• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.4
• /
• pp.55-62
• /
• 2004

In this paper, we have developed a portable acceleration measurement system to measure acceleration signals during walking and a gait analysis algorithm which can evaluate gait regularity and symmetry and estimate gait parameters automatically. Portable acceleration measurement system consists of a biaxial accelerometer, amplifiers, lowpass filter with cut-off frequency of 16Hz, one-chip microcontroller, EEPROM and RF(TX/RX) module. The algerian includes FFT analysis, filter processing and detection of main peaks. In order to develop the algorithm, eight hemiplegic patients for training set and the other eight hemiplegic patients for test set are participated in the experiment. Acceleration signals during 10m walking were measured at 60 samples/sec from a biaxial accelerometer mounted between L3 and L4 intervertebral area. The algorithm, detected foot contacts and classified right/left steps, and then calculated gait parameters based on these informations. Compared with video data and analysis by manual, algorithm showed good performance in detection of foot contacts and classification of right/left steps in test set perfectly. In the future, with improving the reliability and ability of the algerian so that calculate more gait Parameters accurately, this system and algerian could be used to evaluate improvement of walking ability in hemiplegic patients in clinical practice.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.1
• /
• pp.171-184
• /
• 2010

In this work, we develop a novel channel power allocation method for the real-time multimedia over the wireless network environment. Since each frame has different effect on the user perceivable QoS, improving packet loss does not necessarily coincide with perceivable improvements in QoS. A new channel power control scheme is suggested based on the quantified importance of each frame in terms of user perceivable QoS. Dynamic programming formulation is used to obtain optimal transmit power which minimizes power consumption and maximizes user perceivable QoS simultaneously. The experiment is performed by using publicly available video clips. The performance is evaluated using network simulator version 2 (NS 2) and decoding engine is embedded at the client node, and calculated PSNR over the every frame transmitted. Through the semantics aware power allocation (SAPA) scheme, significant improvement on the QoS has been verified, which is the result of unequal protection to more important packets. SAPA scheme reduced the loss of I frame by upto 27% and reduced power consumption by upto 19% without degradation on the user perceivable QoS.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.3
• /
• pp.445-453
• /
• 2012

The aim of this paper was to prove that if the risk level in combined tasks was improved through evaluation of postural load of liquid weight measurement process, the workload level and ratio of exposure time would be changed, and the time of process would be seen concurrently. Background: According to results of epidemiological studies conducted by Korea Occupational Safety & Health Agency, 122 musculoskeletal disorders occurred during 1992 to 2008, in which manufacturing industry covers 96(78.7%) of total. However, this is an insufficient level and only occupies 39% based on the South Korea's manufacturing standard industrial classification(246 industries). Method: Firstly, the number of batches weighed on one day(460min) was investigated based on the work performed and Weight measured weekly. VCR recording was taken based on the level of liquid ingredients prescribed for 1batch using the Camcorder. After dividing a 356 sec video into 1 sec using the screen capture function in Gom player, the job classification was performed by analyzing the change of working postures, which revealed 148 working postures. Time measurement was decided by time of the postures was being maintained. Then, the REBA analysis was performed for the working postures. The ratio of Exposure time was calculated based on the measurement time and REBA Score. In addition, the recommendations were designed and implementation was carried out for the working postures with REBA Score higher than 3. Finally, after the intervention, REBA measurement, time measurement, and ratio of exposure time were calculated for the comparison of works before and after improvement. Results: The number of work elements was decreased by 30.4% from 148 to 103 after improvement. The results of time measurement showed that the time was reduced by 46.3% from 356 sec to 191 sec. And the ratio of exposure time was also improved by 52.1% from 0% to 52.1% after improvement. Conclusion: The reduction of time was found to improve the productivity of management. Furthermore, because the reduction of ratio of exposure time and the improvement of workload level are the improvement of discomfort, it would contribute to the improvement of the worker's psychological working posture. Application: These results would contribute to musculoskeletal disease prevention and management performance. Further studies for other industries would be needed based on this case study.

• Archives of design research
• /
• v.19 no.6 s.68
• /
• pp.27-32
• /
• 2006

TYME is an interactive typography program based on the ephemeral nature of time. It is a text based poetic tool, built with Processing. This project is presented as a performance that utilizes a computer with a display screen, a projector, and speakers. As the user types, white characters appear, flow on the score on the screen and trigger jazz sounds, then characters disappear into black space in several seconds on the screen like smoke. Typography from this invented instrument is evocative and wistful, and allows the user to associate with ephemeral time. While typing the characters as though playing an instrument at intervals of time, the user can freeze the motion and print out or save otherwise fleeting moment with a button. I intend to contain both characteristics: the amorphous shape of smoke and the elusive attribute of smoke for the expression of intangible and ephemeral time. Every alphabetic shape is derived from the video dips that I shot of smoke. The resulting alphabetic images are then programmed using the Processing scripting language and which can then be typed on the screen with a keyboard. TYME could be a model as a project that reflects the unfixed quality of digital typography, and as a design approach for interactive expressive typography by scripting code. This project also represents the characteristics of typographic play, which can be realized in an computational environment like this model.

• Journal of Korean Society of Transportation
• /
• v.35 no.4
• /
• pp.332-347
• /
• 2017

Analysis of the interaction between the automated vehicles and manual vehicles is very important in analyzing the performance of automated cooperative driving environments. In particular, the automated vehicle platooning can affect the driving behavior of adjacent manual vehicles. The purpose of this study is to analyze the lane change behavior of the manual vehicles in automated vehicle platonning environment and to conduct the experiment and questionnaire surveys in three stages. In the first stage, a video questionnaire survey was conducted, and responsive behaviors of manual vehicles were investigated. In second stage, the driving simulator experiments were conducted to investigate the lane change behaviors of in automated vehicle platonning environments. To analyze the lane change behavior of the manual vehicles, lane change durations and acceleration noise, which are indicators of traffic flow stability, were used. The driving behavior of manual vehicles were compared across different market penetration rates (MPR) of automated vehicles and human factors. Lastly, NASA-TLX (NASA Task Load Index) was used to evaluate the workload of the manual vehicle drivers. As a result of the analysis, it was identified that manual vehicle drivers had psychological burdens while driving in automated vehicle platonning environments. Lane change durations were longer when the MPR of the automated vehicles increased, and acceleration noise were increased in the case of 30-40 years old or female drivers. The results from this study can be used as a fundamental for more realistic traffic simulations reflecting the interaction between the automated vehicles and manual vehicles. It is also expected to effectively support the establishment of valuable transportation management strategy in automated vehicle environments.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.1
• /
• pp.1-8
• /
• 2004

The single line hook fishery for giant pacific octopus, Parotopus dofleini is one of the important in coastal Kangwon-do of Korea, where was caught an average of 4,000 ton during the period of 1996~2000. The fishing gear is consisted of a single buoy line, a buoy and a hook. In this study, the responses of giant pacific octopus to single line hook gear were examined in an experimental tank using a video camera in order to know hooking mechanism and improve hook. Giant pacific octopus tend to envelop the bait with their arms by rush or slowly swimming towards it. When they rush to the bait, they show much feeding behaviour as withdrawing after enveloping the bait using two arms. But when they approach with slowly swimming to bait, they show feeding behaviour as stopping after enveloping the bait using one arm. and then, the highly hooking rate appeared more often in the case of latter then former. The average feeding time on a sardine, giant pacific octopus and pork fat showed the range of 1 to 30 min, 10 to 50 min, and 50 min to over 1 hour, respectively. This indicates that it takes longer time for giant pacific octopus to eat the tough meat than the soft meat. The performance concerned with hooking showed that the 'B' type hook with a short shank was more favorable than the 'A' type hook with a long shank. However, the 'A' type hook has the advantage of easy dropping out caught octopus, compared to the 'B' type.

• Journal of Korea Multimedia Society
• /
• v.1 no.1
• /
• pp.98-108
• /
• 1998

In the multimedia tele-medical system the medical informations are stored and managed in multimedia database. Also, multimedia DBMS is essential in order to manage large scale medical informations, and the remote access function is necessary for the distributed processing at all around the hospital. For the multimedia tele-medical information that is composed of image/picture, data, video, and audio, a high-speed telecommunication network is necessary that can provide separated connections for each medical information type with different QoS. The commercial DBMSs are based on the TCP/IP socket API(Application Programming Interface) that does not provide multiple QoS. Also, each commercial DBMS has its own API that is incompatible with other DBMS. In this paper, we propose a multimedia DBMS agent for the remote access of the multimedia database in the tele-medical system. The proposed multimedia DBMS agent is based on the ATM API that can provide high-speed data transfer capability and multiple QoS connections. Also, the proposed multimedia DBMS agent is independent of the commercial DBMS. We explain the functional architecture of the multimedia DBMS agent, implementation technology on the ATM network environment, and the result of performance analysis.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.613-621
• /
• 2016

This research connected network equipment, including CCTV, PAGA, IP-PBX, and Legacy, in order to enable the operation and configuration of internal IP-based network equipment in maritime plants and vessels, both in the field and from remote places, and to allow for the support of remotely controlling such equipment. It also realized an operating program for the integrated network equipment management system to enable the monitoring and control of equipment status, operation condition, and notifications from distant places. By applying the operating program to satellite stations and vessels sailing on the sea, a performance test was conducted to evaluate data loss and transmission/reception delay in the communication section between the land and vessels. As a result, this research verified the normal operation of CCTV control and of real-time monitoring and control of the network equipment, including PAGA, IP-PBX, and Legacy under the FBB and MVSAT environments. It was observed that the transmission of CCTV video images with a large volume of data as well as the transmission and reception of voice data were found to be slightly delayed, indicating the need to develop technology to compress and convert data for real-time transmission and reception.

• Journal of Korea Water Resources Association
• /
• v.41 no.8
• /
• pp.855-862
• /
• 2008

Surface Image Velocimetry (SIV) is an instrument to measure water surface velocity by using image processing techniques. To improve its measuring accuracy, it is essential to get high quality images with low skewness. A truck-mounted SIV system would be a good way to get images, since its crane gives high altitude to the images. However, the images taken with a truck-mounted SIV would be swayed due to the movement of crane and the camera by winds. In that case, to analyze the images, it is necessary to compensate the side sway in the images. The present study is to develop an algorithm to analyze the swayed images by combining common image processing techniques and coordinate transform techniques. The system follows the traces of some selected fixed points and calculates the displacements of the video camera. By subtracting the average velocity of the fixed points from that of grid points, the velocity fields of the flow can be corrected. To evaluate the system's performance, two image sets were used, one image set without side sway and another set with side sway. The comparison of their results showed very close with the error of around 6 %.

• The KIPS Transactions:PartC
• /
• v.12C no.6 s.102
• /
• pp.881-890
• /
• 2005

Over for the past 10 years, the increase in geometric progression for the internet traffic, has allowed the IP protocol framework to be the most important network technology. In addition, the internet service is being developed as a service mode differentiated, aiming to support the new-mode real-time multimedia services such as internet phone, video conference, cyber reality, and internet game, focusing on offering a latest service. These days, aiming to solve the need for broad bandwidth along with guaranteeing QoS, the WDM technology of offering multiple gigabit wavelengths is emerging as the core technology of next-generation optical internet backbone network. In the next-generation optical internet backbone network based on WDM, the QoS framework is one of fore subjects aiming to offer a service of guaranteeing QoS This study analyzes the requirements of performance related to QoS framework in IP Subnet and in WDM optical backbone network, and suggests optical QoS service framework differentiated. in order to guarantee end-to-end QoS through the next-generation optical internet backbone network, using GMPLS control protocol.