• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.5
• /
• pp.753-760
• /
• 1994

This paper proposes a new method to compute the static thrust of a hybrid-type LPM by the coenergy method, which can be applied to a nonlinear programming of the optimization techniques for the optimal design. In the process of the computation, the magnetic nonlinearities of the permanent magnet, the primary and the secondary core are interpolated by the cubic spline method. And then, the equivalent magnetic circuit including the airgap reluctance which is a function of the displacement is modelled by the permeance method. The static thrust which is a derivative of the coenergy is computed by the Newton Raphson method at each displacement. To verify this proposed method, the results of the compjutation are compaction with those of the experiment obtained from the DLPM with 2 phase and 4 poles.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.4
• /
• pp.533-546
• /
• 2021

Large earthquakes with (M_W > ~ 6) result in ground shaking, surface ruptures, and permanent deformation with displacement. The earthquakes would damage important facilities and infrastructure such as large industrial establishments, nuclear power plants, and waste disposal sites. In particular, earthquake ruptures associated with large earthquakes can affect geological and engineered barriers such as deep geological repositories that are used for storing hazardous radioactive wastes. Earthquake-driven faults and surface ruptures exhibit various fault zone structural characteristics such as direction of earthquake propagation and rupture and asymmetric displacement patterns. Therefore, estimating the respect distances and hazardous areas has been challenging. We propose that considering multiple parameters, such as fault types, distribution, scale, activity, linkage patterns, damage zones, and respect distances, enable accurate identification of the sites for deep geological repositories and important facilities. This information would enable earthquake hazard assessment and lower earthquake-resulted hazards in potential earthquake-prone areas.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.6-8
• /
• 2003

Electromagnetic system of motor is being minimized by superior magnetic material and advanced design technology. But this type of motor causes a serious vibration. This is a big problem of motor operation. To decrease a vibration, motor is need to be designed considering mechanical vibration. This paper study about torque, natural frequency and mechanical vibration according to displacement.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.694_695
• /
• 2009

본 논문은 매입형 영구자석 동기 전동기(IPMSM)의 고속출력 구동을 위한 제어 특성 해석을 시뮬레이션을 통해 나타낸다. IPMSM의 d축,q축 인덕턴스인 Ld, Lq 선형모델과 비선형 모델의 선형 제어와 비선형제어를 실험과 시뮬레이션에 의하여 비교 분석 하였다. 본 논문은 IPMSM에 최적화된 제어 시스템 구연에 있어서 기초 자료가 될 것이다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.4
• /
• pp.137-149
• /
• 2011

In this study, we analyzed the effects of seismic displacements due to the mega thrust earthquake occurred near Tohoku-Oki area on Mar. 11, 2011 with Mw 9.0 magnitude in the context of evaluation of position change by the earthquake on the Korean and Asian GPS permanent stations. For this, two weeks GPS data observed around the event of Tohoku-Oki earthquake (Mar. 4 ~ Mar. 18, 2011) were obtained from 22 GPS permanent stations in the vicinity of epicenter (Korea, Japan, Russia, China and Taiwan) and 284 IGS global stations. All available GPS data were processed and adjusted by GAMIT/GLOBK software to estimate the co-seismic horizontal displacements at each station. As the results of GPS analysis, the co-seismic displacements due to Tohoku-Oki earthquake were clearly revealed in the GPS stations of Asian region, Japan and its neighboring countries, and even to affect the horizontal position of GPS station (WUHN in China) which are located about 2,702km away from the epicenter. In conclusion, it was found that the Tohoku-Oki earthquake had resulted in the horizontal displacements ranging from 14.9 mm to 58.3 mm in Korea. So, these displacements can cause the position error of GPS geodetic survey up to 20 mm without updating the coordinates of Korean geodetic network.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.2596-2603
• /
• 2013

The precision and endurance of tire mold are very important factors to decide the quality of tire. However, the investigation on the thermal deformation of tire mold has a lot of trouble because the tire mold is produced in airtight permanent casting material. In this study, the thermal deformations such as temperature, displacement and stress distributions inside the AC7A tire mold casting material were analyzed by numerical analysis according to the preheating temperature of permanent casting device. In order to verify the results of numerical analysis, the experiments for temperature measurement of the AC7A casting material were carried out under the same condition with numerical analysis. For the numerical analysis, "COMSOL Multiphysics" was used. The preheating temperatures were set up $150^{\circ}C$, $200^{\circ}C$, $250^{\circ}C$ and $300^{\circ}C$, respectively. The thermal deformations were calculated in each case. When the preheating temperature is $300^{\circ}C$, displacement and stress are the lowest with 0.25mm and 0.351GPa, but the temperature is the highest with $374.27^{\circ}C$. When the experimental results were compared with the numerical results, there were some temperature differences because of the latent heat by phase change heat transfer. However, the cooling patterns were almost similar except for the latent heat section.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.1
• /
• pp.62-67
• /
• 2011

Early eruption refers to an accelerated eruption of a tooth beyond the normal eruption period. The clinical findings of an early erupted tooth with little formation of crown and/or root include severe mobility, pain on chewing, hypocalcification of the enamel, and inclination, displacement, and rotation of the tooth. The radiographic findings include underdeveloped root and insufficient bone support. Early eruption of a permanent tooth can cause several complications such as chronic trauma, pain, edema, an increased rate of premolar impaction and tooth displacement and/or rotation. Therefore, when a permanent tooth erupts earlier than its normal eruption period with accompanying symptoms, appropriate treatments should be done as soon as possible. A female patient of age 7 without any systemic disease was referred from a local dental clinic with chief complaint of severe mobilities and pain in both upper first premolars. According to the clinical and radiographic examinations, the permanent teeth erupted earlier with barely formed roots, severe mobilities, edema, and pain. This case is to report the successful accomplishment of root formations and stabilization of teeth after applying intraoral fixed appliances using bands and spurs for 14 months.

• Smart Structures and Systems
• /
• v.32 no.6
• /
• pp.359-369
• /
• 2023

Servo-motor driven uniaxial shake tables have been widely used for education and research purposes in earthquake engineering. These shake tables are mostly displacement-controlled by a digital proportional-integral-derivative (PID) controller; however, accurate reproduction of acceleration time histories is not guaranteed. In this study, a control strategy is proposed and verified for uniaxial shake tables driven by a servo-motor. This strategy incorporates a deep-learning algorithm named Long Short-Term Memory (LSTM) network into a displacement PID feedback controller. The LSTM controller is trained by using a large number of experimental data of a self-made servo-motor driven uniaxial shake table. After the training is completed, the LSTM controller is implemented for directly generating the command voltage for the servo motor to drive the shake table. Meanwhile, a displacement PID controller is tuned and implemented close to the LSTM controller to prevent the shake table from permanent drift. The control strategy is named the LSTM-PID control scheme. Experimental results demonstrate that the proposed LSTM-PID improves the acceleration tracking performance of the uniaxial shake table for both bare condition and loaded condition with a slender specimen.

• Journal of Mechanical Science and Technology
• /
• v.17 no.12
• /
• pp.1835-1843
• /
• 2003

This paper introduces the development of the caliper system for a geometry PIG (Pipeline Inspection Gauge). The objective of the caliper system is to detect and measure dents, wrinkles, and ovalities affect the pipe structural integrity. The developed caliper system consists of a finger arm, an anisotropic permanent magnet, a back yoke, pins, pinholes and a linear hall effect sensor. The angle displacement of the finger arm is measured by the change of the magnetic field in sensing module. Therefore the sensitivity of the caliper system mainly depends on the magnitude of the magnetic field inside the sensing module. In this research, the ring shaped anisotropic permanent magnet and linear hall effect sensors were used to produce and measure the magnetic field. The structure of the permanent magnet, the back yoke and pinhole positions were optimized that the magnitude of the magnetic field range between a high of 0.1020 Tesla and a low of zero by using three dimensional nonlinear finite element methods. A simulator was fabricated to prove the effectiveness of the developed caliper system and the computational scheme using the finite element method. The experimental results show that the developed caliper system is quite efficient for the geometry PIG with good performance.

• Tribology and Lubricants
• /
• v.35 no.2
• /
• pp.114-122
• /
• 2019

High-speed rotating machinery requires low cost and reliable bearing elements with low friction, stable rotordynamic characteristics, and a simple design. This study experimentally evaluates the effects of bearing-support elements on the vibrational characteristics of a small-sized, high-speed permanent magnetic motor. A series of coast down tests from 100 krpm characterize the vibrational behaviors, rotor displacement, and housing acceleration of motors supported by ball bearings, ball bearings with a metal mesh damper, and gas foil bearings, respectively. Two eddy-current sensors installed in the horizontal and vertical directions measure the displacement of the rotor at its front nut, and a 3-axis accelerometer attached to the motor housing measures the housing acceleration. The test results reveal that synchronous (1X) vibration components most significantly affect the rotor displacement and housing acceleration, independent of the bearing-support elements. The motor supported by the deep-groove ball bearings results in the largest rotor vibrations increasing with speed; this is due to the absence of a damping mechanism. Additionally, the metal mesh damper effectively reduces the rotor displacement, housing acceleration, and sound-pressure level in the high-speed region (i.e., above 40 krpm), thus implying its substantial damping performance when installed on the outer race of the ball bearing. Lastly, the gas foil bearing supported motor yields the smallest rotor displacement, housing acceleration, and lowest sound-pressure level because of its hydrodynamic airborne operation, which does not require rolling elements that may cause mechanical friction and vibrations.