• 한국해양학회지
• /
• v.18 no.2
• /
• pp.117-124
• /
• 1983

Pizza's synthetic model, a modified Wiener filter method, was tested to establish the procedure of desirable interpretive wavelet extraction and its application to the marine seismic exploration using several approaches with a real offshore seismic data of the southeast Asia. Noise spectrum acquisition is difficult and any assumptions for it do not produce interpretive wavelets as good as synthetic model result by Piazza (1979). however the resolution could be improved with spiking deconvoultion and following zero phase bandpass filter, and the testing procedure and evaluatttion of results can hopefully contribute in future study and practical evaluation of Piazza's method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.1
• /
• pp.47-55
• /
• 1994

This paper investigates the performance analysis of the packet DS/SS receiver with a PJED(phase-jump error detector) using the block signal processing(BSP) methods. The conventional packet DS/SS block receiver has a high probability of mistaking the phase-jump detection, which causes the frequency estimation error. The conventional receiver uses a Matched-Pulse Timing Extractor which has a complicated structure. The proposed packet DS/SS block receiver with the PJED which uses libearity of the phase has little probability of mistaking the phase-jump detection. The proposed Matched Pulse Timing Extractor gas the more simple structure but obtains the same performance on the exact matched-pluse timing as the conventional one does. The simulation results show that the proposed receiver gives about 2dB improvement in the BER compared with the conventional receiver.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.1
• /
• pp.36-42
• /
• 2001

This paper propose new sound localization algorithm that detects the sound source bearing in a closed office environment using two microphone array. The proposed Subband CPSP (Cross Power Spectrum Phase) algorithm is a development of previously Down CPSP method using subband approach. It first split the received microphone signals into subbands and then calculates subband CPSP which result in possible source bearings. This type of algorithm, Subband CPSP, can provide more robust and reliable sound localization system because it limits the effects of environmental noise within each subband. To verify the performance of the proposed Subband CPSP algorithm, a real time simulation was conducted and it was compared with previous CPSP method. From the simulation results, the proposed Subband CPSP is superior to previous CPSP algorithm more than 5％ average accuracy for sound source detection.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.11
• /
• pp.95-101
• /
• 2008

We have used diversely the multilayer ceramic oscillator of the SMD(Surface Mounted Device) package technology that connects the crystal with the chip package. Such an oscillator occurs a stray inductance and a parasitic capacitance by the length and inner pattern. And it has been happened an amplitude attenuation and signal loss due to the reflection of power source and noise component. So we don't evaluate the precise performance of the oscillator for these factors. In this paper we have developed the Jig system to evaluate the performance of the oscillator. Through this system, we will expect an advanced performance of the oscillator and redesign an oscillator of the low jitter characteristics and low phase noise.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.4E
• /
• pp.52-60
• /
• 2001

This paper describes real time implementation of subband sound localization system on a floating-point DSP TI TMS320C31. The system determines two dimensional location of an active speaker in a closed room environment with real noise presents. The system consists of an two microphone array connected to TI DSP hosted by PC. The implemented sound localization algorithm is Subband CPSP which is an improved version of traditional CPSP (Cross-Power Spectrum Phase) method. The algorithm first split the input speech signal into arbitrary number of subband using subband filter banks and calculate the CPSP in each subband. It then averages out the CPSP results on each subband and compute a source location estimate. The proposed algorithm has an advantage over CPSP such that it minimize the overall estimation error in source location by limiting the specific band dominant noise to that subband. As a result, it makes possible to set up a robust real time sound localization system. For real time simulation, the input speech is captured using two microphone and digitized by the DSP at sampling rate 8192 hz, 16 bit/sample. The source location is then estimated at once per second to satisfy real-time computational constraints. The performance of the proposed system is confirmed by several real time simulation of the speech at a distance of 1m, 2m, 3m with various speech source locations and it shows over 5% accuracy improvement for the source location estimation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.5
• /
• pp.854-859
• /
• 2009

Many pilot projects are developed using USN(Ubiquitous Sensor network). Recently USN has more attention to be used for the applications of circumstance monitoring. In order to acquire information from sensor nodes, sensor nodes need a RF transceiver. In this paper we describe the design of a RF transceiver, based on IEEE 802.15.4, for sensor nodes operating in 2.4GHz frequency band. The architecture to be implemented and the electrical performance specifications satisfied IEEE 802.15.4 are presented. The noise figure of a receiver, selectivity, phase noise of a frequency synthesizer, transmitter's linearity and spectrum mask are derived as a design parameters from the specifications of IEEE 802.15.4.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.291-294
• /
• 2003

The circuit substrate was made from the Low Temperature Cofired Ceramics(LTCC) that a $\varepsilon_\gamma$ was 7.8. Accumulated Varactor and the low noise transistor which were a Surface Mount Device-type element on LTCC substrate. Let passive element composed R, L, C with strip-line of three dimension in the multilayer substrate circuit inside, and one structure accumulate band-pass filter, resonator, a bias line, a matching circuit, and made it. Used Screen-Print process, and made Strip-line resonator. A design produced and multilayer-type VCO(Voltage Controlled Oscillator), and recognized a characteristic with the Spectrum Analyzer which was measurement equipment. Measured multilayer structure VCO is oscillation frequency 1292[MHz], oscillation output -28.38[dBm], hamonics characteristic -45[dBc] in control voltage 1.5[V], A phase noise is -68.22[dBc/Hz] in 100 KHz offset frequency. The oscillation frequency variable characteristic showed 30[MHz/V] characteristic, and consumption electric current is approximately 10[mA].

• Korean Journal of Optics and Photonics
• /
• v.22 no.3
• /
• pp.122-128
• /
• 2011

The AWG-filtering effect was investigated on a bidirectional 100-GHz-channel-spacing WDM-PON link using spectrum-sliced and RSOA-amplified light sources for downstream signals and a wavelength reuse technique for upstream signals. Signal performances of three different filtering AWGs, including Gaussian, trapezoidal, and rectangular types, were compared on link transmission with fiber nonlinear effects. As an extinction ratio of a downstream signal varied, the effect for both directional signals was analyzed and optimized. It was found that there was an optimal pass bandwidth of an AWG for the balance between relative intensity noise decrement and cross phase modulation noise increment as the bandwidth got wider.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.1
• /
• pp.42-48
• /
• 1988

MM(multimode) PWM(pulse width modulation) Suitable for high performance and harmonic effects minimization of VSI (voltabge source invertetr)-IM (induction motor)drive system is proposed. The approximated optimal, suboptimal and optimal PWM are implemented in the low frequency range, while square wave operation is realized in the hibh frequency range. The pulse width Modulator is capable of generating control signals to a transistorized inverter operating at about 1KHz. All functions except digital comparison have been implemented in softyware making the scheme economical, flexible and reliable. Pulse width modulator is built and tested experimentally. In order to confirm the effectiveness and the reliability of the theoretical proposition, this scheme is applied to 1Hp, Three phase IM. As results, it is concluded that the scheme of MM PWM is superior to other conventional switching scheme through the discussions or analysis carried out on the items such as line-to-line voltage, current and spectrum of current harmonic components observed at the output terminal of inverter, noise level of motor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.1
• /
• pp.11-21
• /
• 1989

In this paper, a GMSK modulator was implemented with a gaussian lowpass filter using digital signal processing, a phase integration, D/A convers and auxiliary circuits. The relatively narrow bandwidth of power spectrum of the GMSK modulator is observed when the cut off frequency (B T) of the gaussian baseband filter is varied. In a demodulator, a discriminator type circuit is used. Using the above degital radio GMSK modem, BER is theoretically derived and experimentally measured when 16Kbps PRBS data is transmitted under Rayleigh fading and additive white gaussian noise conditions.