• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.699-703
• /
• 2018

Flux-switching permanent magnet machines (FSPMM) have doubly-salient and simple structures making it cost effective and suitable for mass production. In addition, it is possible to increase the rotor rotating speed and concentrate the flux of the permanent magnet on the air-gap. Due to these merits, the FSPMM can be applied to the various industry applications. To improve the performance, various design variables need to be studied in terms of design techniques. In this paper, we especially concentrate on the distribution of iron losses using a two-dimensional finite-element method (2D FEM). As a result, we can get an information for high efficiency FSPMM design.

• Journal of Power Electronics
• /
• v.2 no.1
• /
• pp.46-54
• /
• 2002

In this paper a neural network controller for achieving maximum power tracking as well as output voltage regulation, for a wind energy conversion system (WECS) employing a permanent magnet synchronous generator is proposed. The permanent magnet generator (PMG) supplies a dc load via a bridge rectifier and two buck-boost converters. Adjusting the switching frequency of the first buck-boost converter achieves maximum power tracking. Adjusting the switching frequency of the second buck-boost converter allows output voltage regulation. The on-time of the switching devices of the two converters are supplied by the developed neural network (NN). The effect of sudden changes in wind speed and/ or in reference voltage on the performance of the NN controller are explored. Simulation results showed the possibility of achieving maximum power tracking and output voltage regulation simulation with the developed neural network controllers. The results proved also the fast response and robustness of the proposed control system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.3
• /
• pp.204-210
• /
• 2009

This paper proposes a novel current-sensorless maximum torque per ampere control for a surface mounted permanent magnet synchronous motor with low-resolution position sensor. A direct axis current is estimated from the mathematical model of the permanent magnet synchronous motor and the phase angle between direct and quadrature axis voltage commands is controlled to adjust the estimated direct axis current to zero, thus a maximum torque per ampere control can be achieved. The proposed method is suitable for low cost applications with slow dynamic response characteristics.

• Journal of Digital Convergence
• /
• v.5 no.1
• /
• pp.117-130
• /
• 2007

This paper examines whether there exists discrimination of the information usage pattern between tenants of permanent and temporary public rental housing in Korea. Moreover, we focus to examine on that matters between two groups, $7{\sim}12$ pyeongs and $11{\sim}24$ pyeongs that indicate permanent and temporary public rental housing respectively. The results derived in this paper can be summarized as follows: there exists statistical significance in using computer, internet, communication and broadcasting, on the other hand, insignificance in using satellite communication and telephone between them. The implication of this results shows that as widen income gap, also widen gaps in using computer and internet between them. Thus government public rental housing policy should focus to make narrow income gap to diminish information gap between those groups.

• Journal of Magnetics
• /
• v.16 no.3
• /
• pp.288-293
• /
• 2011

Generally, the discontinuous armature permanent magnet linear synchronous motor (PM-LSM) is composed by the stator block (accelerator, re-accelerator, and decelerator) and the free running section. However, the stationary discontinuous armature design involves the velocity variation of the mover during drive when the armature's non-installation part changes over to installation part as a result of the outlet edge of the armature. Therefore, we considered deforming the shape of the outlet edge at the armature and apply skew on the permanent magnet by displacing the two magnet segments of each pole. This paper presents the results of a three-dimensional (3-D) numerical analysis with a finite element method (FEM) of the force exerted by the outlet edge.

• Journal of Magnetics
• /
• v.7 no.2
• /
• pp.55-58
• /
• 2002

MR transfer behaviors of the permanent magnet biased spin valve MR sensors with SyAF (synthetic antiferromagnet) layers were studied by micromagnetics modeling. For narrow track MR heads, various height to width ratios were considered together with strength of permanent magnets which stabilities the free layed As the MR sensor width is reduced to $0.12 \mu{m}$, sensor height less than 0.09 ${\mu}{\textrm}{m}$ is needed to show good linearity and the Mr.t of permanent magnets smaller than 0.2 memu/$cm^2$ is sufficient for the domain stabilization. The conditions for single domain behavior of the free layer were also investigated through optimizing the biasing strength of permanent magneto the shield gap and the aspect ratio of MR sensor.

• KIEAE Journal
• /
• v.10 no.1
• /
• pp.11-18
• /
• 2010

Permanent rental housing complex is subjected to both an increase in the crime rate due to its residential population structure and social, economic isolation for insecurd income of the residents. It should be considered that the densely populated area with low-income group of the city causing many problems related with the community. This study focused on the Man-soo 7 housing estate in Incheon with the area's average scale and ratio is made as an effort to include the residents who live in the permanent rental housing area among the members of the healthy community. The result of the research suggests the method of housing improvement to establish the successful support institution for self-sufficiency of the low income inhabitants analazying the demand of the residents through a survey categorized into resident support system, public workplace and inhabitant participation.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.2
• /
• pp.81-87
• /
• 2005

The torque characteristics of permanent magnet(PM) motor is varied according to magnet width. In this paper, the design method of magnet and magnetic circuit is proposed in order to improve the torque of Interior Permanent Magnet Synchronous Motor(IPMSM). This paper presents the effects of pole arc ratio and salient pole ratio on the torque and torque ripple in the IPMSM with concentrated winding.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.11
• /
• pp.2035-2042
• /
• 2011

In this paper, we proposed the outer-rotor type of FSPM motor for high speed operation and optimized motor shape. First of all, combinations of pole and slot numbers are examined for the optimal back-EMF and cogging torque, then optimizes the better shape design of the permanent magnet, rotor pole width. Further, The winding turns are obtained by circle of the voltage limit equation and motor parameters to minimize the current and to improve the efficiency. As a result, the performance of the designed model is satisfied, and it is verified through a two-dimensional finite element method (2D-FEA).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.5
• /
• pp.652-659
• /
• 2014

This paper deals with characteristic analysis of double sided permanent magnet linear generator using analytical method. We derived magnetic field solutions produced by permanent magnet and armature reaction based on the 2D polar coordinate and magnetic vector potential. based on the derived magnetic field solutions, Induced voltage is obtained when arbitrary sinusoidal input condition. In addition, electrical parameters such as back-EMF constant, resistance, and inductance are obtained. Finally, generating performance characteristic at the rated load and various load is examined by using equivalent circuit.