• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1973-1980
• /
• 2017

In the case of a small UUV operating an active synthetic aperture sonar, various velocity disturbances may occur on the path due to the influence of external underwater environment, and this causes phase errors in coherent synthetic aperture processing, which has a large influence on the detected image. In this paper, when a periodic sinusoidal velocity disturbance is generated in the traveling direction, the phase generated by the round trip slope range at each position is estimated the cross correlation coefficient for multiple received signals and compensated the position variation in the overlapped DPC by the average value within the maximum allowable width. Through simulations, it has been confirmed that the images degraded by the velocity disturbance amplitude and fluctuating frequency of the UUV are removed from the false targets and the performance of azimuth resolution is improved by the proposed phase compensation method.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.5
• /
• pp.455-461
• /
• 2018

The purpose of this study is to evaluate the tensile strength performance of the polyurethane coating material used as the waterproofing material in concrete structures. A linear regression equation is proposed to establish a correlation on the tensile strength of polyurethane coating membrane against periodic exposure to chemical degradation. The polyurethane film membrane showed a minimum strength of 23% to a maximum of 38% when subjected to chemical degradation. The elongation rate showed a relation with the tensile strength deterioration rate of at least 15% to 22% at maximum, and the proposed regression equation could be used to predict the degree of performance change of the polyurethane coating membrane under chemical degradation condition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.8
• /
• pp.629-637
• /
• 2013

Chaos communication systems have the characteristics such as non-periodic, wide-band, non-predictability of signals and easy implementation. There have been many studies about chaos communication systems because of these advantages. But, chaos communication systems have low BER(Bit Error Rate) compare to general digital communication system. Existing researches on chaos communication systems only analyze BER performance according to various chaos maps. There are no studies on analysis of BER performance according to PDF(Probability Density Function) of chaos maps. In this paper, we analyze the BER performance according to changing parameter, equation, and initial values of chaos map's PDF. In addition, we propose new chaos map to improve BER performance. Simulation results show that BER performance of CDSK(Correlation Delay Shift Keying) is changed when PDF of chaos map changed. And the proposed chaos map has a better BER performance compare to previous chaos maps such as Tent map, Logistic map, and Henon map.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.8
• /
• pp.638-643
• /
• 2013

Chaos communication system has a sensitive characteristic to initial conditions, because completely another signal is generated when initial condition of chaos equation is changed subtly. Also, chaos communication systems have the characteristics of non-periodic, non-predictability, the broadband signal, such as ease of implementation. Due to these characteristics, security of chaos communication system generally is evaluated better than other systems. However, BER(Bit Error Rate) performance is evaluated worse than other digital system, because existing chaos communication system's transmitter and receiver are strong influence by interference signal and noise. So, research to improve the BER performance of the chaotic communication system is performed continuously. In this paper, We will propose a new CDSK(Correlation Delay Shift Keying) receiver for BER performance improvement. After we compare to the performance of existing CDSK receiver and proposed CDSK receiver, BER performance of proposed CDSK receiver evaluate. Also, when using the new CDSK receiver, we evaluate the BER performance according to the spreading factors and find an optimum spreading factor. If chaos communication system use a new CDSK receiver, BER performance is improved than existing CDSK receiver. Also, if spreading factor's value is increased, BER performance is improved, because it is not nearly affected by interference signal and noise.

• Journal of Preventive Medicine and Public Health
• /
• v.35 no.3
• /
• pp.214-220
• /
• 2002

Objectives : To investigate the relationship of serum uric acid to cardiovascular risk factors in Korean male workers. Methods : We screened 522 male workers at an electrical manufacturing company by a periodic health examination and a questionnaire survey in 2000. We collected data relating to age, smoking status, alcohol drinking status, body mass index (BMI), blood pressure, serum lipid, fasting blood glucose and serum uric acid. The data were analyzed using a variety of methods, including ANOVA, Pearson's correlation, and multivariate regression analyses. to examine the association between uric acid and cardiovascular risk factors with a cross-sectional study design. Results : The concentration of serum uric acid showed positive associations with BMI, total cholesterol, triglyceride, and LDL-cholesterol; it was also significantly correlated to systolic and diastolic blood pressures. Life-style characteristics, such as smoking and alcohol drinking showed no significant association. From the multivariate regression analyses, BMI, total cholesterol and fasting blood glucose levels were found to be independent positive predictors of uric acid; while age, blood pressure and smoking status give no independent contribution explaining the variability of serum uric acid levels. Conclusions : This study demonstrates that serum uric acid level have a significant association with cardiovascular risk factors, such as BMI, total cholesterol and blood glucose in some Korean male workers.

• Structural Engineering and Mechanics
• /
• v.31 no.5
• /
• pp.507-526
• /
• 2009

Based on numerical and experimental methods, a systematic structural evaluation of a steel natatorium in service was carried out in detail in this paper. Planning of inspection tasks was proposed firstly according to some national codes in China in order to obtain the economic and reliable results. The field visual inspections and static computation were conducted in turn under in-service environmental conditions. Further a three-dimensional finite element model was developed according to its factual geometry properties obtained from the field inspection. An analytical modal analysis was performed to provide the analytical modal properties. The field vibration tests on the natatorium were conducted and then two different system identification methods were used to obtain the dynamic characteristics of the natatorium. A good correlation was achieved in results obtained from the two system identification methods and the finite element method (FEM). The numerical and experimental results demonstrated that the main structure of the natatorium in its present status is safe and it still satisfies the demand of the national codes in China. But the roof system such as purlines and skeletons must be removed and rebuilt completely. Moreover the system identification results showed that field vibration test is sufficient to identify the reliable dynamic properties of the natatorium. The constructive suggestion on structural evaluation of the natatorium is that periodic assessment work must be maintained to ensure the natatorium's safety in the future.

• Journal of Environmental Health Sciences
• /
• v.43 no.5
• /
• pp.360-369
• /
• 2017

Objectives: The organizational culture of small-scale enterprises is influenced by a lack of awareness of industrial accidents and a business-oriented culture. Therefore, the purpose of this study is to establish a correlation between chemical awareness and worker safety, which is the reason why a company's safety environment is responsible for human factor accidents. Methods: The research model established the organizational culture, human relationships, organizational relationships, workplace culture, safety climate, and safety parameters, all of which affect the perception of chemical substances, then established safety rankings, communication, safety regulations, and safety support. Results: In order to derive the results of this study, the satisfaction level was mostly derived from the degree of engagement (+) depending on the number of years worked, in the hierarchical regression analysis. During work with chemicals, the number of years spent on the level of the service was determined by the influence of the chemical (-). Based on this company, the occurrence of chemical accidents caused by chemical materials was felt to be felt at the risk of causing the hazard to be felt, the absence of physical damage was excluded from the variables. The other variables detected in the variables were $62.8{\pm}24.4$. Conclusion: As a result, it is necessary to develop a statistical model for the verification of the hierarchical regression analysis, and the relationship between safety and awareness of the dangers of chemicals and biological agents requires periodic safety training. Job satisfaction was found to be higher if the level of awareness was sufficient.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.6
• /
• pp.690-699
• /
• 2014

Jet engine modulation(JEM) is a technique used to identify the jet engine type from the radar target signature modulated by periodic rotation of the jet engine mounted on the aircraft target. As a new approach of JEM, this paper proposes an automatic algorithm for extracting the jet engine information. First, the rotation period of the jet engine is yielded from auto-correlation of the JEM signal preprocessed by complex empirical mode decomposition(CEMD). Then, the final blade number is estimated by introducing the DM(Divisor-Multiplier) rule and the 'Scoring' concept into JEM spectral analysis. Application results of the simulated and measured JEM signals demonstrated that the proposed algorithm is effective in accurate and automatic extraction of the jet engine information.

• Journal of the Korean Institute of Gas
• /
• v.11 no.3
• /
• pp.19-25
• /
• 2007

The heat transfer phenomena in a coil-typed LPG vaporizer with a hot water bath employed an electrical heating system were experimentally analyzed. The heat energy is initially used to sensible heat region to heat LPG and then is done to latent heat region to vaporize LPG and to heat up the vaporized gas. A two-phase flow region could be found from periodic temperature fluctuations, and only sensible heat effect was found after passing through the region. The overall heat capacity was defined as multiplying the overall heat transfer coefficient by the heat transfer area and we found a correlation employing the heating water temperature and LPG flow rate. The results of this work can effectively be applied for the design of field scale LPG vaporizers in the near future because they can predict the features of heat transfer on a kind of coil type LPG vaporizer.

• Journal of Korea Water Resources Association
• /
• v.35 no.3
• /
• pp.275-284
• /
• 2002

In this study, a method of random resampling of residuals from stochastic models such as the Monte-Carlo model, the lag-one autoregressive model(AR(1)) and the periodic lag-one autoregressive model(PAR(1)), has been adopted to generate a large number of long traces of annual and monthly steamflows. Main advantage of this resampling scheme called the Bootstrap method is that it does not rely on the assumption of population distribution. The Bootstrap is a method for estimating the statistical distribution by resampling the data. When the data are a random sample from a distribution, the Bootstrap method can be implemented (among other ways) by sampling the data randomly with replacement. This procedure has been applied to the Yongdam site to check the performance of Bootstrap method for the streamflow generation. and then the statistics between the historical and generated streamflows have been computed and compared. It has been shown that both the conventional and Bootstrap methods for the generation reproduce fairly well the mean, standard deviation, and serial correlation, but the Bootstrap technique reproduces the skewness better than the conventional ones. Thus, it has been noted that the Bootstrap method might be more appropriate for the preservation of skewness.