• 한국항공우주학회지
• /
• 제40권3호
• /
• pp.258-263
• /
• 2012

본 논문은 천리안 위성의 추진계를 간략하게 소개하고 천리안 위성의 발사 및 초기 위성운용 수행 임무 중 위성 추진계의 일련의 과정에서 측정된 원격측정치를 제시한다. 일부 원격측정치는 기 개발된 프로그램의 계산결과와 비교하였다. 추진계의 압력변화는 주로 두단계로 구성된다. 첫 번째 단계는 위성 추진계의 초기화, 즉 안전을 위해서 추진제 탱크 후 단부터 추력기 상단까지 충전된 헬륨 가스를 진공인 우주공간으로 빼는 배출단계를 시작으로, 이 빈 배관망에 산화제와 연료를 각각 채우는 충전단계를 거치고 마지막으로 추진제 탱크의 압력을 일정한 압력까지 올리는 가압단계이다. 두 번째 단계는 목표궤도에 이를 때까지 수행하는 액체원지점엔진의 연소 단계이며, 이 단계에서는 추진제 탱크의 압력을 일정하게 유지 하기 위해서 가압제인 헬륨을 사용한다. 이 프로그램은 향후에 개발되는 정지 궤도복합위성의 기초 설계자료 생성에 사용할 수 있을 것이다.

• 한국항공우주학회지
• /
• 제36권4호
• /
• pp.357-367
• /
• 2008

향후 우리나라의 달탐사 임무에 대비하여 순간 추력을 이용한 한국형 달탐사 예비 임무 설계 소프트웨어를 개발하였다. 달 탐사 임무 수행을 위한 지구 출발 단계, 달 천이 단계, 달 도착 및 임무 수행 궤도 단계를 포함한 임무 설계가 이루어 졌다. 이 소프트웨어를 이용하면 순간 추력을 사용한 최적의 달탐사 비행궤적을 설계할 수 있다. 이를 바탕으로 우리나라의 우주 발사체인 KSLV-II를 사용할 때의 발사 가능한 달 탐사선의 최대 질량을 산출하여 보았다. 아울러 심우주 추적망을 이용하여 탐사선의 추적 가능 여부에 대한 해석이 이루어 졌으며 탐사선과의 통신, 태양 전지판의 지향점 해석 그리고 식기간의 분석을 위한 지구-달-탐사선-태양 간의 기하학적 위치에 대한 해석도 함께 이루어졌다.

• 한국주조공학회지
• /
• 제39권2호
• /
• pp.21-25
• /
• 2019

Microstructural and corresponding hardness changes of TiFe compounds with Zr (0~6 at%) or Ce (0~3 at%) were studied using samples prepared at different solidification rates. In arc-melted (TiFe)-Zr samples, the $Fe_{23}$ $Zr_6$ and $(Ti,\;Zr)_2Fe$ phases formed in the TiFe matrix, while in the (TiFe)-Ce sample, the $CeO_2$ phase formed along the grain boundary of the TiFe matrix. As the Zr content was increased, the volume fractions of the $Fe_{23}$ $Zr_6$ and $(Ti,\;Zr)_2Fe$ phases increased, forming a network structure. Accordingly, the hardness values of the samples also increased. With a small addition of Ce of approximately 0.1 at%, the as-cast microstructure could be effectively refined, reducing the average grain boundary diameter from ${\sim}100{\mu}m$ to ${\sim}14{\mu}m$. In the rapidly solidified sample prepared through a melt-spinning method, the constituent phases were identical to those of the arc-melted samples while the grains were refined. The microstructural changes of TiFe alloys can affect the hydrogen storage ability as well as the mobility of the hydrogen atoms in the alloys.

• 한국분말재료학회지
• /
• 제28권2호
• /
• pp.134-142
• /
• 2021

In this study, AlSi10Mg powders with average diameters of 44 ㎛ are additively manufactured into bulk samples using a selective laser melting (SLM) process. Post-heat treatment to reduce residual stress in the as-synthesized sample is performed at different temperatures. From the results of a tensile test, as the heat-treatment temperature increases from 270 to 320℃, strength decreases while elongation significantly increases up to 13% at 320℃. The microstructures and tensile properties of the two heat-treated samples at 290 and 320℃, respectively, are characterized and compared to those of the as-synthesized samples. Interestingly, the Si-rich phases that network in the as-synthesized state are discontinuously separated, and the size of the particle-shaped Si phases becomes large and spherical as the heat-treatment temperature increases. Due to these morphological changes of Si-rich phases, the reduction in tensile strengths and increase in elongations, respectively, can be obtained by the post-heat treatment process. These results provide fundamental information for the practical applications of AlSi10Mg parts fabricated by SLM.

• 한국지진공학회논문집
• /
• 제1권1호
• /
• pp.19-24
• /
• 1997

파형분석에 의한 영월지진의 본진과 두 여진에 대하여 연구하였다. 한국자원연구소(KIGAM)에서 제공된 지진기록의 파형분석을 위하여 12개의 가능한 파형에 대하여 주시곡선과 두 점을 잇는 파선추적이 사용되었다. 영월지진의 파형분석 결과는 다음과 같은 특성을 보여준다. 1) 본진(규모 4.5)에서는 Pn파형이 명확이 보이지만 두 여진(규모 3.8과 2.5)에서는 Pn파형이 보이지 않는다. 2) 두 여진에는 Pg 혹은 PmP파형이 초동파로 도착한다. 3) 비록 콘라드 불연속면이 실제로 존재하더라도 지진기록에서 콘라드면과 관계되는 파형을 구분하기가 어렵다. 4) 경상분지밖에 위치하는 구례(GRE) 관측소의 지진기록은 Pn파형의 도착시간, 주파수 등에서 경상분지 내에 위치하는 관측소의 기록과 비교할 때 차이를 보인다.

• 한국세라믹학회지
• /
• 제49권4호
• /
• pp.301-307
• /
• 2012

SiAlON glasses are silicates or alumino-silicates, containing Mg, Ca, Y or rare earth (RE) ions as modifiers, in which nitrogen atoms substitute for oxygen atoms in the glass network. These glasses are found as intergranular films and at triple point junctions in silicon nitride ceramics and these grain boundary phases affect their fracture behaviour. This paper provides an overview of the preparation of M-SiAlON glasses and outlines the effects of composition on properties. As nitrogen substitutes for oxygen in SiAlON glasses, increases are observed in glass transition temperatures, viscosities, elastic moduli and microhardness. These property changes are compared with known effects of grain boundary glass chemistry in silicon nitride ceramics. Oxide sintering additives provide conditions for liquid phase sintering, reacting with surface silica on the $Si_3N_4$ particles and some of the nitride to form SiAlON liquid phases which on cooling remain as intergranular glasses. Thermal expansion mismatch between the grain boundary glass and the silicon nitride causes residual stresses in the material which can be determined from bulk SiAlON glass properties. The tensile residual stresses in the glass phase increase with increasing Y:Al ratio and this correlates with increasing fracture toughness as a result of easier debonding at the glass/${\beta}-Si_3N_4$ interface.

• Journal of Animal Science and Technology
• /
• 제60권6호
• /
• pp.11.1-11.7
• /
• 2018

After pubertal, cohort of small antral follicles enters to gonadotrophin-sensitive development, called recruited follicles. This study was aimed to identify candidate genes in follicular cyclic recruitment via analysis of protein-protein interaction (PPI) network. Differentially expressed genes (DEGs) in ovine granulosa cells of small antral follicles between follicular and luteal phases were accumulated among gene/protein symbols of the Ensembl annotation. Following directed graphs, PTPN6 and FYN have the highest indegree and outdegree, respectively. Since, these hubs being up-regulated in ovine granulosa cells of small antral follicles during the follicular phase, it represents an accumulation of blood immune cells in follicular phase in comparison with luteal phase. By contrast, the up-regulated hubs in the luteal phase including CDK1, INSRR and TOP2A which stimulated DNA replication and proliferation of granulosa cells, they known as candidate genes of the cyclic recruitment.

• 대한산업공학회지
• /
• 제29권2호
• /
• pp.172-178
• /
• 2003

In the recent researches, a variety of ways for determining the locations of RBF centers have been proposed assuming that the number of RBF centers is known. But they have also many numerical drawbacks. We propose a new method to overcome such drawbacks. The strength of our method is to determine the locations and the number of RBF centers at the same time without any assumption about the number of RBF centers. The proposed method consists of two phases. The first phase is to determine the number and the locations of RBF centers using bi-section search method and enhanced k-medoids clustering which overcomes drawbacks of clustering algorithm. In the second phase, network weights are computed and the design of RBF network is completed. This new method is applied to several benchmark data sets. Benchmark results show that the proposed method is competitive with the previously reported approaches for center selection.

• Journal of Electrical Engineering and Technology
• /
• 제8권2호
• /
• pp.215-222
• /
• 2013

Electrical power distribution systems are critical links between the utility and customer. In general, power distribution systems have unbalanced feeders due to the unbalanced loading. The devices that dependent on balanced three phase supply are affected by the unbalanced feeders. This necessitates the balancing of feeders. The main objective of reconfiguration is to balance the loads among the phases subject to constraints such as load flow equations, capacity and voltage constraints and to reduce the real power loss, while subject to a radial network structure in which all loads must be energized. Therefore, the distribution system reconfiguration problem has been viewed as multi-objective problem. In this paper, the hybrid heuristic algorithm has been used for reconfiguration, which is the combination of fuzzy and greedy algorithms. The purpose of the introduction of greedy is to refrain the searching for the period of phase balancing. The incorporation of fuzzy helps to take up more objectives amid phase balancing in the searching. The effectiveness of the proposed method is demonstrated through modified IEEE 33 bus and modified IEEE 125 bus radial distribution system.

• Journal of Communications and Networks
• /
• 제7권4호
• /
• pp.471-477
• /
• 2005

This paper proposes an efficient constraint-based optimization model for the design of 3G mobile networks, such as universal mobile telecommunications system (UMTS). The model concerns about finding a set of sites for locating radio network controllers (RNCs) from a set of pre-defined candidate sites, and at the same time optimally assigning node Bs to the selected RNCs. All these choices must satisfy a set of constraints and optimize an objective function. This problem is NP-hard and consequently cannot be practically solved by exact methods for real size networks. Thus, this paper proposes a hybrid search strategy for tackling this complex and combinatorial optimization problem. The proposed hybrid search strategy is composed of three phases: A constraint satisfaction method with an embedded problem-specific goal which guides the search for a good initial solution, an optimization phase using local search algorithms, such as tabu algorithm, and a post­optimization phase to improve solutions from the second phase by using a constraint optimization procedure. Computational results show that the proposed search strategy and the model are highly efficient. Optimal solutions are always obtained for small or medium sized problems. For large sized problems, the final results are on average within $5.77\%$ to $7.48\%$ of the lower bounds.