• Journal of Periodontal and Implant Science
• /
• v.40 no.1
• /
• pp.25-32
• /
• 2010

Purpose: The performance of implant surgery in the posterior maxilla often poses a challenge due to insufficient available bone. Sinus floor elevation was developed to increase the needed vertical height to overcome this problem. However, grafting materials used for the sinus lift technique eventually show resorption. The present study radiographically compared and evaluated the changes in height of the grafting materials after carrying out maxillary sinus elevation with a window opening procedure. This study also evaluated the difference between two xenogenic bone materials when being used for the sinus lifting procedure. Methods: Twenty-one patients were recruited for this study and underwent a sinus lift procedure. All sites were treated with either bovine bone (Bio-$Oss^{(R)}$) with platelet-rich plasma (PRP) or bovine bone (OCS-$B^{(R)}$)/PRP. A total of 69 implants were placed equally 6-8 months after the sinus lift. All sites were clinically and radiographically evaluated right after the implant surgery, 7-12 months, 13-24 months, and 25-48 months after their prosthetic loading. Results: Changes of implant length/bone length with time showed a statistically significant decreasing tendency (P<0.05). There was no significant change in the Bio-$Oss^{(R)}$ group (P>0.05). In contrast, the OCS-$B^{(R)}$ group showed a significant decrease with time (P<0.05). However, no significant difference was observed between the two groups (P>0.05). Conclusions: The results showed that there was significant reduction in comparison with data right after placement, after 7 to 12 months, 13 to 24 months, and over 25 months; however, reduction rates between each period have shown to be without significance. No significant difference in height change was observed between the Bio-$Oss^{(R)}$ and the OCS-$B^{(R)}$ groups.

• Journal of Periodontal and Implant Science
• /
• v.37 no.3
• /
• pp.637-646
• /
• 2007

Implants placed immediately after tooth extraction have been shown to be a successfully predictable treatment modality. Several clinical papers suggest that placing implants immediately after tooth extraction may provide some advantages: reduction of the number of surgical procedures or patient visits, preservation of the dimensions of alveolar ridge, and shortening of the interval between the removal of the tooth and the insertion of the implant supported restoration. In this case report, three patients received single immediate implant placements to replace a maxillary anterior tooth at the time of extraction. As the three cases were somewhat different, treatment protocols had to be modified as follows: Case 1. Immediate implant placement with healing abutment connection. Case 2. Immediate implant placement with immediate provisionalization. Case 3. Immediate implant placement with Guided Bone Regeneration(GBR). Every implant of these cases was placed in proper position buccolingually, mesiodistally and apicocoronally, The procedures following implantation such as immediate provisionalization and GBR were free of problem. Healing of each case was uneventful. In all cases, treatment outcomes were mostly satisfactory and the results maintained during follow-up periods. However, one case (Case 3) showed some papilla loss due to failure in delicate soft tissue handling during surgery. This papilla loss was compromised by prosthetic means. In conclusion, immediate implant placement in the fresh extraction socket can be a valid and successful option of treatment in aesthetic area. Moreover, this treatment protocol seems to maintain the preexisting architecture of soft and hard tissues in most cases.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.465-470
• /
• 2003

Transverse and oblique crown-root fractures constitute a major therapeutic problem, particularly in young dentitions. Because crown-root fracture may involve enamel, dentin, pulp, and periodontal tissues, management of the injuries must be modified accordingly. When the fracture line was located under the alveolar crest. there are several methods for crown-root fractured teeth with pulp exposure, such as extruding the root fragment with orthodontic force and restoring it, or intentionally extracting the tooth and replanting it to a position which it can be restored. This case, the fractured tooth is intentionally extracted atraumatically, and replanted by rotating approximately 180 degree into the original socket and fixing with an orthodontic wire. At the 8-month recall examination, the root still showed normal mobility and there was not observed any inflammatory or replacement root resorption in the periapical radiograph.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.2
• /
• pp.125-132
• /
• 2004

Statements of problem: All ceramic fixed partial denture cores can be made by the slip casting method and the advanced alumina tape method. The fracture resistance of these core connector areas is relatively low. Purpose: The purpose of this study is to standardize the appropriate volumetric figure and location of the connectors in the alumina core fabricated in alumina tape to be used in fixed partial dentures by way of topology optimization. Material and method: A maxillary anterior three-unit bridge alumina core with teeth form and surrounding periodontal apparatus model was used to ultimately design the most structurally rigid form of the connector. Loadings from a $0^{\circ}$, $45^{\circ}$ and $60^{\circ}$ to the axis of each tooth were applied and analyzed with the 3-D finite element analysis method. Using the results from these experiments, the topology optimization was applied and the optimal reinforcement layout of connector was obtained and the detail shape in the fixed partial denture core was designed. Results: The modified prosthesis with the form of a bulk in the lower lingual surface of the connector in the event, reduced the stress concentration up to 20% in the 3-D FEA. Conclusion: The formation of a bulk in the lower lingual connector area of an alumina core for a fixed partial denture decreases the stress to a clinically favorable measure but does not harm the esthetic point of view. This result illustrates the possibility of clinical application of the modified form designed by the topology optimization method.

• Journal of Periodontal and Implant Science
• /
• v.28 no.4
• /
• pp.559-568
• /
• 1998

direct bone apposition during bone remodelling. To address these problem, we developed a new ceramic, calcium metaphosphate(CMP), and report herein the biologic response to CMP in subcutaneous tissue, muscle and bone. Porous CMP blocks were prepared by condensation of anhydrous $Ca(H_2PO_4)_2$ to form non-crystalline $Ca(PO_3)_2$. Macroporous scaffolds were made using a polyurethane sponge method. CMP block possesses a macroporous structure with approximate pore size range of 0.3-1mm. CMP blocks were implanted in 8mm sized calvarial defect, subcutaneous tissue and muscle of 6 Newzealand White rabbits and histologic observation were performed at 4 and 6 weeks later. CMP blocks in subcutaneous tissue and muscle were well adapted without any adverse tissue reaction and resorbed slowly and spontaneously. Histologic observation of calvarial defect at 4 and 6 weeks revealed that CMP matrix were mingled with and directly apposed to new bone without any intervention of fibrous connective tissue. CMP blocks didn't show any adverse tissue reaction and resorbed spontaneously also in calvarial defect. This result revealed that CMP had a high affinity for bone and was very biocompatible. From this preliminary result, it was suggested that CMP was a promising ceramic as a bone substitute and tissue engineering scaffold for bone formation.

• Journal of Periodontal and Implant Science
• /
• v.38 no.4
• /
• pp.589-594
• /
• 2008

Purpose: Osseointegration of implants in patients with pneumatized maxillary sinuses is difficult to achieve due to the deficiency of available bone in the posterior maxilla after loss of teeth. Maxillary sinus elevation is a method to overcome this problem. In this study, we evaluated the implant survival rate and the relationship between implant survival in patients with sinus elevation by the lateral approach. Materials and Methods: A total of 48 patients were consecutively treated with sinus elevation by the lateral approach between February 2003 & August 2006 at the dental hospital of Chonbuk National university. A total of 113 implants were placed. The mean healing period was 7.1 months and implants were placed after a mean period of 5.6 months. The mean observation period was 21.8 months. Results: Out of the 113 implants placed, fifteen failed, resulting in a survival rate of 86.7%, 18 cases of sinus membrane perforation were observed out of 65 sinuses treated. 33 implants were placed in a perforated site and 10 failed, representing a 60.7% implant survival. 80 implants were placed in a nonperforated site and 5 failed, representing a 92.6% implant survival. Conclusions: Implant placement with sinus elevation is an acceptable treatment for short term results. Sinus membrane perforation and postoperative complications, however, may have an effect on implant failure.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.3
• /
• pp.216-222
• /
• 2017

Intellectual disability is an imperfect disorder in which mental development is permanently retarded and development of intellectual ability is inadequate. Having intellectual disabilities makes it difficult to handle their own work and adapt to social life. For this reason, it is difficult to hygienically manage the patient's oral condition, multiple caries are easily observed, and the periodontal disease incidence rate is high. The patient in this case is a 33-year-old female with a mental retardation first grade who had a problem with meals. In first visit, Patients had decreased occlusal vertical dimension and posterior bite collapse due to periodontitis and multiple caries. This case reports a satisfactory functional and esthetic results by reconstructing occlusion using partial removable dental prosthesis.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.4
• /
• pp.580-592
• /
• 2009

Objectives : This study had been performed for Respondents who live in Daegu and Kyungbuk province Age group of 30 to 50 years old. Methods : The oral health state and oral heath care, dental treatments about the use of oral hygiene devices were obtained through self-administering questionnaires from 2 to 31, January, 2009. Results : 1. The toothpick was well known for respondents and automatic brush, gargle, dental floss were practically used. 2. 57.1% of man know oral hygiene device, they know more about oral hygiene device if they have higher degree, and they use more if they are older than others. 3. 55.5% of respondents who think their oral health condition is not healthy enough recognize oral hygiene device, 77.5% of respondents who visited dental clinic around six month recognize oral hygiene device. 82.4% of respondents who had been follow-up. 86.1% of respondents who think their oral health state is good enough doesn't use oral hygiene device, oral hygiene device was used more for respondents who visited dental clinic frequently. 47.1% of respondents who visited dental clinic periodically use oral hygiene device. 4. Respondents who experience implant recognize more about oral hygiene device and periodontal Tx, orthodontics problem, preservative treatment were next. 5. 60.0% of respondents who were educated tooth brushing method recognize it. Oral hygiene device was frequently used if tooth brushing time were increased. 26.4% of respondents who were changed their tooth brushing method used oral hygiene device. Conclusions : Their recognition level was practically low whose age is around 30 to 50. Their oral hygiene device use ratio is higher then others who were educated tooth brush method so that I think we need to recommend for use oral hygiene device and use method.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.2
• /
• pp.757-762
• /
• 2014

Smoking is recognized as a health problem worldwide and there is an established tobacco epidemic in Saudi Arabia as in many other countries, with tobacco users at increased risk of developing many diseases. This cross sectional study was conducted to assess the prevalence of oral mucosal, potentially malignant or malignant, lesions associated with tobacco use among a stratified cluster sample of adults in Jeddah, Saudi Arabia. A sample size of 599 was collected and each participant underwent clinical conventional oral examination and filled a questionnaire providing information on demographics, tobacco use and other relevant habits. The most common form of tobacco used was cigarette smoking (65.6 %) followed by Shisha or Moasel (38.1%), while chewing tobacco, betel nuts and gat accounted for 21-2%, 7.7%, and 5% respectively. A high prevalence (88.8%) of soft tissue lesions was found among the tobacco users examined, and a wide range of lesions were detected, about 50% having hairy tongue, 36% smoker's melanosis, 28.9% stomatitis nicotina, 27% frictional keratosis, 26.7% fissured tongue, 26% gingival or periodontal inflammation and finally 20% leukodema. Suspicious potentially malignant lesions affected 10.5% of the subjects, most prevalent being keratosis (6.3%), leukoplakia (2.3%), erythroplakia (0.7%), oral submucous fibrosis (0.5%) and lichenoid lesions (0.4%), these being associated with male gender, lower level of education, presence of diabetes and a chewing tobacco habit. It is concluded that smoking was associated with a wide range of oral mucosal lesions, those suspicious for malignancy being linked with chewable forms, indicating serious effects.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.5
• /
• pp.579-588
• /
• 2007

Statement of problem: A tenderness of the dentin after tapering of teeth for dental prosthesis is a common phenomenon. In practice, the alternative desensitizer may be used for minor pain after tapering of teeth. Purpose: In this study, the desensitizers were used to investigate the affect decreasing of shear bond strength according to the use of various cement, such as resin, Glass Ionomer, and phosphate cement. Material and method: Three different desensitizers were used on this study Compositions of two dentin desensitizers were HEMA(hydroxyethylmethacrylate) and glutaraldehyde. The other one is oxalic acid. Three dentin desensitizers applied on 12 degrees taper teeth. Then, Ni-Cr crowns were bonded with Resin cement, Zinc Phosphate (ZPC) cement and Glass Ionomer (GIC) cement. 120 human premolar teeth were used for specimens. The specimens were divided into four group as the reference and the empirical each with thirty specimens, then further divided into 12 group according to type of desensitizers and cement types. The shear bond strength were measured by Instron multi task instrument. Results: According to the result, the measured shear bond strength in order from the weakest to the strongest in general was ZPC, Resin, and GIC. And it is found that the application of desensitizers on dentin surface does not affect the shear bond strength. Conclusion: Dentin desensitizers that alleviate or prevent a dentin tenderness, usually contains HEMA and glutaraldehyde compounds. Such desensitizers are widely used in clinical studies. By applying the dentin desensitizer on the exposed dentin surface, the dentin capillary are blocked and periodontal membrane and cementum can not be drawn in pulp cavity. Since HEMA and glutaraldehyde may cause harm to the pulp cavity, an alternative desensitizer was developed.