenanthroline)- (8-hydroxyquinoline) [Zn(Phen)q]. We studied the improvement of OLEDs properties using Zn(phen)q. The Ionization Potential(IP) and the Electron Affinity(EA) of Zn(phen)q investigated using cyclic voltammetry(CV). The IP, EA and Eg were 7.leV, 3.4eV and 3.7eV, respectively. The PL spectrum of Zn(phen)q was yellowish green as the wavelength of 535nm. In this study, we used Zn(phen)q as electron transporting layer(ETL) inserted between emitting layer(EML) and cathode. As a result, Zn(phen)q is useful as electron transporting layer to enhance the performance of OLEDs.

• Journal of the Korean Chemical Society
• /
• v.23 no.2
• /
• pp.75-79
• /
• 1979

The frontier orbital energy, superdelocalizability and charge density of a series of benzologous pyridine ligands have been calculated by using HMO. According to ${\Delta}E_{\pi}$ of ligands on the basis of the above results, it is concluded that the stabilities are in the order of 1,10-Phen > 4,5-Phen > 1,5-Phen > 8-Hox > Hox-azoquinolinato. And also, the reactivities of electrophilic, nucleophilic and radical reaction, and bond strength have been respectively studied by superdelocalizabilities and charge densities.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.3
• /
• pp.399-403
• /
• 2002

The complex of iron(II) tris(3-Br-phen) (3-Br-phen; 3-bromo-1,10-phenanthroline) was prepared as a precursor of electropolymerization and the crystal structure of [Fe(3-Br-phen)3]($PF_6$)2${\cdot}$CH3CN with a distorted octahedral geometry has been investigated. The reductive electropolymerization of $>[Fe(3-Br-phen)3]^{2+}$ complex onto the surface of a glassy carbon electrode and indium tin oxide (ITO) optically transparent electrode were performed in acetonitrile at room temperature. Thin film of poly-$>[Fe(3-Br-phen)3]^{2+}$ formed was adherent, electroactive and stably deposited on a glassy carbon disk electrode. The thin metallopolymeric film formed was also confirmed by absorption spectroscopy.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.10
• /
• pp.1655-1658
• /
• 2006

The solution of $[Ru(phen)_2(dppz)]^{2+}$ and SDS has high Resonance Light Scattering (RLS) signals due to $[Ru(phen)_2(dppz)]^{2+}$ assemble on the surface of the SDS micelle. Because of the high affinity ($KB\geq10^6\;L\;mol^{-1}$) between $[Ru(phen)_2(dppz)]^{2+}$ and DNA, the adding of DNA in the solution of $[Ru(phen)_2(dppz)]^{2+}$-SDS makes the dissociation of $[Ru(phen)_2(dppz)]^{2+}$-SDS, and results in decreasing of the RLS signals and increasing of the absorbance. Based on this, a novel method is proposed for DNA assay. Under optimum condition, good linear relationship was obtained within the concentration range of 0.018-1.26 $\mu g\;mL^{-1}$, the linear equation is $I_{RLS}$ = 504.8-348.8 c (c: $\mu g\;mL^{-1}$) and the correlation coefficient (r) is 0.9992. The detect limit for calf thymus DNA is 8.6 ng $mL^{-1}$. The proposed method was successful applied to determine the extracted colibacillus plasmid DNA.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.10
• /
• pp.871-877
• /
• 1998

Electroluminescent(EL) devices based on organic materials have been of great interest due to their possible applications for large-area flat-panel displays, where they are attractive because of their capability of multicolor emission, and low operation voltage. In this study, glass substrate/ITO/Eu(TTA)$_3$(phen)/Al, glass substrate/ITO/Eu(TTA)$_3$(phen)/Al and glass substrate/ITO/Eu(TTA)$_3$(phen)/AlQ$_3$/Al structures were fabricated by vacuum evaporation method, where aromatic diamine(TPD) was used as a hole transporting material, Eu(TTA)$_3$(phen) as an emitting material, and Tris(8-hydroxyquinoline) aluminu-m(AlQ$_3$) as an electron transporting layer. Electrolumescent(EL) and I-V characteristics of Eu(TTA)$_3$-(-phen) were investigated. These structures show the red EL spectra, which are almost the same at the PL spectrum of Eu(TTA)$_3$(phen). I-V characteristics of this structure show that turn-on voltage was 9V and current density was 0.01A/㎤ at a operation voltage of 9V. Electrical transporting phenomena of these structures were explained using the trapped-charge-limited current model with I-V characteristics.

• Journal of the Korean Chemical Society
• /
• v.51 no.6
• /
• pp.595-599
• /
• 2007

• Journal of the Korean Chemical Society
• /
• v.39 no.4
• /
• pp.318-322
• /
• 1995

• Journal of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.203-210
• /
• 1988

Mono-oxo-bridged binuclear molybdenum(V) complex, $[Mo_2O_3(Phen)_2(NCS)_4]$ produces di-oxo-bridged binuclear molybdenum(V) complex, $[Mo_2O_4(Phen)_2(NCS)_2]$ in water + co-solvent, where the co-solvent are acetone, acetonitrile and N,N-dimethylformamide. The rate of conversion of $[Mo_2O_3(Phen)_2(NCS)_4]\;into\;[Mo_2O_4(Phen)_2(NCS)_2]$ has been measured by spectrophotometric method. Temperature was $10^{\circ}C$ to $40^{\circ}C$ and pressure was varied up to 1500 bar. The rate constants are increased with increasing water mole fraction and decreased with increasing concentration of hydrogen ion. The order of oxygen ring formation reaction rate in various cosolvent is as follows, ACT > AN > DMF which is agreed with solvent dielectric constants. The observed negative activation entropy ($[\Delta}S^{\neq}$), activation volume($[\Delta}V^{\neq}$) and activation compressibility coefficient(${\Delta}{\beta}^{\neq}$) values show that the solvent water molecule is strongly attracted to the complex at transition state. From these results, the oxygen ring formation reaction of $[Mo_2O_3(Phen)_2(NCS)_4]$ is believed association mechanism.