• 제목/요약/키워드: phase jump

검색결과 96건 처리시간 0.021초

웹 응용 시스템 개발을 위한 업무모델 기반의 분석방법 (The Analysis Method based on the Business Model for Developing Web Application Systems)

  • 조용선;정기원
    • 한국정보과학회논문지:소프트웨어및응용
    • /
    • 제30권12호
    • /
    • pp.1193-1207
    • /
    • 2003
  • 여러 분야에서 인터넷의 사용이 대중화되면서 다양한 웹 응용들이 개발되고 있으나, 대부분의 경우 체계적인 분석작업을 수행하지 못하고 개발에 뛰어들거나, 대규모 개발 방법론을 적용하면서 어려움을 겪고 있다. 본 논문에서는 빠르고 효과적인 개발을 위하여 업무모델로부터 웹 응용을 위한 분석 모델들을 추출하는 방법을 제안하며, 이를 효과적으로 수행하기 위한 작업들과 기법들을 제시한다. UML 활동도의 표기법을 활용한 업무 모델로부터 사용사례도와 웹 페이지 리스트를 생성하며, 이를 기반으로 웹 페이지들의 흐름과 구조를 표현하는 페이지 다이어그램과 논리적, 물리적 데이타베이스 모델들을 작성한다. 이렇게 작성된 분석모델들은 상세설계 단계를 거쳐 정제된다. 제안한 분석방법과 기법들을 웹 기반의 경정비조합 지원시스템 개발에 적용하여 그 효용성을 확인하였다.

플랫폼 다이빙 앞으로 서서 앞으로 11/2회전 동작의 운동역학적 분석 (A Kinetics Analysis of Forward 11/2 Somersault on the Platform Diving)

  • 전경규
    • 한국운동역학회지
    • /
    • 제23권3호
    • /
    • pp.209-218
    • /
    • 2013
  • This study was to perform the kinetic analysis of forward $1\frac{1}{2}$ somersault on the platform diving. Six men's diving players of the Korea national reserve athletes participated in this study. The variables were analyzed response time, velocity, center of mass (COM), angle, center of pressure (COP) and ground reaction force (GRF) of motion. For measure and analysis of this study, used to synchronized to 4 camcorder and 1 force plate, used to the Kwon3D XP (Ver. 4.0, Visol, Korea) and Kwon GRF (Ver. 2.0, Visol, Korea) for analyzed of variables. The results were as follows; Time factor were observed in maximum knee flexion depending on the extent of use at phase 1 of take-off to execute the somersault. This enabled the subject to secure the highest possible body position in space at the moment of jumping to execute the somersault and prepare for the entry into the water with more ease. Regarding the displacement of COM, all subjects showed rightward movement in the lateral displacement during technical execution. Changes in forward and downward movements were observed in the horizontal and vertical displacements, respectively. In terms of angular shift, the shoulder joint angle tended to decrease on average, and the elbow joints showed gradually increasing angles. This finding can be explained by the shift of the coordinate points of body segments around the rotational axis in order to execute the half-bending movement that can be implemented by pulling the lower limb segments toward the trunk using the upper limb segments. The hip joint angles gradually decreased; this accelerated the rotational movement by narrowing the distance to the trunk. Movement-specific shifts in the COP occurred in the front of and vertical directions. Regarding the changes in GRF, which is influenced by the strong compressive load exerted by the supporting feet, efficient aerial movements were executed through a vertical jump, with no energy lost to the lateral GRF.

$BaTiO_3$계 PTC 재료에서 입계 modifier의 역할 (The role of grain boundary modifier in $BaTiO_3$ system for PTCR device)

  • 이준형;조상희
    • 한국재료학회지
    • /
    • 제3권5호
    • /
    • pp.553-561
    • /
    • 1993
  • 본 연구에서는 입계의 성질을 이용한 PTCR 재료에 입계 modifier로서 $Bi_2O_3$를 첨가하고 입계의 미세구조와 결함농도를 변화시켜 이에 따른 소결 및 전기적 특성변화를 TMA, XRD, 복합 임피던스방법 등을 이용하여 해석하였다. 실험 결과 Y이 도우핑된 $BaTiO_3$PTCR 재료에 $Bi_2O_3$를 첨가하였을때 약 0.1mol%까지 고용이 되는 것으로 밝혀졌다. $Bi_2O_3$를 고용한계 이하로 첨가시에는 생성되는 vacancy등의 결함으로 말미암아 $Y-BaTiO_3$의 치밀화가 촉진되었으나, 그 이상 첨가하면 치밀화 뿐만 아니라 결정립 성장도 억제되었다. $Bi_2O_3$의 첨가량에 따라 계내에 존재하는 각 이온의 반경, 결함 반응식 및 격자 탄성 변형 에너지 등을 고려하면 $Y-BaTiO_3$결정립 내부에 Ba와 Ti vacancy가 동시에 생길 수 있어 고온저항이 높아짐을 알 수 있었다. BN은 $BaTiO_3$에 고용이 되지 않는 것으로 밝혀졌으며 $B_2O_3$를 주성분으로한 액상형성으로 인하여 저온에서의 급격한 치밀화가 관찰되었다. 또 Ba-Y-Ti-B-O의 비정질 상이 tripie junction에 존재함으로써 상온저항이 크게 변화하였으며, PTCR jump도 높아졌다.

  • PDF

보행과 한발·두발 수직점프 수행 시 내측비복근 근-건 복합체와 근섬유다발의 길이 변화 패턴의 차이 (Differences in the Length Change Pattern of the Medial Gastrocnemius Muscle-Tendon Complex and Fascicle during Gait and One-legged and Two-legged Vertical Jumping)

  • 이해동;한보람;김진선;오정훈;조한엽;윤소야
    • 한국운동역학회지
    • /
    • 제25권2호
    • /
    • pp.175-182
    • /
    • 2015
  • Objective : The purpose of this study was to investigate difference in fascicle behavior of the medial gastrocnemius during the locomotion with varying intensities, such as gait and one-legged and two-legged vertical jumping. Methods : Six subjects (3 males and 3 females; age: $27.2{\pm}1.6yrs.$, body mass: $62.8{\pm}9.8kg$, height: $169.6{\pm}8.5cm$) performed normal gait (G) at preferred speed and maximum vertical jumping with one (OJ) and two (TJ) legs. While subjects were performing the given tasks, the hip, knee and ankle joint motion and ground reaction force was monitored using a 8-infrared camera motion analysis system with two forceplates. Simultaneously, electromyography of the triceps surae muscles, and the fascicle length of the medial gastrocnemius were recorded using a real-time ultrasound imaging machine. Results : Comparing to gait, the kinematic and kinetic parameters of TJ and OJ were found to be significantly different. Along with those parameters, change in the medial gastrocnemius (MG) muscle-tendon complex (MTC) length ($50.57{\pm}6.20mm$ for TJ and $44.14{\pm}5.39mm$ for OJ) and changes in the fascicle length of the MG ($18.97{\pm}3.58mm$ for TJ and $20.31{\pm}4.59mm$ for OJ) were observed. Although the total excursion of the MTC and the MG fascicle length during the two types of jump were not significantly different, however the pattern of length changes were found to be different. For TJ, the fascicle length maintained isometric longer during the propulsive phase than OJ. Conclusion : One-legged and two-legged vertical jumping use different muscle-tendon interaction strategies.

MnO2가 도핑된 무연 High Tc (>165℃) BaTiO3-(Bi0.5Na0.5)TiO3 세라믹의 PTCR 특성 향상 (Enhancement of PTCR Characteristics of MnO2 Doped Lead Free BaTiO3-(Bi0.5Na0.5)TiO3 Ceramics with High Tc (>165℃))

  • 김경범;장용호;김창일;정영훈;이영진;백종후;이우영;김대준
    • 한국전기전자재료학회논문지
    • /
    • 제24권9호
    • /
    • pp.723-727
    • /
    • 2011
  • 0.935Ba$TiO_3$-0.065($Bi_{0.5}Na_{0.5}$)$TiO_3+xmol%MnO_2$ (BBNTM-x) ceramics with $0{\leq}x{\leq}0.05$ were fabricated with muffled sintering by a modified synthesis process. Their microstructure and enhanced positive temperature coefficient of resistivity (PTCR) characteristics were systematically investigated in order to obtain lead-free high TC PTCR thermistors. All specimens showed a perovskite structure with a tetragonal symmetry and no secondary phase was observed. Grain growth was achieved when the doped MnO2 was increased above 0.02 mol%. This is due to the effect of positive Mn ion doping as an acceptor compensating a Ba vacancy occurred by the higher donor dopant concentration of $Bi^{3+}$ ion. Especially, enhanced PTCR characteristics of the extremely low ${\rho}_{RT}$ of $9\;{\Omega}{\cdot}cm$, PTCR jump of $5.1{\times}10^3$, ${\alpha}$ of 15.5%/$^{\circ}C$ and high $T_C$ of $167^{\circ}C$ were achieved for the BBNTM-0.04 ceramics.

SPH을 활용한 3차원 비선형 파랑모형 개발 (Development of 3-D Nonlinear Wave Driver Using SPH)

  • 조용준;김권수
    • 대한토목학회논문집
    • /
    • 제28권5B호
    • /
    • pp.559-573
    • /
    • 2008
  • Navier-Stokes식, Gaussian 분포형 용출함수를 이용한 내부조파, energy absorbing layer로 삼차원 파랑모형을 새롭게 구성하였다. Navier-Stokes식의 수치적분에는 정교한 수치기법인 SPH(Smoothed Particle Hydrodynamics)가 활용된다. 제안된 파랑모형의 검증은 삼차원 포물형 용기에서의 sloshing현상과 Thacker(1981)의 해석해를 토대로 수행되었다. 초기 수면 형상이 Gaussian hump인 경우와 일방향으로 경사진 경우에 대해 수치모의 하였다. 수치모의 결과 수면이 융기되도록 구속한 외부조건이 해제되면서 시작되는 자유진동의 정성적 거동은 비교적 정확히 모의되었으나 시간이 경과될수록 위상차, 침수선이 퇴각하는 등 초기 수면과는 상당히 다른 결과를 보였다. 최종적인 검증은 쐐기모양 해안에서의 비선형 천수, 굴절거동의 수치모의를 토대로 진행되었다. 수치모의 결과 굴절되는 양이 Hamiltonian ray theory가 제공하는 수치보다 전반적으로 작게 나타났다. 이러한 현상은 이상유체와 선형 이론에 기초한 Hamiltonian ray theory에서 간과된 비선형성, 점성으로 인한 양안과 저면에서의 에너지 감쇄, 쇄파 과정에 유동계에 도입되는 에너지 감쇄, 선행파랑에 의한 down-rush와 조우시 발생하는 도수 등에 기인하는 것으로 판단된다.