• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.207-208
• /
• 2023

The procedure of predicting the construction cost and selecting the best alternative is performed based on comparative review of each building case. In the case of office building, it is required continuously until design is complete, since the owner requirements are various and likely to change during the design process compared to a standardized apartment. However, since the comparison work for each alternative in practice uses only the unit construction cost, there is no correlation between the alternative and the final result, and it is difficult to quantitatively determine the effect of the determined design factor on the total construction cost. It is needed that a means to support the generation of design alternatives using similar building cases during the design phase. This paper proposes a BIM-based data replacing process to support creating and comparison of design alternatives of internal finishing for office building. When design alternatives are created through the proposed process, it is possible to compare several similar cases with current project under equivalent design circumstance. Because only some finishing properties are replaced while maintaining the shape information such as the length, height, and base constraint of the object to be replaced.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.9
• /
• pp.64-71
• /
• 1994

In this study, optimizing BPOFs are encoded by Simulated Annealing algorithm that is widely used among the optimization algorithms. Two BPOFs are trained by digit patterns, 0~9, and the digits each having 4 intraclass patterns are multiplexed. When each digit is encoded by four bit binary code, from the results of computer simulation, the correlation pezk is shown at binary value 1 position among the spatially separated four positions at the correlation plane And then, the designed BPOFs are implemented by CGH technique. Through the optical correlation experiment, satisactory results are achieved, inspite of some experimental errors and information loss owing to the amplitude type CGH filter.

• Journal of Information Technology Services
• /
• v.4 no.2
• /
• pp.1-22
• /
• 2005

The object of this study is to elicit major success factors along with the phases of implementing the BPR in case of public corporations. To obtain the goal of this research, (1) this study reviews and integrates the major previous BPR studies and shows critical success factors of implementing BPR projects coincided with the characteristics of the public organizations. (2) This study has analyzed and arranged the details of BPR projects of public corporations in South Korea through the literature survey, the questionnaire and the interview. (3) This study classifies 40 critical success factors which were identified in existing studies into ones belonging to 3 phases of BPR projects implementation: Introduction Phase, Execution Phase and Stabilization Phase. (4) This study has tested the relation between critical success factors on each stage of BPR projects implementation and the performance variables. It has proven that there is the statistically significant correlation between the success factors and the performance. The findings of this study are thought not only to be useful as a practical guideline in carrying out BPR project Implementation but also to provide significant basis for constructing the theoretical framework of effective BPR project implementation strategy.

• PNF and Movement
• /
• v.18 no.3
• /
• pp.383-392
• /
• 2020

Purpose: Balance and gait dysfunction caused by aging affect elderly individuals' independent life, which, in turn, can reduce their overall quality of life. The purpose of this study is to compare the differences in the vestibular function of healthy elderly and young adults based on the subjective visual vertical (SVV) test as well as to compare and analyze the gait ability between these two groups to study the differences and association between vestibular, dizziness, and balance ability. Methods: The subjects were 18 young and 16 elderly adults with no neurological or musculoskeletal damage. To evaluate vestibular function, a subjective visual vertical test was performed. To evaluate the gait function, the step time, step length, stride length, stance phase ratio, and swing phase ratio were measured. Balance was evaluated using the Berg Balance Scale (BBS), and dizziness was evaluated using a dizziness handicap inventory (DHI). Results: There were significant differences in the SVV, BBS, and DHI between the young and elderly adults (p < 0.05). The gait variables of the older adults were all significantly different (except for the swing phase ratio) than those of the young adults (p < 0.05). As the result of correlation analysis, the SVV values of the young adults showed a significant negative correlation with step length and stride length (p < 0.05), while the SVV values of the elderly adults only showed a significant positive correlation with the DHI (p < 0.05). Conclusion: The elderly appeared to show a decrease in vestibular function when compared to the young adults, and it is thought that walking and balance function declined, while dizziness increased. Moreover, it is believed that these results can be used as basic data for vestibular rehabilitation in the future.

• 전자공학회논문지 IE
• /
• v.44 no.4
• /
• pp.41-47
• /
• 2007

In this paper, the performance of simulation model in mobile to mobile Rayleigh and Rician fading channel is analyzed and simulation results are compared. The auto-correlation and cross-correlation functions of Rayleigh fading channels not only based on received signals of Clarke's fading model and but also based on received signals of phase shifted Clarke's fading model are derived and their simulation results are found. The two models are also applied to mobile to mobile Rician fading channel models and their numerical results of auto-correlation functions of complex envelop received signals shows the statistical properties match the theoretical values very well and rapidly converge with the small number such as N=8.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10b
• /
• pp.781-783
• /
• 2004

재산권을 보호하기 위한 주요한 수단의 하나로 한국에서는 인감이 주로 사용되고 있다 본 논문에서는 인감의 동정(identification)을 위한 경제적이면서도 성능이 우수한 방법을 제안한다. 이 방법은 위상한 정상관을 이용하고 있다 이 방법을 이용하면 인감 패턴의 2치화, 세선화, 특징점 추출과 같은 복잡한 전처리과정을 거치지 않고도 등록된 인감과 입력인감이 같은 종류인지를 비교적 용이하게 구분해 낼 수 있다. 실험에서는 7종류의 각각의 인감에 대한 5가지 입력인감인 35개 인감화상을 사용하여 본 방법이 효과적임을 보인다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10b
• /
• pp.556-558
• /
• 2003

본 논문은 위상한정상관법을 이용하여 지문을 인식하는 알고리듬을 제안한다. 이 알고리듬은 유사도를 계산하기 위하여 고속푸리에 변환과 상관함수를 이용한다. 제안된 알고리듬은 동일인의 지문에 대하여 예리한 한 개의 피크만을 나타내므로 지문인식에 대한 명확한 결과를 보여준다. 더욱이 이 방법은 명확하게 입력되지 않은 지문에 대하여도 별도의 복잡한 전처리과정을 거치지 않고도 우수한 성능을 보여 준다. 또한 입력된 지문이 평행이동 한 경우에도 우수한 성능을 보여준다. 실험결과는 제안된 알고리듬이 지문을 인식하는데 효과적임을 보여준다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04b
• /
• pp.799-801
• /
• 2004

본 논문은 위상한정상관법을 이용하여 손상된 지문을 인식할 수 있는 방법을 제안한다. 위상한정상관법은 등록된 사람의 지문에 대하여 등록되지 않은 사람의 지문보다 상대적으로 높은 피크치를 나타내지만, 여러 가지 원인으로 손상된 지문에 대하여도 피크지에 대한 임계치를 찾아냄으로써 입력지문이 등록지문과 동일한지 여부를 판정할 수 있음을 보인다. 실험을 통하여 손상되는 원인별 실험적 임계치를 제시하고, 위상한정상관법과 제안된 임계지 설정방법에 의하여 손상된 지문에 대하여 유효함을 보인다.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.1
• /
• pp.108-114
• /
• 2007

The lyotropic behaviors to form the structure of distearoylphosphatidylcholine (DSPC)-based liquid crystal (LC) hydrated by only propylene glycol (PG) without water were examined by differential scanning calorimetry (DSC), X-ray diffractions (XRD), polarized microscope (PM) and transmission electron microscope (TEM). By increasing the amount of PG instead of water, it showed the phase transition to be gradually changed from anisotropic structures to other structures more close to isotropic ones and their appearance to be changed from solid-like states to liquid-like ones with more fluidity. Below 50% w/w PG, the mixtures of DSPC and PG resulted in no direct observation of LC structure through PM because they were very close to solid-states. From 55% w/w to 90% w/w of PG, the dense lamella crystalline structures were observed through PM, and their thickness and area decreased as the content of PG increased. Measured by DSC with heating process, the main phase transition from α -lamella phase to isotropic phase appeared from 52.89 °C to 47.41 °C to show linearly decreasing behaviors because PG affects the hydrophobic region of DSPC-based lamella phase. The repeating distance of the lamella phase and the interlayer distance between bilayers were calculated with XRDs and the average number of bilayers related to the thickness in LC structure was approximately estimated by combining with TEM results. The WAXS and DSC measurements showed that all of PG molecules contributed to swelling both the lipid layer in the edge region of lamella phase close to phosphate groups and the interlayer between bilayers below 90% w/w of PG. The phase and thermal behaviors were found to depend on the amount of PG used by means of dissolving DSPC as a phospholipid and rearranging its structure. Instead of water, the inducement of PG as a polar solvent in solid-lamella phase is discussed in terms of the swelling effect of PG for DSPC-based lamella membrane.

• Korean Journal of Materials Research
• /
• v.30 no.6
• /
• pp.315-320
• /
• 2020

This study deals with the yielding behavior and strain aging properties of three bake hardening steels with dual-phase microstructure, fabricated by varying the annealing temperature. Bake hardening and aging tests are performed to examine the correlation of martensite volume fraction with yielding behavior and strain aging properties of the bake hardening steels with dual-phase microstructure. The volume fraction of martensite increases with increasing annealing temperature. Room-temperature tensile test results show that the yielding behavior changes from discontinuous-type to continuous-type with increasing volume fraction of martensite due to higher mobile dislocation density. According to the bake hardening and aging tests, the specimen with the highest fraction of martensite exhibited high bake hardening with low aging index because solute carbon atoms in ferrite and martensite effectively diffuse to dislocations during the bake hardening test, while in the aging test they diffuse at only ferrite due to lower aging temperature.