• Journal of Power Electronics
• /
• 제1권2호
• /
• pp.78-87
• /
• 2001

A new high-power step-up based on the two-module parallel-input (PISO) modular dual inductor-fed push-pull converter is proposed. The proposed converter is operated at a constant duty cycle and employs and auxiliary circuit to control the output voltage with a phase-shift between two modules. It shows a high efficiency due to the greatly reduced switch turn-off stress. It also shows a high and linear voltage conversion ratio, low current stress in the output capacitor, and fast control-to-output dynamics. The operation principles and the mathematical models of the proposed converter are presented. Features of the proposed converter are discussed in comparison with the two-module PISO modular dual inductor-fed push-pull converter. Also, experimental results from a 50kHz, 800W, 350 Vdc prototype with an input voltage range of 20-32 Vdc are provided to confirm the validity of the proposed converter. The new converter compares favorably with the conventional counterpart, and is considered well siuted to high-power step-up applications.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.336-339
• /
• 2009

In this paper, such as battery power or solar energy and fuel cells generated from Renewable energy sources, high voltage to low voltage DC-DC Converter for converting the design of the study. System consists of low voltage ($24{\sim}28$ [VDC]) and Boosts the voltage (270 [VDC]) for a 3 [kW] DC-DC converter and control circuit is configured as, Power switch the ST Tomson's Automotive low voltage high current MOSFET switches STE250NS10S (temperature 250A) was applied to the two parallel. Also, Controller's processor used ATMEGA128, and Gate Drive applies and composed Photo Coupler TLP250. development. Input voltage (24V) and output voltage (270V) for Conversion in the H-bridge converter topology of the circuit output side power and voltage to control the implementation of the Phase shift angle control applied. And, 3kW of power to pass appropriate specification of the secondary side as interpreted by the high frequency transformer, and the experimental production and analysis of the experiment

• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.34-44
• /
• 2018

This paper presents a pulse-width adjustment (PWA) strategy for a novel bidirectional DC-DC boost converter to improve the performance of the dynamic inductor current response. This novel converter consists of three main components: a full-bridge converter (FBC), a high-frequency isolated transformer with large leakage inductance, and a three-level voltage-doubler rectifier (VDR). A number of scholars have analyzed the principles, such as the soft-switching performance and high-efficiency characteristic, of this converter based on pulse-width modulation plus phase-shift (PPS) control. It turns out that this converter is suitable for energy storage applications and exhibits good performance. However, the dynamic inductor current response processes of control variable adjustment is not analyzed in this converter. In fact, dc component may occur in the inductor current during its dynamic response process, which can influence the stability and reliability of the converter system. The dynamic responses under different operating modes of a conventional feedforward control are discussed in this paper. And a PWA strategy is proposed to enhance the dynamic inductor current response performance of the converter. This paper gives a detailed design and implementation of the PWA strategy. The proposed strategy is verified through a series of simulation and experimental results.

• 한국조명전기설비학회지:조명전기설비
• /
• 제8권4호
• /
• pp.38-45
• /
• 1994

본 논문에서는 신호감쇄 및 연집잡음(burst noise)이 존재하는 전력선 반송 채널에서 디지틀 데이터를 복조하기 위한 BPSK(Binary Phase Shift Keying) 복조기의 설계에 대하여 논한다. 이러한 BPSK 복조기의 실현에 있어서 반송파 동기호로는 소형화 및 안정화가 요구되며, 입력주파수의 변동에 대해서 낮은 위상 오차가 필요하게 된다. 이와 같은 요구조건을 만족하기 위해서 본 논문에서는 반송주파수가 10.4[kHz]이고, 전송속도가 110[bps]인 재변조방식의 BPSK 복조기를 설계 제작하였다. 설계 제작한 반송파 동기회로는 기존의 아날로그 소자로 구성되었던 승산기(multiplier) 및 지연회로를 PLL(Phase Locked Loop) IC로 대치하여 소형화 및 안정성을 확보하였으며, PLL회로 설계시에 주위온도 등을 고려하여 주파수 인입범위를 $\pm$4[kHz], 정상위상오차를 $\pm$60로 설정하였다. 기능시험 결과로부터, BPSK 복조기의 동작기능은 정상상태에서 설계조건에 만족함을 알 수 있었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.231-234
• /
• 2003

This paper presents a novel high frequency transformer linked full-bridge type soft-switching phase-shift PWM control scheme DC-DC power converter, which can be used as power conditioner fur small-scale fuel cell power generation system. Using full-bridge soft-switching DC-DC converter topology makes possible to use low voltage high performance MOSFETs to achieve high efficiency of the power conditioner. A tapped inductor filter is implemented in the proposed soft-switching converter topology to achieve soft-switching PWM constant high frequency operation for a wide load variation range. to minimize circulating and idling currents without using additional resonant circuit and auxiliary power switching devices. The practical effectiveness of the proposed soft-switching DC-DC converter is verified in laboratory level experiment with 1 kW 100kHz breadboard setup using power MOSFETs. Actual efficiency of 94-96$\%$ is obtained for the wide load range

• 조명전기설비학회논문지
• /
• 제24권1호
• /
• pp.105-111
• /
• 2010

본 논문에서는 배터리전원 또는 태양광과 연료전지 등의 신재생 전원에서 발생되는 저전압 에너지원을 고전압으로 변환하기 위한 DC-DC 컨버터의 설계에 대해 연구하였다. 입력 DC24[V] 전압을 출력전압 400[V]로 변환하기 위한 H-브리지 컨버터의 회로 토폴로지에 있어 출력측 전력 및 전압을 제어하기 위해 위상천이제어를 적용하여 구현하였다. 제안된 컨버터 시스템의 장점으로는 전류 스트레스 감소 및 높은 효율성, 신뢰성 및 단순화된 관리뿐만 아니라 저렴한 비용 등을 들 수 있으며, 가정용 전력 생산을 위한 시스템으로 매우 유용하다는 것을 알 수 있었다.

• Journal of the Optical Society of Korea
• /
• 제17권5호
• /
• pp.423-427
• /
• 2013

We present the preparation and characteristics of liquid-phase sensors based on nano-porous silicon multilayer structures for determination of organic content in gasoline. The principle of the sensor is a determination of the cavity-resonant wavelength shift caused by refractive index change of the nano-porous silicon multilayer cavity due to the interaction with liquids. We use the transfer matrix method (TMM) for the design and prediction of characteristics of microcavity sensors based on nano-porous silicon multilayer structures. The preparation process of the nano-porous silicon microcavity is based on electrochemical etching of single-crystal silicon substrates, which can exactly control the porosity and thickness of the porous silicon layers. The basic characteristics of sensors obtained by experimental measurements of the different liquids with known refractive indices are in good agreement with simulation calculations. The reversibility of liquid-phase sensors is confirmed by fast complete evaporation of organic solvents using a low vacuum pump. The nano-porous silicon microcavity sensors can be used to determine different kinds of organic fuel mixtures such as bio-fuel (E5), A92 added ethanol and methanol of different concentrations up to 15%.

• 대한안전경영과학회지
• /
• 제17권3호
• /
• pp.163-171
• /
• 2015

The aim of this study was to investigate kinematic mechanism of gait different road conditions(dry vs. oil) in order women. For this study, twenty older women and ten young women participated in this research. twelve infrared cameras were used to collect data. It appeared that the gait strategies of older women were slower velocity and higher CoM than young women. Depending on road conditions, gait velocities of dominant muscle older women on dry surface were faster than dominant sense older women, but those of them were inverse on oil surface. The slip displacement of dominant muscle older women was less than young women, but the slip displacement of dominant sense older women was greater than young women. In case of blind during stance phase on oil surface, the rotational motion of the ankle and knee joints were increased. In conclusion, older women were subjected to self-organization theory and phase shift in dynamic theory.

• 조명전기설비학회논문지
• /
• 제21권5호
• /
• pp.10-24
• /
• 2007

본 연구에서는 연료전지의 전압을 $380[V_{DC}]$로 승압하기 위한 새로운 절연형 DC-DC 컨버터와 단상 $220[V_{DC}]$로 변환하기 위한 LC필터를 가진 PWM 인버터로 구성된 연료전지용 전력변환장치를 제안하였다. 여기서 기존의 컨버터보다 부품수가 적고 제어가 용이하며, 대용량에 적합한 새로운 DC-DC 컨버터는 2차측에 스위치 $S_5,\;S_6$을 추가로 구성하여 위상천이 폭을 조절함으로써 출력 전력을 제어할 수 있으며, 넓은 출력 전압 조정에서도 $93{\sim}97[%]$의 효율을 얻을 수 있다. 그리고 연료전지와 유사한 출력 특성을 갖는 연료전지 시뮬레이터를 구현하였으며, 적절한 데드 타임 td을 제어하여 고주파 변압기의 여자 전류의 피크값과 고주파 변압기 1차측 전류가 일치하는 부분에서 소프트 스위칭을 실현 시켰다. 또한 직렬 인덕턴스 La를 추가적으로 적절하게 설정하여 2차측의 스위치와 직렬 다이오드에 발생하는 서지 전압과 경부하시에 발생되는 도통 손실을 저감시켰다. 끝으로 TMS320C31보드와 EPLD를 이용한 PWM 스위칭 기법에 의해 동작하는 단상 인버터를 설계, 제작하여 가정용 교류전압 공급에 유용하게 활용할 수 있다.

• 전기학회논문지
• /
• 제57권6호
• /
• pp.972-981
• /
• 2008

A New ZVS(Zero Voltage Switching) and ZVZCS(Zero Voltage and Zero Current Switching) Three-Level Converter is proposed. The proposed converter presented in this paper used a phase shift control with a flying capacitor in the primary side to achieve ZVS for the all switch. A primary auxiliary circuit, which consists of one coupled inductor, is added in the primary to provide ZVZCS conditions to primary switches. Many advantages including simple circuit topology high efficiency, and low cost make this converter attractive for high power applications. The principle of operation, feature and design considerations are illustrated and verified through the experiment with a 2kW(27V, 74A) 40 kHz IGBT based experimental circuit.