• Title/Summary/Keyword: permeable

검색결과 1,045건 처리시간 0.027초

RGP콘택트렌즈 착용 시 나타날 수 있는 증상과 관련된 안경사의 교육에 관한 연구 (The study for the Education of Optometrists Related a Symptoms which can Show as Wearing RGP Contact Lens)

  • 주경복
    • 한국안광학회지
    • /
    • 제12권4호
    • /
    • pp.71-76
    • /
    • 2007
  • 본 연구의 목적은 RGP콘택트렌즈 착용 시 나타날 수 있는 증상에 관한 안경사의 이해도를 조사하는 것인데, RGP 콘택트렌즈 착용 시의 나타날 수 있는 증상에 대한 이해도가 높다면 적응증상과 이상증상을 구분하고 해결하여 RGP콘택트렌즈의 착용성공률을 보다 높여 줄 것이기 때문이다. 96명의 안경사를 대상으로 설문지를 통해 RGP콘택트렌즈 처방에 사용되는 기기 사용방법 및 경험, RGP콘택트렌즈 착용 시 나타날 수 있는 증상 등에 대한 이해수준을 조사하였다. 결과는 RGP콘택트렌즈 착용 시 증상에 대한 정확한 이해력이 상당히 낮은 수준으로 조사되었고, 정확한 처방을 위해 이론교육 및 실습교육 등이 더 강화되어야 한다.

  • PDF

Engineering Properties of Eco-Permeable Polymer Concretes Using Blast Furnace Slag Powder and Stone Dust

  • Park Phil Woo;Sung Chan Yong
    • 한국농공학회논문집
    • /
    • 제46권7호
    • /
    • pp.47-53
    • /
    • 2004
  • Permeable polymer concrete can be applied to roads, sidewalks, river embankments, drain pipes, conduits, retaining walls, yards, parking lots, plazas, interlocking blocks, etc. This study was to explore a possibility of using blast furnace slag powder and stone dust of industrial by-products as fillers for Eco-permeable polymer concrete. Different mix proportions were tried to find an optimum mix proportion of the Eco­permeable polymer concrete. The tests were carried out at $20{\pm}1^{circ}C$ and $60{\pm}2\%$ relative humidity. At 7 days of curing, unit weight, coefficient of permeability, dynamic modulus of elasticity, compressive, flexural and splitting tensile strengths ranged between $1,821{\~}1,955 kg/m^{3}$, $0.056{\~}0.081\;cm/s$, $114{\times}0^{2}{\~}157{\times}10^{2}\;MPa,\;17.6{\~}24.7\;MPa,\;5.98{\~}7.94\;MPa\;and\;3.43{\~}4.70\;MPa$, respectively. It was concluded that the blast furnace slag powder and stone dust can be used in the Eco-permeable polymer concrete.

폴리프로필렌섬유를 혼입한 포장용 투수성 폴리머 콘크리트의 공학적 성질 (Engineering Properties of Permeable Polymer Concrete for Pavement Using Polypropylene Fiber)

  • 성찬용;이승훈
    • 농업과학연구
    • /
    • 제37권2호
    • /
    • pp.277-283
    • /
    • 2010
  • Research on permeable pavement like asphalt and concrete pavement with porous structure has been increasing due to environmental and functional need such as reduction of run off and flood. This study was performed to evaluate void ratio, permeability coefficient, and compressive strength of permeable polymer concrete (PPC) using crushed and recycled coarse aggregate that is obtained from waste concrete. Also, 6 mm length of polypropylene fiber was used to increase toughness and interlocking between aggregate and aggregate surrounded by binder. Binder and filler used were unsaturated polyester resin and CaCO3, respectively. The mix proportions were determined to satisfy the requirement for the workability and slump according to aggregate sizes 5~10 mm. In the test results, regardless of kinds of aggregates and fiber contents, the void ratio, permeability coefficient and compressive strength of all types of PPC showed the higher than the criterion of porous concrete that is used in permeable pavement in Korea. Also, strengths of PPC with increase polypropylene fiber volume fraction showed slightly increased tendency due to increase binder with increase of fiber volume fraction. Accordingly, polypropylene fiber and recycled coarse aggregate can be used for permeable pavement.

TiO2를 치환율에 따른 투수블록의 흡착 특성 (Adsorption Properties of Permeable Block according to the Replacement Ratio of TiO2)

  • 이혜은;유재균;이상수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2021년도 봄 학술논문 발표대회
    • /
    • pp.74-75
    • /
    • 2021
  • In the recent 2017 annual average fine dust concentration (PM2.5) statistics released by the Organization for Economic Cooperation and Development (OECD), Korea has a high concentration of 25.14㎍/m3, which is about twice the average of 12.5㎍/m3 in OECD countries. Fine dust (PM2.5) is the main source of secondary pollutant production by the reaction of primary pollutants emitted from automobiles and thermal power plants, mainly composed of sulfates, nitrates, and organic carbon. The permeable block is an eco-friendly product that prevents rainwater from collecting on the surface of the road because it does not penetrate the groundwater properly, and is widely constructed on sidewalks or parking lots to recharge groundwater in case of rain. In addition, the pavement of the permeable block is a fundamental solution to reduce pollution by preventing rainwater from flowing into the stream, and it also has the advantage of easy replacement as well as low replacement costs. Therefore, this study was a basic experiment to produce permeable blocks mixed with TiO2 and diatomite to improve indoor air quality, and intended to analyze the flexural strength and compressive strength of permeable blocks mixed with TiO2.

  • PDF

SWMM 분석을 통한 투수성 포장의 유출 저감 특성 평가 (Performance Evaluation of the Runoff Reduction with Permeable Pavements using the SWMM Model)

  • 임무광;류성우;박대근;이재훈;조윤호
    • 한국도로학회논문집
    • /
    • 제17권4호
    • /
    • pp.11-18
    • /
    • 2015
  • PURPOSES: This study aims to evaluate the runoff reduction with permeable pavements using the SWMM analysis. METHODS: In this study, simulations were carried out using two different models, simple and complex, to evaluate the runoff reduction when an impermeable pavement is replaced with a permeable pavement. In the simple model, the target area for the analysis was grouped into four areas by the land use characteristics, using the statistical database. In the complex model, simulation was performed based on the data on the sewer and road network configuration of Yongsan-Gu Bogwang-Dong in Seoul, using the ArcGIS software. A scenario was created to investigate the hydro-performance of the permeable pavement based on the return period, runoff coefficient, and the area of permeable pavement that could be laid within one hour after rainfall. RESULTS : The simple modeling analysis results showed that, when an impervious pavement is replaced with a permeable pavement, the peak discharge reduced from $16.7m^3/s$ to $10.4m^3/s$. This represents a reduction of approximately 37.6%. The peak discharge from the whole basin showed a reduction of approximately 11.0%, and the quantity decreased from $52.9m^3/s$ to $47.2m^3/s$. The total flowoff reduced from $43,261m^3$ to $38,551m^3$, i.e., by approximately 10.9%. In the complex model, performed using the ArcGIS interpretation with fewer permeable pavements applicable, the return period and the runoff coefficient increased, and the total flowoff and peak discharge also increased. When the return period was set to 20 years, and a runoff coefficient of 0.05 was applied to all the roads, the total outflow reduced by $5195.7m^3$, and the ratio reduced to 11.7%. When the return period was increased from 20 years to 30 and 100 years, the total outflow reduction decreased from 11.7% to 8.0% and 5.1%, respectively. When a runoff coefficient of 0.5 was applied to all the roads under the return period of 20 years, the total outflow reduction was 10.8%; when the return period was increased to 30 and 100 years, the total outflow reduction decreased to 6.5% and 2.9%, respectively. However, unlike in the simple model, for all the cases in the complex model, the peak discharge reductions were less than 1%. CONCLUSIONS : Being one of the techniques for water circulation and runoff reduction, a high reduction for the small return period rainfall event of penetration was obtained by applying permeable pavements instead of impermeable pavement. With the SWMM analysis results, it was proved that changing to permeable pavement is one of the ways to effectively provide water circulation to various green infrastructure projects, and for stormwater management in urban watersheds.

에어로졸 시험장비를 이용한 방호 의복 소재의 여과 효율에 대한 연구 (The Experimental Study of SPM(Selectively Permeable Membrane Materials) by using Aerosol Test Instrument)

  • 권태근;서현관;김진원;강재성;강기태;안강호;최진수;조재호;권용택;박현배
    • 한국입자에어로졸학회지
    • /
    • 제10권3호
    • /
    • pp.109-117
    • /
    • 2014
  • In Korea, permeable protection clothes for chemical agent is being developed and distributed. But permeable protection clothes are vulnerable for biological agent of particle type. Therefore selective permeable membranes are being developed to protect chemical agent and biological agent simultaneously. In this study, aerosol collection efficiency test was performed to validate the protection performance of permeable clothes and selective permeable membranes. Aerosol collection efficiency test was performed by using the aerosol test equipment that could test aerosol particle diameter from $0.005{\mu}m$ to $3.0{\mu}m$. This study shows the test method and performance test results for collection efficiency by using the aerosol test equipment.

Detection of formation boundaries and permeable fractures based on frequency-domain Stoneley wave logs

  • Saito Hiroyuki;Hayashi Kazuo;Iikura Yoshikazu
    • 지구물리와물리탐사
    • /
    • 제7권1호
    • /
    • pp.45-50
    • /
    • 2004
  • This paper describes a method of detecting formation boundaries, and permeable fractures, from frequency-domain Stoneley wave logs. Field data sets were collected between the depths of 330 and 360 m in well EE-4 in the Higashi-Hachimantai geothermal field, using a monopole acoustic logging tool with a source central frequency of 15 kHz. Stoneley wave amplitude spectra were calculated by performing a fast Fourier transform on the waveforms, and the spectra were then collected into a frequency-depth distribution of Stoneley wave amplitudes. The frequency-domain Stoneley wave log shows four main characteristic peaks at frequencies 6.5, 8.8, 12, and 13.3 kHz. The magnitudes of the Stoneley wave at these four frequencies are affected by formation properties. The Stoneley wave at higher frequencies (12 and 13.3 kHz) has higher amplitudes in hard formations than in soft formations, while the wave at lower frequencies (6.5 and 8.8 kHz) has higher amplitudes in soft formations than in hard formations. The correlation of the frequency-domain Stoneley wave log with the logs of lithology, degree of welding, and P-wave velocity is excellent, with all of them showing similar discontinuities at the depths of formation boundaries. It is obvious from these facts that the frequency-domain Stoneley wave log provides useful clues for detecting formation boundaries. The frequency-domain Stoneley wave logs are also applicable to the detection of a single permeable fracture. The procedure uses the Stoneley wave spectral amplitude logs at the four frequencies, and weighting functions. The optimally weighted sum of the four Stoneley wave spectral amplitudes becomes almost constant at all depths, except at the depth of a permeable fracture. The assumptions that underlie this procedure are that the energy of the Stoneley wave is conserved in continuous media, but that attenuation of the Stoneley wave may occur at a permeable fracture. This attenuation may take place at anyone of the four characteristic Stoneley wave frequencies. We think our multispectral approach is the only reliable method for the detection of permeable fractures.

투수성 포장재와 비점오염저감시설의 삭감부하량 특징 비교 (Reduced Loads Characteristics Comparison Between Permeable Pavement and Non-point Pollutants Treatment Facility)

  • 길경익;전혜선
    • 한국방재학회 논문집
    • /
    • 제11권2호
    • /
    • pp.193-198
    • /
    • 2011
  • 본 연구에서는 최근 추세에 맞춰 개발사업시 장치형 및 자연형등의 인위적인 비점오염저감시설이 아닌 시설지를 투수성 포장재를 사용할 경우 얻어지는 효과를 분석하여, 설계 및 시공시 투수성 포장재 적용을 위한 기초자료를 제공하고자 한다. 그 방법으로 개발시 대상지의 면적을 불투수성과 투수성 개발로 분리 적용하여 삭감오염부하량 및 설치 공사비의 경제성을 비교 분석하였다. 그 결과 비점오염원의 처리용량 및 삭감부하량은 투수성 및 불투수성 개발에 많은 영향을 받으며, 개발시 비점오염저 감시설을 장치형이나 자연형을 단독으로 설치하기 보다는 처리대상 유역을 투수성 지역으로 개발하는 것이 배출부하량이 적은것으로 나타났다. 이를 토대로 개발시 비점오염의 관리를 위해 불투수율 면적비를 일정수준으로 제한하는 대책을 수립하면 개발에 따른 오염원의 최소화가 가능할 것으로 생각된다.

현무암 폐석을 이용한 친환경 투수블록의 성능평가 (Performance Evaluation of Eco-friendly Permeable Block Using Basalt Waste Rock)

  • 이상수;권형순;김재환
    • 한국건설순환자원학회논문집
    • /
    • 제11권4호
    • /
    • pp.299-306
    • /
    • 2023
  • 현무암폐석을 활용한 투수믈록의 성능을 평가하기 위해 현무암폐석의 치환율을 0, 20, 40, 60 (%) 4가지 수준으로 변화시켜 시멘트 및 무시멘트 기반의 투수블록을 제작하여 휨강도, 압축강도, 투수 계수, 흡수율, 밀도, 이산화탄소 저감, 미세먼지 저감 등에 대하여 평가하였다. 그 결과, 휨강도, 압축강도와 밀도는 현무암 폐석의 치환율이 증가함에 따라 감소하였지만 치환율 20 %에서 휨강도가 KS규격에 만족하는 결과값을 보였다. 흡수율, 투수계수, 이산화탄소 저감. 미세먼지 저감 등은 현무암 폐석의 치환율이 증가함에 따라 증가하는 경향을 보였으며, 투수계수는 모든 치환율에서 KS규격을 만족하는 결과를 나타내었고 미세먼지, 이산화탄소 저감과 흡수율은 모든 치환율에서 높은 값을 나타났다. 따라서 시멘트를 사용하지 않아 시멘트 생산과정에서 바생하는 이산화탄소량을 감소시킬 수 있는 무시멘트 기반 투수블록에서 중요한 지표인 투수계수가 KS규격을 만족하였고 공기질 오염물질 저감 성능이 뛰어나기 때문에 휨강도 기준을 만족하는 현무암 폐석 치환율 20 % 내에서 활용한다면 기존의 투수블록이 가지고 있는 문제점을 해결할 수 있는 방안으로 사용할 수 있을 것으로 판단된다.

투수성을 개선시키기 위해 인공투수관 및 분말형 폴리머 VAE를 사용한 투수블록의 특성 (Properties of Permeable Block using Artificial Permeable Pipe and Polymer Powder VAE to Improve Permeability)

  • 유병용;이원규;편수정;김대연;이상수
    • 한국건축시공학회지
    • /
    • 제18권5호
    • /
    • pp.447-453
    • /
    • 2018
  • 인공투수관을 혼입한 폴리머 투수블록은 폴리머를 치환할 경우 강도, 공극률, 투수계수 등의 'KS F 4419'(보차도용 콘크리트 인터록킹 블록)의 기준보다 높은 결과 값이 측정되었으며, 제품의 경량화가 가능할 것으로 판단된다. 폴리머 재료의 단가 문제로 인해 경제성을 고려하여 시멘트와의 치환율을 14%로 선정하는 것이 효과적이라고 판단된다. 또한, 인공투수관의 혼입율의 3가지 수준 중 2.0%가 가장 적당하다고 판단되며, 3가지 수준에 대한 측정 값이 큰 차이를 보이지 않는 것으로 나타났다. 공극률과 투수계수의 경우 2%에서 개선된 값이 측정되었기 때문에 인공투수관 혼입율 2%의가 효과적일 것으로 판단된다. 투수블록 제품화를 하기 위해선 경제성을 고려해야 하며, 본 연구에서 사용된 폴리머 VAE 경제성이 떨어지기 때문에 다른 폴리머의 재료와 비교 실험을 진행하여 문제점을 개선 한다면 투수블록 제품화가 가능할 것이라 판단된다. 본 연구의 결과는 추후 폴리머 및 인공투수관을 활용한 연구의 기초적인 자료로 사용 가능 할 경우 효율적인 데이터로 활용이 가능할 것으로 판단된다.