• Bulletin of the Korean Chemical Society
• /
• 제12권5호
• /
• pp.490-494
• /
• 1991

The ${\beta} to {\alpha}$ phase transition in silver iodide is studied with the (N, V, E) and (N, P, T) molecular dynamics (MD) method. In experiments, the phase transition temperature is 420 K. Upon heating of ${\beta}$ form, the iodine ions undergo hcp to bcc transformation and silver ions become mobile. MD simulations for the ${\beta}$ and ${\alpha}$ phases are carried out at several temperatures and the radial distribution functions (rdf) are obtained at those temperatures in the (N, V, E) ensemble. But the phase transition is not found in our calculation. Next the phase transition is studied with the (N, P, T) MD and we find some evidences of phase transition. At 3 Kbars and 2 Kbars the phase transition temperatu re is about 300 K. For 3.55 Kbars, the phase transition is higher (420 K) than the low pressure case. The phase transition temperature is somewhat dependent on the pressure in our calculations.

• Corrosion Science and Technology
• /
• 제23권3호
• /
• pp.246-254
• /
• 2024

Recently, coal-fired power plants are experiencing many problems that they have never experienced before due to an increase in flexible operation. In particular, a two-phase flow accelerated corrosion on water wall tubes in a boiler has not been detected overseas or domestically. There is no response plan to deal with such corrosion problem either. However, oxide film damage and tube material corrosion due to a two-phase flow accelerated corrosion are being discovered on water wall boiler tubes of domestic coal-fired power plants recently. If this situation is severe, it can cause enormous damage such as tube rupture. Therefore, in this paper, in order to prepare a response plan for a two-phase flow accelerated corrosion on water wall tubes in the future, differences between a two-phase flow accelerated corrosion and a single-phase flow accelerated corrosion were investigated and an example of discovery of a two-phase flow accelerated corrosion on water wall tubes was presented.

• 대한한방내과학회지
• /
• 제39권4호
• /
• pp.463-470
• /
• 2018

Objectives: The aim of this study was to identify the validity of phase angle as a prognostic factor for survival in patients with metastatic cancer. Methods: Data of patients with metastatic cancer who visited the Korean medicine cancer center at Kyung Hee University Hospital in Gangdong from April 2016 to February 2018 were collected for this study. The values of phase angle (PhA) and blood hemoglobin (Hb), C-reactive protein (CRP), and serum albumin levels were also investigated by bioelectrical impedance analysis (BIA). Results: In total, 86 patients were analyzed. The cut-off value of the phase angle was determined as 5.0. Univariate and multivariate analysis revealed that phase angle (HR 3.15, 95% CI 1.79-5.54) and CRP (HR 2.15, 95% CI 1.24-3.73) predicted survival with statistical significance. The median overall survival of the low PhA group ($PhA{\leq}5.0$) was 1.8 months (95% CI 0.6-2.9 months) and 7.2 months (95% CI 5.2-9.2 months) in the high PhA group (PhA>5.0)(p<0.001). Conclusions: The phase angle could be an independent prognostic factor for patients with metastatic cancer. Further research is required to confirm these findings and their correlation with other indexes.

• Korean Journal of Acupuncture
• /
• 제32권2호
• /
• pp.66-74
• /
• 2015

Background : Saam acupuncture were composed by applying the elemental concepts from the Five Phase theory - the relationships between the cycles such as Saeng(Sheng, 'nourishing' or 'creating') and Geuk(Ke, 'suppressing' or 'controlling') - onto the Five Phase points and 12 channels to compensate for the imbalance in each of the 12 main energy traits. Objective : The present study is aimed to find out the characteristics of Five Phase points pattern in Saam acupuncture. Methods : We analysed the characteristics of five elements of the Five Phase points in Korean medical texts such as Saamdoinchimguyogyeol, Dongeuibogam and Chimgugyeongheombang in mid Chosun Dynasty. Using non-negative factorization(NNMF) methods, we extracted the feature matrix of five elements of Five Phase points in each classic medical text. Results : In Saam acupuncture, two characteristics were most prominent: (1) "Self" component of Five elements, (2) "Mother" and "Grandmother" component of Five elements. Conclusions : Saam acupuncture used the combination of Five-Shu acupoint based on ZangFu pattern identification. Our findings suggest that grasping the characteristics of Five Phase points combinations can improve the understanding the selection of the relevant acupoints based on the ZangFu pattern identifications.

• 한국방사선학회논문지
• /
• 제3권2호
• /
• pp.23-26
• /
• 2009

본 연구는 향상된 중심배열 정렬 위상 펼침 방법(ICASPL)을 제안하고 자기공명 위상 영상을 재구성하여 성능을 평가하였다. 제안된 방법을 수행하기 위해 2% 한천젤에 0.6mM/l를 첨가한 팬텀을 제작하여 임상용젠작하5T 자기공명영상와젠상용화된 무릎코일을 이용하여 MR위상영상을 얻었다. 획득된 k 공간 자료는 PC로 옮긴 뒤 매트랩 프로그램을 이용하여 영상을 재구성하였다. 제안된 ICASPU의 오차를 2차 회귀분석읕 이용하여 기존의 중심배열 정렬 위상 펼침과 비교 평가하였다. 그 결과 기존의 ICASPU방법에 비해 제안된 ICASPU방법이 5배 정도 오차가 향상된 것을 확인할 수 있었다. 본 연구는 향상된 중심배열 정렬 위상 펼침 방법을 이용한 위상영상 펼침의 유용성을 확인하였으며, 향후 위상 정보를 포함한 영상 적용에 매우 유용할 것이라 기대된다.

• 멤브레인
• /
• 제28권3호
• /
• pp.187-195
• /
• 2018

본 연구에서는 상전이법을 이용하여 P(VDF-co-HFP) 분리막의 구조를 조절하였다. Macrovoid 없는 구조를 얻기 위하여 다양한 조건에서 비용매유도상전이(NIPS) 공법으로 분리막을 제막하였으나 고분자의 낮은 결정화 속도로 인해 macrovoid가 생성된다는 것을 관측하였다. 이를 극복하기 위해 증발유도상전이법(EIPS)과 증기유도상전이법(VIPS)을 도입하였으며 NIPS공법과 함께 제막되었을 때 이상적인 구조를 얻을 수 있다는 것을 확인하였다.

• 한국분말재료학회지
• /
• 제18권3호
• /
• pp.244-249
• /
• 2011

Spherical nanosized cobalt powder with an average size of 150-400 nm was successfully prepared at room temperature from cobalt sulfate heptahydrate ($CoSO_4{\cdot}7H_2O$). Wet chemical reduction method was adopted to synthesize nano cobalt powder and hypophosphorous acid ($H_3PO_2$) was used as reduction agent. Both the HCP and the FCC Co phase were developed while $CoSO_4{\cdot}7H_2O$ concentration ranged from 0.7 M to 1.1 M. Secondary phase such as $Co(OH)_2$ and $CO_3O_4$ were also observed. Peaks for the crystalline Co phase having HCP and FCC structure crystallized as increasing the concentration of $H_3PO_2$, indicating that the amount of reduction agent was enough to reduce $Co(OH)_2$. Consequently, a homogeneous Co phase could be developed without second phase when the $H_3PO_2/CoSO_4{\cdot}7H_2O$ ratio exceeded 7.

• Journal of Magnetics
• /
• 제16권2호
• /
• pp.173-176
• /
• 2011

Fe-Cr alloys with different Cr contents were prepared by an arc melting technique. The alloys were isochronally aged in the range from $400^{\circ}C$ to $900^{\circ}C$ with $50^{\circ}C$ steps with a holding time of 100 hours. The ageing produced embrittlement in the alloys due to either the formation of a Cr-rich ${\alpha}'$ phase or a $\sigma$ phase at high temperatures. Magnetic Hysteresis Loop (MHL) and Micro-Vickers hardness were measured at each step to correlate the magnetic and mechanical properties. Coercivity and hardness of the alloys were increased and remanence decreased up to 500-$550^{\circ}C$ due to formation of a Cr-rich ${\alpha}'$ phase. Beyond 500-$550^{\circ}C$ range, the coercivity and hardness decreased and remanence increased due to the coarsening or dissolution of the Cr-rich ${\alpha}'$ phase. In the Fe-48% Cr alloy, formation of the $\sigma$ phase at $700^{\circ}C$ reduced the maximum induction of the alloy significantly.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.267-271
• /
• 1997

In this study, swing phase dynamic simulation of above-knee prosthesis is performed. The prosthesis consists of a single axis knee mechanism and pneumatic cylinder. The numerical modelling of the prosthesis is analyzed in two dimensions. The governing equation of thermodynamical pneumatic cylinder model is applied to construct the control of lower limb during swing phase. Knee flexion angle with respect to the orifice diameter of the pneumatic cylinder is produced. This analysis will be very useful to the design of pneumatic cylinder in prosthesis.

• 한국전자파학회논문지
• /
• 제22권9호
• /
• pp.847-851
• /
• 2011

본 논문에서는 입력 신호의 진폭과 위상을 미세 조정할 수 있는 새로운 IQ 변조기를 제안하였다. 제안된 IQ 변조기는 저위상 편차 감쇠기, 분배기, 그리고 결합기로 구성되어 있다. 기존 감쇠기의 위상 편차 특성을 극복하기 위한 새로운 위상 보상 기술을 사용하였고, 이를 수식적으로 분석하였다. 제안하는 IQ 변조기를 통하여 완전한 $360^{\circ}$의 위상 조정과 동시에 입력 신호의 큰 진폭 조정이 가능하며, 극좌표계의 중심점을 지나는 선형적인 IQ신호 배열을 구현하였다.