• Applied Chemistry for Engineering
• /
• v.34 no.5
• /
• pp.472-478
• /
• 2023

The usage of jet fuel has been increasing with increasing passenger and logistics movements under globalization. CO₂, which is the main global warming gas from aircraft, was charged about 3.5% of total global CO₂ emissions and 12% of transportation fuel emissions. For these reasons, a lot of governments and the international civil aviation organization (ICAO) are trying to reduce CO₂ emissions via the introduction of bio-jet fuel. In this paper, we showed the jet fuel properties, specifications, and presentative production methods of bio-jet fuel such as alcohol to jet (ATJ), oil to jet (OTJ), gas to jet (GTJ) and sugar to jet (STJ). Also, we described the status of global and domestic bio-jet fuel usage and the policy plan for efficient distribution.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.3
• /
• pp.165-170
• /
• 2022

If petroleum- derived plastic like a bio-based plastic was degradation, awareness like a global warming and environmental disasters will be decreased. Plastic film was produced by adding ferric ions according to concentration by using a pro-oxidant in polyolefin resin. Changes in tensile strength, elongation, and molecular weight were evaluated according to the UV irradiation time. Increasing the amount of ferric ions resulted in more significant declines of physical properties, and also resulted in greater changes in molecular weight. After 100 hours of UV irradiation, tensile strength declined significantly in the film containing pro-oxidant as compared to the control. A similar effect was also observed in terms of elongation. The film containing pro-oxidant showed a 73.8% decrease in molecular weight after 100 hours of UV irradiation. The appropriate use of pro-oxidant can not only degrade plastic film but also control the time of degradation at the petroleum-derived plastic films. Further studies are necessary to investigate the conditions of plastic film degradation.

• Journal of Navigation and Port Research
• /
• v.43 no.6
• /
• pp.462-468
• /
• 2019

Offshore oil production faces several difficulties caused by oil price decline and unexpected changes in the global petroleum logistics. This paper suggests a stochastic model for optimizing the offshore oil production under uncertainty. The proposed model incorporates robust optimization and restricted recourse framework, and uses the lower partial mean as the measure of variability of the recourse profit. Some computational experiments and results based on the proposed model using scenario-based data on the crude oil price and demand under uncertainty are examined and presented. This study would be meaningful in decision-making for the offshore oil production problem considering risks under uncertainty.

• Journal of Korea Port Economic Association
• /
• v.25 no.1
• /
• pp.63-86
• /
• 2009

With increasing uncertainty of energy market in the world, the policies for the energy resource security have become crucial Several countries with poor energy resource like Netherlands and Singapore have pursued the policy for becoming an oil hub in the region. Singapore has been an oil hub in East Asia for a long time not only because it is well located with a large number of countries exporting and importing oil but it has also pursued strong policies to become an oil hub while establishing favourable institutional, regulatory and business environment for accommodating major refineries and petro-chemical companies. However with growing trading volume of petroleum products in Northeast Asia and a record high price of oil in these days, the necessities of another oil hub in the region are considered in order to reap benefits of the security of economical and stable oil. South Korea is situated astride the main North Pacific shipping route, with deep water ports and proximity to Chinese and Japanese industrial centres that make tank terminal operators Ideal choices for the oil hub in Northeast Asia although it has several disadvantages such as lack of independent storage facilities, underdeveloped oil trading market and unfavourable business friendly climates etc. This study is focused on examining the globalization strategies of tank terminal operators such as Vopak, Oiltanking and Odfjell in order to suggest the policy implications for becoming an oil tub in Northeast Asia.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.30 no.1
• /
• pp.63-72
• /
• 2024

Poly (butylene adipate-co-terephthalate) (PBAT) is one of the representative biodegradable polymers with high ductility and processability to replace petroleum-based polymers. Many investigations have been conducted to broaden the applications of PBAT in a variety of industries, including the food packaging, agricultural mulching film, and logistics and distribution fields. Foaming process is widely known technique to generate the cell structure within the polymer matrix, offering the insulation and light weight properties. However, there was no commercially feasible foam product based on biodegradable polymers, especially PBAT, and maintaining a proper melt viscosity of the polymer would be a key parameter for the foaming process. In this study, chemical foaming agent and cross-linking agent were introduced to PBAT, and a compression molding process was applied to prepare a foam sheet. The correlation between cell morphological structures and mechanical and physical properties was evaluated. It was found that PBAT with foam structures effectively reduced the density and thermal conductivity, allowing them to be suitable for applications such as insulation and lightweight packaging or cushion materials.

• Journal of the Korean Society of International Agriculture
• /
• v.30 no.4
• /
• pp.328-338
• /
• 2018

Central Asia (Uzbekistan, Kazakhstan, Kyrgyzstan) is a hot and arid continental climate, with most areas (68%) consisting of barren vegetation, desert, and meadows. The main agricultural areas for crop production include irrigated farmland, non-irrigated farmland, grassland, prairie and mountain. We are experiencing climate change with recent climate variability increasing. Agriculture is one of major economic sectors and provides a means of livings for the rural population of Central Asia, especially the poor. In the past two decades, Central Asia has experienced a high population growth rate, with Kazakhstan at 16.8%, Uzbekistan at 34.5% and Kyrgyzstan at 28.4%. As a major industry, Kazakhstan has the largest share of exports of agricultural products followed by petroleum, mineral resources, steel, and chemicals. Uzbekistan is the fifth largest cotton exporter as well as the sixth largest cotton producer in the world. Kyrgyzstan exports ores, stones, cultured pearls, and minerals. These three countries are rich in mineral resources, agricultural products, and energy resources. However, not only do they have difficulties in economic development due to the weakness of logistics and industrial infrastructure, but they also have imperceptible cooperation and investment among countries due to insufficient research and development. Through this study, we will investigate national outlook, economic indicators, major agricultural products, import and export status, and agricultural technology cooperation status, and study how Korean agricultural industry advances into these countries through SWOT analysis. Through this, we hope to contribute to the basic data of Central Asian studies and cooperation and investment in agriculture in each country. In addition, in order to increase cooperative exchange and investment in these countries, we will prepare a Central Asia logistics hub for the rapidly changing interKorean railroad era.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.3
• /
• pp.153-161
• /
• 2023

The worldwide effects of COVID-19 have led to a surge in online shopping and contactless services. The consumption pattern has caused the issues such as the environmental pollution together with the increase of plastic waste. Reducing the reliance on the petroleum based plastic use for the package and replacing it with environmentally friendly material are the simple ways in order to solve those problems. Paper is an eco-friendly product with high recyclability as the food packaging materials but has still poor barrier properties. A barrier coating on surface of the paper can be achieved with the proper packaging materials featuring water, gas and grease barrier. Polyethylene (PE) or polypropylene (PP) coatings which are generally laminated or coated to paper are widely used in food packaging applications to protect products from moisture and provide water or grease resistance. However, recycling of packaging containing PE or PP matrix is limited and costly because those films are difficult to degrade in the environment. This study investigated the recyclability of modified acrylic emulsion coating papers compared to PE and PP polymer matrixes as well as their mechanical and gas barrier properties. The results showed that PE or modified acrylic emulsion coated papers had better mechanical properties compared to the uncoated paper as a control. PE or PP coating papers showed strong oil resistance property, achieving a kit rating of 12. Those papers also had a significantly higher percentage of screen reject during the recycling process than modified acrylic coated paper which had a screen rejection rate of 6.25%. In addition an uncoated paper had similar value of a screen rejection rate. It may suggest that modified acrylic emulsion coating paper can be more easily recycled than PE or PP coating papers. The overall results of the study found that modified acrylic emulsion coating paper would be a viable alternative to suggest a possible solution to an environmental problem as well as enhancing the weak mechanical and poor gas barrier properties of the paper against moisture.