• Nuclear Engineering and Technology
• /
• v.51 no.3
• /
• pp.746-754
• /
• 2019

Vitrification of radioactive liquid waste (RLW) provides a feasible solution for isolating radionuclides from the biosphere for an extended period. In vitrification, base glass and radioactive waste are added simultaneously into the melter. Determination of heat and mass transfer rates is necessary for rational design and sizing of melter. For obtaining an assured product quality, knowledge of reaction kinetics associated with the thermal decomposition of waste constituents is essential. In this study Thermogravimetry (TG) - Differential Thermogravimetry (DTG) of eight kinds of nitrates and two oxides, which are major components of RLW, is investigated in the temperature range of 298-1273 K in the presence of base glasses of five component (5C) and seven component (7C). Studies on thermal behavior of constituents in RLW were carried out at heating rates ranging from 10 to $40\;K\;min^{-1}$ using TG - DTG. Thermal behavior and related kinetic parameters of waste constituents, in the presence of 5C and 7C base glass compositions were also investigated. The activation energy, pre-exponential factor and order of the reaction for the thermal decomposition of 24% waste oxide loaded glasses were estimated using Kissinger method.

• Architectural research
• /
• v.16 no.4
• /
• pp.203-210
• /
• 2014

The packaged terminal air conditioner, the typical cooling system for the residential buildings, consumes a large amount of electricity in a short period time during peak hours. In order to reduce the peak load and conserve the electricity, the thermally activated building system can be used as a secondary system to handle the partial cooling load. However, the thermally activated building system may cause condensation and under-cooling. Thus, design of both systems should be performed with careful investigation in characteristics of both systems to amplify the advantages. Since the thermally activated building system has the time-delay effect which may cause under-cooling, the system is designed to handle the base load of the building. Hence, simple simulation with EnergyPlus was performed to observe the characteristics of cooling load in residential buildings. Once the possible range of the load handling ratio of the thermally activated building system was decided, characteristics of system was analyzed in terms of hardware component and operation parameters. The hardware components were analyzed in plant and system aspects and the operation parameter was evaluated in the thermal comfort aspect. As the load handling ratio increased, the thermal comfort increased due to the lower radiant mean temperatures. Within the range of thermal comfort, the several adjustments were made in setpoint temperature and electricity consumptions of difference cases were observed to decide which components and parameters were important for designing the systems.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.198-198
• /
• 2017

Cultivated varieties of sweet potato were from dry texture type to tender texture type on the basis of consumer preferences. There are many differences in the quantity of sweet potato, starch content, pigment, and sugar content depending on the cultivation season and area, even in the same variety. Therefore, in this study, we attempted to establish optimum time of harvesting through growth characteristics and variation in component like starch, sugar, polyphenol and flavonoid. Four sweet potato varieties were used in this experiment. Among them, Jinhongmi (JHM) & Yulmi (YM) were as dry texture type and Pungwonmi (PWM) & Hogammi (HGM) were as tender texture type. Sweet potatoes were transplanted on 23 May, 2016 and were investigated storage root weight and component contents every 20 days from 60 days to 120 days and surveyed yield at 110, 120, 130 days after transplantation. Result revealed that storage root weight of YM, JHM, and HGM were 30.1, 38.9, 20.8 g respectively in 60 days after transplanting. Storage roots of PWM gerw faster with the weight of 88.2 g. In 120 days after transplanting, storage root weight varied from 88.3 to 118.7 g, HGM was the smallest, and PWM was the largest. Sugar contents of sweet potato ranged from 21.0 to $23.8Brix^{\circ}$ in 60 days after transplanting and from 27.5 to $30.78Brix^{\circ}$ in 120 days after transplanting. In particular, the sugar content of HGM was the highest over $30Brix^{\circ}$ after 80 days. The starch content of dry texture type (YM, JHM) increased from 15.5% to 20.4% and tender texture type (PWM, HGM) increased from 11.0% to 17.3%. Starch content tended to be high in dry type sweet potatoes. The content of polyphenol and flavonoid were highest in 60 days after transplanting and was reduced according to cultivation period. The total yield of PWM was high as 3,154 kg/10a and large storage root of over 250 g accounted for 47.4% in 110 days after transplanting. Storage root (YM, JHM, HGM) of 81~150 g accounted for 34.9% ~ 43.2% in 120 days after transplanting. These are the most marketable. Because consumer in Korea prefers small, round and about 100g size sweet potato. The ratio of large storage root (over 250 g) were increased in all varieties at 130 days after transplanting. Therefore, it is considered appropriate to harvest PWM at 110 days and YM, JHM, HGM at 120 days after transplanting, which planted in late May.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.3 no.2
• /
• pp.81-89
• /
• 1999

This study estimates the correlation dimensions of the land-sea breeze phenomenon, that has a clear diurnal cycle, in order to gain a more detailed understanding of this phenomenon. The data adopted include north-south wind velocity component(v) and temperature(T) time series that were observed at Kimhae Airport and Inje University over a period of 5 days, from the 4th to the 8th of August, 1994. The embedding phase space of the time series were reconstructed from 2 to 14 dimensions, and the correlation dimensions of the attractors were then estimated. The results show that the land-sea breeze phenomenon exhibits a deterministic chaos with non-integer correlation dimension values between 2 and 3. Accordingly, 3 is the minimum number of independent variables required to model the dynamics of the landsea breeze phenomenon in the Kimhae area. Since the saturated embedding dimension, when the correlation dimension remains unchanged, is larger for the wind velocity v-component than for temperature, this indicates that wind velocity is susceptible to topology.

• Journal of The Korean Astronomical Society
• /
• v.50 no.6
• /
• pp.185-190
• /
• 2017

We present observations of $HCO^+$ 1-0 absorption lines toward two extragalactic compact radio sources, NRAO 150 and BL Lac with the Korean VLBI Network in order to investigate their time variation over 20 years by Galactic foreground clouds. It is found that the line shape of $-17kms^{-1}$ component changed marginally during 1993-1998 period and has remained unaltered thereafter for NRAO 150. Its behavior is different from that of $H_2CO$ $1_{10}-1_{11}$, suggesting chemical differentiation on ~ 20 AU scale, the smallest ever seen. On the other hand, BL Lac exhibits little temporal variation for the $HCO^+$ and $H_2CO$ lines. Our observation also suggests that Korea VLBI Network performs reliably in the spectrum mode in that the shapes of the new $HCO^+$ 1-0 spectra are in good agreement with the previous ones to an accuracy of a few percent except the time varying component toward NRAO 150.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.7
• /
• pp.1-6
• /
• 2020

Micro-structure components applied to various disciplines are steadily demanded with lighter weight and better quality. This is because that ultra thin-wall injection molding has been paid attention with a lot of benefits such as cost reduction, shorter process period, and so forth. However, this technology is complicate and difficult to obtain high quality of products compared with conventional injection molding due to warpage caused by uneven shrinkage and molecular orientation. Since warpage of products directly affects product quality and overall performance of devices, it is essential to predict deformation behavior to achieve high precision of molded products. Therefore, this study aims to find out adequate thin-wall mold design for FPC connector housing by employing Moldflow simulation before application. In addition, experimental research is performed by using a fabricated mold structure based on simulated results to prove accuracy and reliability of the suggested simulation for warpage analysis.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.43-51
• /
• 2001

When percentages of the component of raw lacquer were changed by adding each components that is urushiol, polysaccharide and glycoprotein, the physical properties of refined lacquer were changed and the period of refining also were changed. When polysaccharide component extracted from raw lacquer was added in raw lacquer, the period of refining was shortened about 1/3 times and this refined lacquer film was dried faster than the refined lacquer which was not added any other components. When urushiol extracted from raw lacquer was added in raw lacquer, the transparency of dried film was improved. A case of Guizhoushang was improved of the tensile strength of dried film. When both urushiol and polysaccharide were added in raw lacquer, the drying time of refined lacquer was shortened and the tensile strength of them also was improved.

• Nuclear Engineering and Technology
• /
• v.48 no.5
• /
• pp.1237-1251
• /
• 2016

Although the horizontal component of an earthquake response can be significantly reduced through the use of conventional seismic isolators, the vertical component of excitation is still transmitted directly into the structure. Records from instrumented structures, and some recent tests and analyses have actually seen increases in vertical responses in base isolated structures under the combined effects of horizontal and vertical ground motions. This issue becomes a great concern to facilities such as a Nuclear Power Plants (NPP), with specialized equipment and machinery that is not only expensive, but critical to safe operation. As such, there is considerable interest worldwide in vertical and three-dimensional (3D) isolation systems. This paper examines several vertical and 3D isolation systems that have been proposed and their potential application to modern nuclear facilities. In particular, a series of case study analyses of a modern NPP model are performed to examine the benefits and challenges associated with 3D isolation compared with horizontal isolation. It was found that compared with the general horizontal isolators, isolators that have vertical frequencies of no more than 3 Hz can effectively reduce the vertical in-structure responses for the studied NPP model. Among the studied cases, the case that has a vertical isolation frequency of 3 Hz is the one that can keep the horizontal period of the isolators as the first period while having the most flexible vertical isolator properties. When the vertical frequency of isolators reduces to 1 Hz, the rocking effect is obvious and rocking restraining devices are necessary.

• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.22.1-22.1
• /
• 2011

Two dominant components of polar motion are the Chandler and the annual components. Recently, the existence of 500-day period component in the Earth's polar motion has been manifested. But its existence is not clear on Fourier spectrum. One cause of difficulty involved here is that the amplitudes of the two main components are slightly variable in time by certain amounts (Chandler: 0.15~0.28 arcsec, annual: 0.09~0.15 arcsec). A residual polar motion time series excluding the two main components for a time span between 1962 Jan and 2010 Nov from IERS C04 time series dataset was constructed by least square fitting. For faithful fitting, 43 time segments of 6.8 year length (each starts on January 1st of successive years) were separately acquired and later combined together. The period of dominant peak in the spectrum of this residual polar motion time series is 490 days. Next peaks have their periods as semi-annual, 300~330 days, ~560 days, 670 days, and 1360 days.

• Korean Journal of Food Science and Technology
• /
• v.41 no.2
• /
• pp.151-156
• /
• 2009

Samhaeju is a traditional Korean noble rice wine, in which its processing is performed at low temperatures for an extended fermentation time and with three brewing steps. In this study, Samhaeju was prepared by different brewing methods that were modified from the method in the literature. Chemical composition of samples were determined to evaluate the quality of the Samhaeju. The Samhaeju was analyzed for pH, total acids, amino nitrogen, Hunter color values, free sugars, organic acids, and volatile components. Before the addition of the second and third mashing, pH values had decreased slightly and total acids had rapidly increased. Free sugar and amino nitrogen contents were high in final product. After addition of the third mashing as the advanced step, a dilution effect was shown. Glucose (A: 0.77-7.0%, B: 0.77-3.81%) was a major free sugar, and lactic acid (A: 0-2,840mg%, B: 0-3,375mg%) was a major organic acid during the entire period of fermentation. Based on principal component analysis of electronic nose data for the components, the stages of Samhaeju fermentation were primarily separated along the first principal component (PC, proportion : 98.67%). The first PC component (PC1) was moved from negative value(-6.16) to positive value(9.00) with increasing fermentation time. The change patterns for pH and total acid during the fermentation period were similar to those of PC1 from the data obtained by electronic nose based on mass spectrometry.