• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.7
• /
• pp.463-468
• /
• 2017

For transdermal drug delivery, needless injection system is composed of laser and microjet injector. Main mechanism of microjet injector is the laser-induced bubble. Nd:YAG and Er:YAG laser are used as a power source. Laser parameters such as pulse duration and wavelength are considered, which are core parameters to control the bubble motion. The Nd:YAG laser, pulse duration is short than bubble life time making cavitation like bubble while in Er:YAG laser, long pulse duration and high absorption in water drive bubble as a boiling bubble. Detailed motion of bubble and microjet is captured by the high speed camera. So it is observed that microjet characteristics are determined by the bubble behavior. The performance of drug delivery system is evaluated by fluorescent staining of guinea pig skin.

• Membrane and Water Treatment
• /
• v.7 no.5
• /
• pp.417-431
• /
• 2016

Poly(vinylidene fluoride) (PVDF) powder was treated with aqueous sodium hydroxide to obtain partially defluorinated fluoropolymers with expected properties such as improving hydrophilicity and fouling resistance. Raman spectrum and FT-IR results confirmed the existence of conjugated carbon double bonds after alkaline treatment. As the concentration increased, the degree of defluorination increased. The morphology and structure of membranes were examined. The permeation performance was investigated. The results showed that membrane's hydrophilicity increased with increase of the percentage of alkaline treated PVDF powder. Moreover, in terms of the water contact angle, it decreased from $92^{\circ}$ to a minimum of $68^{\circ}$; while water up take increased from 128 to 138%. Fluxof pure water and the cleaning efficiency increased with the increase of alkaline treated PVDF powder. The fouling potential also decreased with the increase of the percentage of alkaline treated PVDF powder. The reason that makes blending PVDF show different characteristics because of partial defluorination, which led the formation of conjugated C = C bonds and the inclusion of oxygen functionalities. The polyene structure followed by hydroxide attack to yield hydroxyl and carbonyl groups. Therefore, the hydrophilicity of blending membrane was improved. The SEM and porosity measurements showed that no obvious variations of the pore dimensions and structures for blend membranes were observed. Mechanical tests suggest that the high content of the alkaline treated PVDF result in membranes with less tolerance of tensile stress and higher brittleness. TGA results exhibited that the blend of alkaline treated PVDF did not change membrane thermal stability.

• Membrane Journal
• /
• v.13 no.4
• /
• pp.291-299
• /
• 2003

Polymer membranes such as poly(1-trimethylsilyl-1-propyne)-polyetherimide (PTMSP-PEI) and poly(dimethylsiloxane)- polyetherimide (PDMS-PEI) composite membrane were prepared by solution casting method. To investigate the characteristics of these membranes, the analytical methods such as FT-IR, $^1H-NMR,$ DSC, TGA, GPC, and SEM have been utilized. The number-average (equation omitted) and weight-average (equation omitted) molecular weight of PTMSP were 477,920 and 673,329 respectively. The glass transition temperature ($T_g$) of PTMSP was $224^{\circ}C.$ The separation of the gas mixture ($H_2/N_2$) through the composite membranes were studied as a function of pressure. The separation factor (${\alpha}, {\beta},$ quation omitted) of the composite membranes used in this work increased as the pressure of permeation cell increased. The real separation factor (${\alpha}$), head separation factor (${\beta}$), and tail separation factor (equation omitted) of PTMSP-PEI composite membrane were 2.28, 1.17, and 1.96 respectively at ${\Delta}P$ 30psi and $25^{\circ}C.$ (${\alpha}, {\beta}$ and equation omitted of PDMS-PEI composite membrane were 3.70, 1.53, and 2.42 respectively at ${\Delta}P$ 30psi and $25^{\circ}C$.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.521-528
• /
• 2008

The micro-porous asymmetric PVDF hollow fiber membranes for gas-liquid contactor were prepared by the dry-jet wet phase inversion process and the characteristics of hollow fiber membranes were evaluated by the gas permeation method and scanning electron microscope. The chemical absorbent for removal of $SO_2$ gas was sodium hydroxide at bench scale hollow fiber membrane contactor. The experiments were performed in a counter-current mode of operation with gas in the shell side and liquid in the fiber lumen of the module to examine the effect of various operating variables such as concentration of absorbent, gas flow rate, L/G ratio and concentration of inlet $SO_2$ gas on the $SO_2$ removal efficiency using PVDF hollow fiber membrane contactor. Membrane mass transfer coefficient($k_m$) was calculated by mathematical modeling. The volumetric overall mass transfer coefficient increased with increasing the concentration of absorbent and L/G ratio. The increase of the absorbent concentration and L/G ratio not only provides more sufficient alkalinity but also decreases liquid phase resistance. The volumetric overall mass transfer coefficient increased with increasing gas flow rate due to decreasing the gas phase resistance.

• Applied Chemistry for Engineering
• /
• v.29 no.1
• /
• pp.67-76
• /
• 2018

In this study, PDMS-HNT and PDMS-mHNT composite membranes were prepared by the addition of halloysite nanotube (HNT) and modified HNT (mHNT) to PDMS. To investigate the physico-chemical characteristics of composite membranes, analytical methods such as FT-IR, XRD, TGA, and SEM were utilized. The gas permeability and selectivity properties of $N_2$ and $CO_2$ were evaluated. In particular, the PDMS-HNT with 10 wt% HNT and PDMS-mHNT with 5 wt% mHNT showed the highest $CO_2/N_2$ selectivity and $CO_2$ permeability at $35^{\circ}C$, respectively. Overall, PDMS-HNT and PDMS-mHNT composite membranes improved the $CO_2/N_2$ selectivity compared to that of using PDMS membrane.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.4
• /
• pp.1253-1259
• /
• 2012

The 14-3-3 proteins are highly conserved, ubiquitous molecules involved in a variety of biologic phenomena, such as cell cycle control, and apoptosis. However, their expression in cholangiocarcinoma has not been previously characterized. In this paper, immunohistochemistry using specific anti-14-3-3 monoclonal antibodies was performed on formalin-fixed;, paraffin embedded archival tissue from 86 patients of cholangiocarcinoma. We also examined the correlation between expression and survival rate and clinicopathologic factors such as tumor location, tumor size, pathologic differentiation, lymphatic permeation, lymph node metastasis, and tumor stage. Positive 14-3-3 proteins expression was observed for 6 isoforms (${\beta}$, ${\sigma}$, ${\gamma}$, ${\theta}$, ${\delta}$, ${\eta}$) of these proteins in 86 patients of cholangiocarcinoma. ${\beta}$ and ${\sigma}$ isoform immunoreactivity was correlated with lymph node metastasis, tumor stage and patients' survival rate. In addition, ${\delta}$ isoform immunoreactivity showed trends with tumor location, tumor size, pathologic differentiation and tumor stage, while the ${\theta}$ isoform was correlated with pathologic differentiation. These results indicated that upregulated expression of some isoforms of 14-3-3 may be a common mechanism for evading apoptosis in cholangiocarcinoma, so that targeting 14-3-3 may be a novel promising strategy for the treatment of this tumor.

• Journal of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.377-383
• /
• 1990

Three kinds of hydrogel membranes were prepared by the copolymerization of 2-hydroxyethylmethacrylate (HEMA) with acrylamide, N, N-dimethylamide and methylmethacrylate in the presence of solvent and crosslinker respectively. The equilibrium water content, relative permeability and partition coefficient of the membranes for alcohol solutes were measured. It has been found that the permeation of organic solute occurs through the water-filled regions in the hydrogel membrane, and that the gpermeability coefficient of organic solute depends on the molecular size. But the permeability of organic solute was controlled by the interaction of solute-membrane at the low water content. By the partition data, it has been shown that the partition of solute is only controlled by hydrophobic interaction between solute and membrane. The diffusion coefficient data were interpreted on the basis of water-solute interaction. It has been found that the diffusion of organic solute is determined by the free volume of water in the membrane, and that hardly depends on polarity-polarizability and hydrogen bonding ability between water and solute.

• Journal of the Korean Society of Tobacco Science
• /
• v.21 no.2
• /
• pp.160-170
• /
• 1999

Purification and biochemical experiments on the carboxylesterases-III (CE-III) from the indian meal moth, Plodia interpunctella (Hubner) were carried out to understand their enzymemological characteristics. The CE-III from the fifth instar larvae was purified by means of ammonium sulfate fractionation, gel permeation choromatography and ion exchange choromatography. The optimal temperature for the reaction of the CE-III on the 4 substrates ($\alpha$-Na, $\alpha$-Nb, $\beta$-Na and $\beta$-Nb) was confirmed at 4$0^{\circ}C$. The optimal pH for the reactions on the substrates $\alpha$-Na and $\alpha$-Nb was 7.5. But the optimal pH on the substrate $\beta$-Na and $\beta$-Nb was 8.0. The optimal substrate concentration for the reactions of the CE-III was 3.16 X 10$^{-3}$ M in $\alpha$-Na and $\beta$-Nb. On the substrate $\beta$-Na and $\alpha$-Nb, the optimal substrate concentration was 1.0 X 10$^{-3}$ M for CE-III. The $V_{max}$ and $K_{m}$ values of the carboxylesterases were varied by the substrates as followings: the $V_{max}$ of CE-III was 45.9 for $\alpha$-Na, 52.6 for $\beta$-Na, 36.4 for $\alpha$-Nb, and 83.3 ($\mu$ mol/min/mg protein) for $\beta$-Nb. The $K_{m}$ of CE-III was 1.43 X 10$^{-4}$ M for $\alpha$-Na, 3.57 x 10$^{-5}$ M for $\beta$-Na, 9.17 X 10$^{-5}$ M for $\alpha$-Nb, and 7.14 X 10$^{-5}$ M for $\beta$ -Nb, respectively. The CE-III seemed to have somewhat high thermostability considering that the temperature for effective denaturation on activity was about 5$0^{\circ}C$ ～ 6$0^{\circ}C$.EX>.EX>.

• Membrane and Water Treatment
• /
• v.8 no.1
• /
• pp.51-71
• /
• 2017

Antimicrobial polyethersulfone ultrafiltration membranes containing zerovalent iron ($Fe^0$) and magnetite ($Fe_3O_4$) nanoparticles were synthesized via phase inversion method using polyethersulfone (PES) as membrane material and nano-iron as nanoparticle materials. Zerovalent iron nanoparticles (nZVI) were prepared by the reduction of iron ions with borohydride applying an inert atmosphere by using $N_2$ gases. The magnetite nanoparticles (nMag) were prepared via co-precipitation method by adding a base to an aqueous mixture of $Fe^{3+}$ and $Fe^{2+}$ salts. The synthesized nanoparticles were characterized by scanning electron microscopy, X-ray powder diffraction, and dynamic light scattering analysis. Moreover, the properties of the synthesized membranes were characterized by scanning electron microscopy energy dispersive X-ray spectroscopy and atomic force microscopy. The PES membranes containing the nZVI or nMag were examined for antimicrobial characteristics. Moreover, amount of iron run away from the PES composite membranes during the dead-end filtration were tested. The results showed that the permeation flux of the composite membranes was higher than the pristine PES membrane. The membranes containing nano-iron showed good antibacterial activity against gram-negative bacteria (Escherichia coli). The composite membranes can be successfully used for the domestic wastewater filtration to reduce membrane biofouling.

• Microbiology and Biotechnology Letters
• /
• v.24 no.1
• /
• pp.50-58
• /
• 1996

Interspecific hybrids between Aspergillus oryzae var oryzae and A. nidulans 514 were obtained by nuclear transfer technique. Several autotrophic mutants isolated from conidiospores of the two strains were mutagenized with ultraviolet and N-methyl-N-nitrosoguanidine. Optimal conditions for formation of intergeneric hybrids were investigated. Frequencies of hybrid formation by nuclear transfer were $3{\times}10^{-5}{\sim}1{\times}10^{-5}$. From observation of genetic stability, conidial size, DNA content, and nuclear stain, it was suggested that their karyptypes are aneuploid. The hybrids showed 1.1~1.4 fold higher xylanase activities than parental strains did. The xylanase of Aspergiilus sp. TAVD514-3 was purified and some of it's enzymatc characteristics were investigated. The enzyme was purified about 85 fold with an overall yield of 17% from the culture medium by ammonium sulfate fractionation, Sephadex G-75 gel permeation chromatography, and CM-sephadex A-50 ion exchange chromatography. The purified enzyme functions optimally at pH 9.0 and 80$^{\circ}C$. The enzymatic activity was increased by the presence of $Mg^{2+}$ and $Mn^2$ ions.