• Bulletin of the Korean Chemical Society
• /
• v.26 no.6
• /
• pp.998-1000
• /
• 2005

• Journal of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.263-270
• /
• 1989

Aluminum alkoxide, $Al(OC_3H_7\^i)_3\;and\;Al(OC_4H_9^s)_3$, were synthesized using aluminum sheet and corresponding alcohols to prepare various phase alumina in high purity. Aluminum hydroxides were prepared by hydrolysis of synthesized Al-alkoxides and from reagent $AlCl_3$. The catalytic properties of ${\gamma}$ and ${\eta}-Al_2O_3$ prepared at various temperatures were investigated and the reaction kinetics of ${\alpha}-Al_2O_3$ formation from $Al(OH)_3$ was considered.

• Journal of the Korean Ceramic Society
• /
• v.33 no.3
• /
• pp.277-284
• /
• 1996

The water test results indicated that the impurities had detrimetal effect on the wear resistance of silicon nitride and the effects were getting severe as the temperature increased. Especially when Ca existed as an impurity the detrimental effects was the most severe. These results were resulted from the fact that impurities lowered the mechanical properties of the grain boundary phase of silicon nitride. The wear test results of glass/glass-ceramic specimens having a similar composition to the grain boundary phase of silicon nitride revea-led that the specimen containing CaO showed the lowest wear resistance. The existence of Fe and Ca at the grain boundary phase assisted forming a grain boundary phase with relatively low refractoriness. Therefore at a given wear condition the removal of deformed layer would be easier. The results showed that the glass phases could be modified by heat-treatment and this modification improved tribological characteristics of the silicon nitride.

• Analytical Science and Technology
• /
• v.24 no.5
• /
• pp.360-367
• /
• 2011

Optical purities of 10 commercialized naproxens prepared from eight Korean drug companies were examined by an optimized chiral HPLC condition. The Chiralcel OD-H column and ChiralHyun-LE(S)-1 column were used as chiral stationary phases and the mixed eluent of hexane/isopropanol/acetic acid as 100:2.85:0.1 was used as a mobile phase for effective enantioseparation. Optical purity values of most samples were higher than 97 percents, only one of them was about 95 percents. The average relative standard deviation of them appeared very small (0.034%).

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.1
• /
• pp.99-110
• /
• 2004

In order to investigate the performance of carbon dioxide PSA over zeolite adsorbent, the present study showed results of isotherm measurement, cyclic operation of 3-bed apparatus, and the corresponding numerical simulation. The experiment data of bed temperature, purity, recovery were matched well with that of numerical simulation. Purity of both gas and adsorbent phase increased rapidly with rinse rate but the degree of increase was retarded for large rinse rate The total amount of adsorbed increased only 10% even if rinse rate was enlarged to 4 times. Optimal rinse rate was 7N㎥/hr in this study. The heating rinse led to augments in recovery and productivity, possibly thanks to ease of description resulting from increased volumetric rinse rate and temperature rise in the column.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.97.5-97
• /
• 2001

This paper presents development of a user-friendly automatic control system for ESR(Electro-Slag Remelting or Refining) process. It is a second-phase refining one, commonly applied to production of high-purity specialty steel. A primarily refined castingot acts as a consumable electrode and melts by the electric resistance heat generated when high current is induced through a slag bath. The quality of product is evaluated by its chemical composition, purity, micro-structure, uniformity, mechanical property, etc. To meet the standards, above all things, the process should be kept sound and the melt rate should track the optimum profile irrespective of environment variations. Current ESR system is manually operated ...

• Journal of the Korean Ceramic Society
• /
• v.35 no.2
• /
• pp.129-136
• /
• 1998

The effects of MgO on the resistance to corrosion and oxidation of Al2O3-SiC-C refractory have been in-vestigated. The resistance to oxidation was improved as the amount of MgO increased. The resistance to corrosion was enhanced until 2 wt% MgO content but degraded over that content. From the dependence of temperatuer on the oxidation resistance oxidation was suppressed by the microstructural densification caused by spinel formation over 1200~130$0^{\circ}C$and the formation MgO-Al2O3-SiO2 liguid-phase over 130$0^{\circ}C$ The weight loss of specimens containing MgO with various purity at range of 95 to 99% and par-ticle size of -0.045 mm to -0.074 mm was examined. The oxidation resistance was not changed signficantly with the particle size and purity of MgO powders.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.6
• /
• pp.1028-1032
• /
• 1997

Low-temperature crystallization method silver nitrate-impregnated silicic acid column chromatography were applied for the isolation of pure $\alpha$-linolenic acid(ALA) from perilla seed oil. ALA or 78% in purity(HALA; yield, 83%) was obtained from the fatty acid mixture(ALA, 65.7%) derived from perilla oil by the low-temperature crystallization method, when the mixture was frozen at -8$0^{\circ}C$ for 210min. ALA over 90% in purity(yield, 71%) was also obtained from HALA ethyl esters(ALA, 78%) by the silver nitrate-impregnated silicic acid column(100cm$\times$10cm, i.d.) chromatography. In addition, the silver nitrate-impregnated silicic acid could be semipermanently used for isolation of ALA, because $Ag^{+}$ ion was not dissociated from the stationary phase.

• Journal of Powder Materials
• /
• v.27 no.6
• /
• pp.464-467
• /
• 2020

Nickel nanopowders are obtained by the spark discharge method, which is based on the evaporation of the electrode surface under the action of the discharge current, followed by vapor condensation and the formation of nanoparticles. Nickel electrodes with a purity of 99.99% are used to synthesize the nickel nanoparticles in the setup. Nitrogen is used as the carrier gas with a purity of 99.998%. XRD, TEM, and EDX analyses of the nanopowders are performed. Moreover, HRTEM images with measured interplanar spacings are obtained. In the nickel nanopowder samples, a phase of approximately 90 wt% with an expanded crystal lattice of 6.5% on average is found. The results indicate an unusual process of nickel nanoparticle formation when the spark discharge method is employed.

• Proceedings of the PSK Conference
• /
• 2003.10b
• /
• pp.219.1-219.1
• /
• 2003

$^1$H-NMR method for the determination of enantiomeric purity of (S)-(+)-ibuprofen was developed using (-)-cinchonidine as a chiral solvating agent. (S)-(+)-ibuprofen was prepared by optical resolution of racemic ibuprofen using preferential recrystallization method with (S)-(-)-${\alpha}$-methylbenzylamine and (R)-(-)-ibuprofen by semi-preparative chiral HPLC using chiral OD column and n-hexane/2-propanol/trifluoroacetic acid as a mobile phase. Several concentrations of synthetic mixture of (S)-(+)-ibuprofen and (R)-(-)-ibuprofen were added to the (-)-cinchonidine disolved in CDCl$_3$. (omitted)