• Communications for Statistical Applications and Methods
• /
• 제17권3호
• /
• pp.391-411
• /
• 2010

For estimating the mean of a finite population, three classes of estimators using multi-auxiliary information with unknown means using two phase sampling in presence of non-response have been proposed with their properties. Asymptotically optimum estimator(AOE) in each class has been identified along with their mean squared error formulae. An empirical study is also given.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.955-959
• /
• 2003

A technique for realizing linear phase IIR filters has been proposed by Powell-Chau which gives a real-time implementation of H(z-1).H(z), where H(z) is a causal nonlinear phase IIR filter. Powell-Chau system is linear but not timeinvariant system. Therefore, that system has group delay response that exhibits a minor sinusoidal variation superimposed on a constant value. In the signal processing, this oscillation seriously degrade the signal quality. Unfortunately, that system has a large sample delay of 4L and also more computational complexity. Proposed system is present a reduced computational complexity technique by moved the numerator polynomial of H(1/z) out to cascade with causal filter H(z) and remain only all-pole of H(1/z), then applied truncated infinite impulse response to finite with truncated IIR filtel $H_L$(z) and L sample delay to subtract the output sequence from the top and bottom filter. Proposed system is linear time invariance and group delay response and total harmonic distortion are also improved.

• 전기학회논문지
• /
• 제64권7호
• /
• pp.1005-1011
• /
• 2015

This paper proposes the DC offset compensation algorithm with fast response to the sensed grid voltage in the single-phase grid connected inverter. If the sensor of the grid voltage has problems, the DC offset of the grid voltage can be generated. This error must be resolved because the DC offset can generate the estimated grid frequency error of the phase-locked loop (PLL). In conventional algorithm to compensate the DC offset, the DC offset is estimated by integrating the synchronous reference frame d-axis voltage during one period of the grid voltage. The conventional algorithm has a drawback that is a slow dynamic response because monitoring the one period of the grid voltage is required. the proposed algorithm has fast dynamic response because the DC offset is consecutively estimated by transforming the d-axis voltage to synchronous reference frame without monitoring one cycle time of the grid voltage. The proposed algorithm is verified from PSIM simulation and the experiment.

• 한국가금학회:학술대회논문집
• /
• 한국가금학회 2003년도 제20차 정기총회 및 학술발표회
• /
• pp.89-90
• /
• 2003

중탄산소다 함유 대두유 사료는 급성기 반응에 의한 생산성(증체, 사료효율, 칼슘밸런스, 뇨질소 배설량 및 NB) 감소 완화작용이 있었으며, 이때 에너지원의 흡수 증가에 의한 대사에너지 값의 상승과 인 발란스의 증가 및 적혈구 세포액중의 SOD 및 순환 세룰로플라민스의 활성 감소가 관찰되었다. 본 결과는 급성기 반응중의 사료에너지 이용과 전해질 농도는 항산화계의 변화와 상관관계가 있다는 것을 나타내었다.

• 한국추진공학회지
• /
• 제2권1호
• /
• pp.59-66
• /
• 1998

고체 추진제 연소불안정에 관한 해석은 준-정상 1차원 해석인 QSHOD(Quasi-Steady Homo-geneous One-Dimension)에 의하여 단순화된 지배방정식을 이용하여 응축영역을 해석하는 것이 일반적이다. 이때 외부교란에 대한 기체영역과 표면반응 영역의 응답은 화학반응이 발생하지 않는 고체영역의 응답에 비하여 매우 빠르므로 준-정상적인 거동을 한다. 본 연구에서는 복사열전달에 의한 열속(heat flux)이 고체 추진제의 표면에 존재하며 이 중의 일부가 고체영역으로 흡수될 때 표면에서의 선형교란을 고려한 ZN(Zeldovich-Novozhilov) 방법을 이용하여 연소불안정 현상을 이론적으로 해석하여 연소불안정 현상을 설명할 수 있는 연소 응답함수를 구하였다. 응답함수는 T-burner의 실험결과를 예측할 수 있음을 보여주었다.

• 한국전자통신학회논문지
• /
• 제16권4호
• /
• pp.591-598
• /
• 2021

디지털 위상 고정 루프는 위상 동기화를 위해 사용되는 회로로 일반적으로 통신, 회로분야 등 다양한 분야에서 사용된다. 디지털 위상 고정 루프를 설계 시 상태추정기를 사용하는 경우 보통 칼만 필터와 같은 무한 임펄스 응답 상태추정기를 활용해왔다. 일반적으로 무한 임펄스 응답 상태추정기 기반 디지털 위상 고정 루프의 성능은 우수하지만, 초기값의 부정확, 모델 오차, 외란 등의 예상하지 못하는 상황에서 급격한 성능저하가 발생할 수 있다. 본 논문에서는 새로운 디지털 위상 고정 루프를 설계 하기 위해 최적의 측정값 구간 길이를 갖는 최소 공분산 유한 임펄스 응답 필터를 제안한다. 제안된 유한 임펄스 응답 필터의 중요 파라미터인 측정값 구간 길이를 구하기 위해 수치적 방법을 소개하며, 필터의 이득을 얻기 위해 비용함수로 오차의 공분산 행렬을 설정하고, 이를 최소화 하기 위하여 선형 행렬 부등식을 사용하였다. 제안된 디지털 위상 동기 루프의 우수성과 강인성을 검증하기 위해 노이즈 정보가 부정확한 상황에서 기존 방법과의 비교 및 분석을 위한 시뮬레이션을 수행하였다.

• 전기학회논문지
• /
• 제57권1호
• /
• pp.117-120
• /
• 2008

This paper investigates the convergence condition of ADILC(iterative learning control with advanced output data) for nonminimum phase systems. ADILC has simple learning structure including both minimum phase and nonminimum phase systems. However, for nonminimum phase systems, the overall time horizon must be considered in input update law. This makes the dimension of convergence condition matrix large. In this paper, a new sufficient condition is proposed to satisfy the convergence condition. Also, it has been shown that this sufficient condition can be satisfied although it is not full impulse response.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.225-227
• /
• 2006

This note investigates the convergence condition of ADILC (iterative learning control with advanced output data) for nonminimum phase systems. ADILC has simple learning structure including both minimum phase and nonminimum phase systems. However, for nonminimum phase systems, the overall time horizon must be considered in input update law. This makes the dimension of convergence condition matrix large. In this paper, a new sufficient condition is proposed to satisfy the convergence condition. Also, it has been shown that this sufficient condition can be satisfied although it is not full impulse response.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.141-148
• /
• 2006

This study describes a generation of artificial earthquake wane compatible with seismic design spectrum. In seismic response analysis of building structures, the input ground accelerations have considerable effect on dynamic characteristics of structures. Therefore, it is important to properly select input ground motions for seismic response analysis. In this paper, the artificial earthquake wave are generated according to previously recorded earthquake waves in past earthquake events. The artificial wave have identical phase angles to the recorded earthquake wane, and their overall response spectra are compatible with seismic design spectrum with 5% of critical viscous damping. Each simulated earthquake wave has a identical phase angles to the original recorded ground acceleration, and match to design response spectra in the range of period from 0.02 to 10.0 seconds. It is concluded that the artificial earthquake waves simulated in this paper ate applicable as input ground motions for a seismic response analysis of building structures.

• Journal of Power Electronics
• /
• 제17권5호
• /
• pp.1203-1210
• /
• 2017

This paper presents an improved switching selection method for the direct torque control (DTC) of five-phase induction motors (IMs). The proposed method is conducted using optimal switching selection. A five-phase inverter has 32 voltage vectors which are divided into 30 nonzero voltage vectors and two zero voltage vectors. The magnitudes of the voltage vectors consist of large, medium, and small voltage vectors. In addition, these vectors are related to the torque response and torque ripple. When a large voltage vector is selected in a drive system, the torque response time decreases with an increased torque ripple. On the other hand, when a small voltage vector is selected, the torque response time and torque ripple increase. As a result, this paper proposes an optimal voltage vector selection method for improved DTC of a five-phase induction machine depending on the situation. Simulation and experimental results verify the effectiveness of the proposed control algorithm.