• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.1
• /
• pp.51-58
• /
• 2021

In this paper, a multi-scale finite element (FE) modeling methodology for three-dimensional (3D) needle-punched (NP) C/SiC with a complex microstructure is presented. The variations of the material properties induced by the needle-punching process and complex geometrical features could pose challenges when estimating the material behavior. For considering these features of composites, a 3D microscopic FE approach is introduced based on micro-CT technology to produce a 3D high fidelity FE model. The image processing techniques of micro-CT are utilized to generate discrete-gray images and reconstruct the high fidelity model. Furthermore, a subcell modeling technique is developed for the 3D NP C/SiC based on the high fidelity FE model to expand to the macro-scale structural problem. A numerical homogenization approach under periodic boundary conditions (PBCs) is employed to estimate the equivalent behavior of the high fidelity model and effective properties of subcell components, considering geometry continuity effects. For verification, proposed models compare excellently with experimental results for the mechanical behavior of tensile, shear, and bending under static loading conditions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.667-678
• /
• 2002

In this paper, a new radiating structure with a multi-layered two-dimensional metallic disk array was proposed for shaping the flat-topped element pattern. It is an infinite periodic planar array structure with metallic disks finitely stacked above the radiating circular waveguide apertures. The theoretical analysis was in detail performed using rigid full-wave analysis, and was based on modal representations for the fields in the partial regions of the array structure and for the currents on the metallic disks. The final system of linear algebraic equations was derived using the orthogonal property of vector wave functions, mode-matching method, boundary conditions and Galerkin's method, and also their unknown modal coefficients needed for calculation of the array characteristics were determined by Gauss elimination method. The application of the algorithm was demonstrated in an array design for shaping the flat-topped element patterns of $\pm$20$^{\circ}$ beam width in Ka-band. The optimal design parameters normalized by a wavelength for general applications are presented, which are obtained through optimization process on the basis of simulation and design experience. A Ka-band experimental breadboard with symmetric nineteen elements was fabricated to compare simulation results with experimental results. The metallic disks array structure stacked above the radiating circular waveguide apertures was realized using ion-beam deposition method on thin polymer films. It was shown that the calculated and measured element patterns of the breadboard were in very close agreement within the beam scanning range. The result analysis for side lobe and grating lobe was done, and also a blindness phenomenon was discussed, which may cause by multi-layered metallic disk structure at the broadside. Input VSWR of the breadboard was less than 1.14, and its gains measured at 29.0 GHz. 29.5 GHz and 30 GHz were 10.2 dB, 10.0 dB and 10.7 dB, respectively. The experimental and simulation results showed that the proposed multi-layered metallic disk array structure could shape the efficient flat-topped element pattern.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.1
• /
• pp.11-23
• /
• 2022

This study aims to systematically review the candidate types for OECMs suitable for domestic conditions in areas related to the Korea Forest Service in order to achieve the goal of establishing the protected areas and OECMs system required by Post-2020 GBF, and to provide basic data for the establishment of the national protected areas system. As a result of the study, the selection criteria for OECMs were presented, and it was found that arboretums·botanical gardens, Natural Recreation Forests, and air holes may correspond to the Candidate Types for OECMs. As a result of evaluating the possible areas for OECMs based on the OECMs selection criteria, in the case of arboretums·botanical gardens, it is judged that only conservation areas can be designated as OECMs, except for areas mainly used by visitors of arboretums·botanical gardens that fall under the BGCI conservation type among national and public arboretums·botanical gardens. However, private and school arboretums·botanical gardens have personal property ownership, so it was judged to have no effective measures to control activities that may adversely affect biodiversity, which showed limitations in designation of OECMs. Natural Recreation Forests was found to meet the OECMs selection criteria. However, private forests have personal property ownership, which limits the designation of OECMs. Therefore, it is necessary to strengthen the function of in-situ conservation in order to meet the OECMs for private and school arboretums·botanical gardens, and private forests that have personal property ownership. To this end, effective measures are needed to achieve biodiversity conservation outcomes, and it is judged that legal control and corresponding support policies (incentives) are needed. In the case of air holes, for sustainable conservation, the management boundary of air holes should be clearly defined based on the preparation of laws and guidelines related to air holes. In addition, it is judged that it is desirable to designate the competent local forest office as the management authority and conduct periodic detailed surveys of air holes, establish and implement the conservation plans based on those.