• Steel and Composite Structures
• /
• 제12권2호
• /
• pp.167-181
• /
• 2012

Ultra high performance cementitious composite material is applied to the design of multifunctional permanent form for bridge pier in this paper. The basic properties and calculating constitutive model of ultra high performance cementitious composite are introduced briefly. According to momental theory of thin-walled shell, the analytical solutions of structural behavior parameters including circumferential stress, longitudinal stress and shear stress are derived for UHPCC thin-walled circular tube. Based on relevant code of construction loads (MHURD of PPC 2008), the calculating parameter expression of construction loads for UHPCC thin-walled circular tube is presented. With geometrical dimensions of typical pier, the structural behavior parameters of UHPCC tube under construction loads are calculated. The effects of geometrical parameters of UHPCC tube on structural behavior are analyzed and the design advices for UHPCC tube are proposed. This paper shall provide a scientific reference for UHPCC permanent form design and UHPCC hybrid structure application.

• International Journal of Concrete Structures and Materials
• /
• 제8권1호
• /
• pp.83-97
• /
• 2014

This paper presents the results of an investigation aimed at developing reinforced concrete beams consisting of precast permanent U-shaped reinforced mortar forms filled with different types of core materials to be used as a viable alternative to the conventional reinforced concrete beam. To accomplish this objective, an experimental program was conducted and theoretical model was adopted. The experimental program comprised casting and testing of thirty beams of total dimensions $300{\times}150{\times}2,000mm$ consisting of permanent precast U-shaped reinforced mortar forms of thickness 25 mm filled with the core material. Three additional typical reinforced concrete beams of the same total dimensions were also cast to serve as control specimens. Two types of single-layer and double-layers steel meshes were used to reinforce the permanent U-shaped forms; namely welded wire mesh and X8 expanded steel mesh. Three types of core materials were investigated: conventional concrete, autoclaved aerated lightweight concrete brick, and recycled concrete. Two types of shear connections between the precast permanent reinforced mortar form and the core material were investigated namely; adhesive bonding layer between the two surfaces, and mechanical shear connectors. The test specimens were tested as simple beams under three-point loadings on a span of 1,800 mm. The behavior of the beams incorporating the permanent forms was compared to that of the control beams. The experimental results showed that better crack resistance, high serviceability and ultimate loads, and good energy absorption could be achieved by using the proposed beams which verifies the validity of using the proposed system. The theoretical results compared well with the experimental ones.

• 콘크리트학회논문집
• /
• 제23권5호
• /
• pp.657-665
• /
• 2011

프리캐스트 콘크리트 페널의 일종인 LB-DECK은 콘크리트 교량 바닥판의 시공시 LB-DECK 위에 현장타설되는 콘크리트와 합성 거동하는 영구 콘크리트 거푸집이다. 현행 LB-DECK은 두께가 60 mm인 콘크리트 슬래브와 슬래브 내부에 높이 125 mm인 lattice-girder들의 일부가 매립되어 있는 구조이다. 이러한 LB-DECK은 시공하중에 의해 종방향 균열이 발생하지 않도록 거더 간격이 충분히 작은 교량 바닥판 시공시 주로 적용되고 있다. 이 논문에서는 최근 강박스 교량과 같이 교량 바닥판의 지간장이 긴 교량에 LB-DECK를 적용할 경우 콘크리트 하부에 발생될 수 있는 종방향 균열을 최소화시키기 위하여, LB-DECK의 균열강도를 평가하기 위한 실험적 연구를 수행하였다. LB-DECK 콘크리트 슬래브의 두께, lattice-girder의 높이, 그리고 top-bar의 지름을 변수로 하는 8종류 24개의 비합성 보부재와 4가지 종류의 합성 보부재 4개를 제작한 후 정적하중 재하실험을 수행하였다. 실험체에 대한 정적하중 재하 실험을 통해 각 실험체의 균열하중과 극한하중을 평가하였으며, 또한 최종 파괴시까지 중앙부 처짐, top-bar의 변형률, 콘크리트 슬래브의 균열 진전 양상 그리고 최종 파괴 형태를 살펴보았다. 각 실험체로부터 얻은 균열하중의 크기는 탄성해석을 통해 얻은 해석치와 비교하였다. 또한 콘크리트 건조수축이 균열강도에 미치는 영향을 파악하기 위하여 AEMM 방법을 이용한 장기 거동 해석을 수행하였다. 실험 결과를 토대로, 지간장이 긴 교량 바닥판에 LB-DECK 적용시, 균열 발생을 예방할 수 있도록 LB-DECK 콘크리트 슬래브의 균열강도와 설계상세를 검토하였다.