• 제목/요약/키워드: phase error

검색결과 1,992건 처리시간 0.024초

토크분배함수를 이용한 SRM의 적접토크제어기법 (Direct Torque Control Scheme of Switched Reluctance Motor using Novel Torque Sharing Function)

  • 안진우;이동희;김태형
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.138-140
    • /
    • 2007
  • A novel non-linear logical torque sharing function (TSF) is presented. To improve efficiency and to reduce torque ripple in commutation region, only a phase torque under commutation is regulated to produce a uniform torque. And the torque developed by the other phase remains with the previous state under a current limit of the motor and drive. If the minimum change of a phase torque reference can not satisfy the total reference torque, two-phase changing mode is used. Since a phase torque is constant and the other phase torque is changed at each rotor position, total torque error can be reduced within a phase torque error limit. And the total torque error is dependent on the change of phase torque. To consider non-linear torque characteristics and to suppress a tail current at the end of commutation region, the incoming phase current is changed to torque increasing direction, but the outgoing phase current is changed to torque decreasing direction. So, the torque sharing of the outgoing phase and incoming phase can be smoothly changed with a minimum current cross over. The proposed control scheme is verified by some computer simulations and experimental results.

  • PDF

고차 QAM에 적합한 위상 미분을 이용한 주파수 오차 보정 회로 (A Frequency Offset Compensation Technique for the High Order QAM using a Phase Differential Equation)

  • 박상열;윤태일;조경록
    • 대한전자공학회논문지TC
    • /
    • 제41권10호
    • /
    • pp.27-33
    • /
    • 2004
  • 본 논문에서는 극성 결정 반송파 복원 알고리즘을 이용하여 고차 QAM에서 효율적으로 위상 및 주파수 오차를 보정하는 회로를 제안하였다. 제안된 회로는 전체적으로 디지털 동작을 하며 위상오차와 주파수 오차를 동시에 보정한다. 제안된 방법은 성상도상에서 회전하는 심볼의 각 속도에서 주파수 오차를 찾아내 역회전 시킨다. 제안된 회로는 입력된 신호의 구간평균을 취하여 가산성 백색 잡음 채널 환경 하에 효율적으로 대처하는 구조를 가지며 I와 Q축 하나의 정보만으로 위상 정보를 추정하여 하드웨어를 간소화 하였다. 회로설계 검증결과 ±35도의 위상오차와 0.25의 일반화된 주파수오차에서 보정을 하는 성능을 보였으며 15dB의 AWGN 환경 하에서도 높은 수렴 성능을 나타내었다.

OFDM 및 SC-CP 시스템에 대한 결정지향 방식의 평균위상에러 정정 (Correction of Mean Phase Error for OFDM and SC-CP Systems using Decision-Directed Method)

  • 김지헌;김환우
    • 대한전자공학회논문지TC
    • /
    • 제42권12호
    • /
    • pp.77-84
    • /
    • 2005
  • OFDM(Orthogonal Frequency Division Multiplexing) 및 SC-CP(Single Carrier with Cyclic Prefix) 방식은 문선 분야에서 각기 각광받고 있으며, 두 방식 모두 주파수 영역에서 효율적인 등화를 수행할 수 있는 장점을 지니고 있다. 무선 채널의 도플러 쉬프트 현상이 수반되는 경우 등화기만으로 온전히 왜곡 보상이 여의치 않을 수 있으며, 이에 따라 위상에러 추적회로와 등화기를 연동시켜 성능 향상을 도모할 수 있다. 본 논문에서는 평균위상에러의 효과를 기술하였고, 결정지향 방식의 평균위상 에러 추적회로와 proportional 등화기를 연동한 성능을 설계하였다. 아울러 시뮬레이션 결과를 통해 시스템의 성능 저하를 최소화하면서 추적회로의 연산 부담을 줄일 수 있음을 제시하였다.

Digital Control of a Single-Phase UPS Inverter for Robust AC-Voltage Tracking

  • Woo Young-Tae;Kim Young-Chol
    • International Journal of Control, Automation, and Systems
    • /
    • 제3권4호
    • /
    • pp.620-630
    • /
    • 2005
  • This paper presents a digital controller for a single phase UPS inverter under two main considerations: (i) the overall system shall keep very low AC-voltage tracking error as well as no phase delay over different load conditions, and (ii) the digital controller shall be employed at a fixed sampling time. We propose that the former can be achieved by the proposed controller using the error-state approach and the latter can be dealt with by the socalled characteristics ration assignment.

Analysis of Optical Transfer Function and Phase Error of the Modified Triangular Interferometer

  • 김수길;염정덕
    • 조명전기설비학회논문지
    • /
    • 제21권1호
    • /
    • pp.10-18
    • /
    • 2007
  • We synthesize and analyze the optical transfer function(OTF) of the modified triangular interferometer(MTI) using two-pupil synthesis method and we present the optimal MTI, which can obtain any bipolar function by combining a wave plate and a linear polarizer. Also, we analyze its potential phase error sources caused by polarization components.

위상천이법을 이용한 삼차원 형상측정에서 위상오차 보정 (Phase error compensation for three-dimensional shape measurement based on a phase-shifting method)

  • 박윤창;안성준;강문호;권영철;안승준
    • 한국산학기술학회논문지
    • /
    • 제10권11호
    • /
    • pp.3023-3030
    • /
    • 2009
  • 고속 삼차원 형상측정에서는 충분한 위상이송 스텝 수를 적용할 시간을 확보할 수 없기 때문에, 스텝 수를 축소하게 되면서 위상측정에서의 잡음이 증가되게 된다. 본 논문에서는, 다파장 PMP법에 있어서 두 파장의 비례관계를 이용하여 측정된 위상에 포함되어 있는 위상오차를 예측하고, 이를 보정하는 방법을 제안하였으며, 제안된 보정방법의 효용성을 확인하기 위한 실험이 진행되었다. 위상천이법에서 통상적으로 사용되는 스텝 수에 비해 월등히 많은 스텝의 위상 이송으로 측정하였으며, 또한 동일한 대상물을 고속 삼차원측정에서 적용되는 3-3 step의 위상 이송으로 측정하여, 두 경우에서의 측정결과를 비교하여 고속측정에서의 측정잡음을 산출하였다. 그리고, 본 논문에서 제안하고 있는 보정 방법을 측정된 맥놀이 위상과 절대위상에 적용한 결과, 각각에 있어서 90%와 17.2%의 잡음감소가 이루어지는 것으로 확인되었다.

파장판를 이용한 스펙클패턴 전단간섭법에 있어서의 위상오차 해석 (Phase Error Analysis in Shearography Using Wave Plates)

  • 김수길
    • 조명전기설비학회논문지
    • /
    • 제19권1호
    • /
    • pp.34-39
    • /
    • 2005
  • 본 논문에서는 Wollaston 프리즘을 이용한 스펙클패턴 전단간섭법(shearography)에서 수동소자인 두 개의 파장판과 편광판의 조합을 통해 각각 90도의 위상천이를 가지는 4개의 스펙클 패턴을 얻고, 이로부터 스펙클패턴의 각 지점에서의 위상을 얻을 수 있는 방법을 제시하였다. 제안된 방법에 사용되는 파장판에 의한 위상오차를 Jones 행렬을 이용하여 분석하였다.

Wollaston prism을 이용한 스펙클패턴 전단간섭법에 있어서 파장판의 방위각에 의한 위상오차 해석 (Analysis of Phase Error Due to the Azimuth Angle of the Wave Plates in the Shearography Using Wollaston Prism)

  • 김수길;김기수;고명숙
    • 조명전기설비학회논문지
    • /
    • 제19권8호
    • /
    • pp.1-7
    • /
    • 2005
  • 본 논문에서는 편광소자를 이용하는 스펙클패턴 전단간섭법(shearography)에서 각각 90도의 위상천이를 가지는 4개의 스펙클 패턴을 얻고, 이로부터 스펙클패턴의 각 지점에서의 위상을 얻을 수 있는 방법을 설명하고, 제안된 방법에 사용되는 파장판의 방위각에 의한 위상오차를 Jones 행렬을 이용하여 분석하였다.

2상 유도전동기용 벡터제어 인버터를 위한 전류측정 오차 보상 방법 (Compensation Method of Current Measurement Error for Vector-Controlled Inverter of 2-Phase Induction Motor)

  • 이호준;윤덕용
    • 전기학회논문지
    • /
    • 제65권7호
    • /
    • pp.1204-1210
    • /
    • 2016
  • The phase currents must be accurately measured to achieve the instantaneous torque control of AC motors. In general, those are measured using the current sensors. However, the measured current signals can include the offset errors and scaling errors by several components such as current sensors, analog amplifiers, noise filter circuits, and analog-to-digital converters. Therefore, the torque-controlled performance can be deteriorated by the current measurement errors. In this paper we have analyzed the influence caused by vector control of 2-phase induction motor when two errors are included in measured phase currents. Based on analyzed results, the compensation method is proposed without additional hardware. The proposed compensation method was applied vector-controlled inverter for 2-phase induction motor of 360[W] class and verified through computer simulations and experiments.

주파수선택성 페이딩전송로에서 스텝형 위상을 갖는 $\pi$/4-DQPSK의 비트오율 (Bit Error Probability of $\pi$/4-DQPSK with Stepped Phase over a Frequency Selective Fading Channel)

  • 이철성;이재홍
    • 전자공학회논문지A
    • /
    • 제32A권9호
    • /
    • pp.1177-1183
    • /
    • 1995
  • This paper proposes a new modulation scheme of $\pi$/4-DQPSK with stepped phase for a frequency selective fading channel. In the proposed modulation scheme, the phase of transmitted signal is shifted in the mid of a symbol duration in order to reduce the effect of multipath delay spread. It reduces the irreducible error of $\pi$/4-DQPSK over a frequency selective fading channel. It is shown that $\pi$/4-DQPSK with stepped phase achieves smaller average bit error probability than regular $\pi$/4- DQPSK by simulation. The former achieves much smaller average bit error probability than the latter for small TEX>${\tau}/T_{s}$.

  • PDF