• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.9
• /
• pp.1-6
• /
• 2010

H.264 video coding standard is widely used due to the high compression rate and quality. H.264 decoders usually have pipeline architecture by a macroblock or a $4{\times}4$ sub-block. The period of the pipeline is usually fixed to guarantee the operation in the worst case which results in many idle cycles and the requirement of high data bandwidth and high performance processing units. We propose adaptive pipeline architecture for H.264 decoders for efficient decoding and lower the requirement of the bandwidth for the memory bus. Parameters and coefficients are delivered using hand-shaking communication through dedicated interconnections and frame pixel data are transferred using AMBA AHB network. The processing time of each block is variable depending on the characteristics of images, and the processing units start to work whenever they are ready. An H.264 decoder is designed and implemented using the proposed architecture to verify the operation using an FPGA.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.3
• /
• pp.47-61
• /
• 2012

parallel transmitting system with channel bonding method have been proposed to transmit mass content such as UHD(Ultra High Definition) in HFC(Hybrid Fiber Coaxial) networks. However, this system may lead to channel resource problem because the system needs many channels to transmit mass content. In this paper, we analyze three effective bandwidth approximation algorithms to use the bonding channel efficiently. These algorithms are the effective bandwidth of Gaussian approximation method algorithm proposed by Guerin, the effective bandwidth based on statistics of video frames proposed by Lee and the effective bandwidth based on Gaussian traffic proposed by Nagarajan. We also evaluate compatibility of algorithms to the mass broadcasting service. OPNET simulator is used to evaluate the performance of the algorithms. For accuracy of simulation, we make mass source from real HD broadcasting stream.

• Animal cells and systems
• /
• v.2 no.4
• /
• pp.477-481
• /
• 1998

Previous studies have postulated that isometric animals exert similar locomotory capacity (speed, distance) because the amount of energy available for the motion would be the same regardless of body mass (m). To test propriety of this theory, we examined body shape and take-off potential of two frog species, Rana nigromaculata (powerful jumpers) and Bombina orientalis (slow hoppers). Morphological measurements included thigh muscle mass (indicative of total muscle force), hindlimb length (L, determining acceleration distance), and interilial width (shaping take-off motion). To gauge locomotory capacity, take-off speed (v) and take-off angle ($\theta$) were measured from video analyses, and jump distance (R) and take-off Power ($P_{t}$ ) were calculated from equations $R=V^{2}sin2\theta/g$ and ($P_{t}$＝$㎷^{3}/2L$(where g is the gravitational constant). Scaling exponents of morphometric variables for both species were 0.96-1.11 for thigh muscle mass, 0.28-0.29 for hindlimb length, and 0.30-0.36 for interilial width. Scaling exponents of locomotory performance for the two species were -0.01-0.14 for take-off speed, 0.24-0.31 for jump distance, and 0.66-0.84 for take-off power. The results demonstrate that the frogs of this study showed isometric body shape within species, but that take-off response changed allometrically with body mass, indicating that these data did not fully support the previous proposition. An exception was found in take-off speed of B. orientalis, in which the speed changed little with body mass (slope＝-0.01). These findings suggest that the energy availability approach did not properly explain the apparent allometric relations of the take-off response in these animals and that an alternative model such as a power production approach may be worth addressing.

• The Journal of Korean Association of Computer Education
• /
• v.19 no.4
• /
• pp.45-58
• /
• 2016

This paper tried to analyze cases of one year team-based project of gifted students who spent two year programs in a math-IT integrated class as part of formative evaluation and extracted the factors associated with future enhancement for the program. The researcher as an advisory professor tried to guide the students as minimally as possible considering their levels of IT skills so that they could self-directedly perform the IT-fused project on a team basis. The data collection included documents, annual report, photos, video, artifacts and interview data with the students for the whole team project carried out between February and December, 2015. The overall pattern of the project activities has been stabilized in the middle of the course compared to the initial stages of brainstorming and design work even though the students revealed the differences of their programming skills and preferences toward the project theme. Their project outcomes were qualitatively analyzed according to the 9 steps of R&E model and has shown individual differences according to low, middle and high level. At the end, the analysis suggested several implications for further improvement of the mentorship program.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.6
• /
• pp.692-702
• /
• 2001

In this paper, a new block-matching algorithm for standard video encoder is proposed. The algorithm finds a motion vector using the increasing SAD transition curve for each predefined candidates, not a coarse-to-fine approach as a conventional method. To remove low-probability candidates at the early stage of accumulation, a dispersed accumulation matrix is also proposed. This matrix guarantees high-linearity to the SAD transition curve. Therefore, base on this method, we present a new fast block-matching algorithm with the slice competition technique. The Candidate Selection Step and the Candidate Competition Step makes an out-performance model that considerably reduces computational power and not to be trapped into local minima. The computational power is reduced by 10%~70% than that of the conventional BMAs. Regarding computational time, an 18%~35% reduction was achieved by the proposed algorithm. Finally, the average MAD is always low in various bit-streams. The results were also very similar to the MAD of the full search block-matching algorithm.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.12
• /
• pp.167-173
• /
• 2015

This paper presents a study on the Full-HD HEVC(High Efficiency Video Coding) encoder IP(Intellectual Property) design. The designed IP is for HEVC main profile 4.1, and performs encoding with a speed of 60 fps of full high definition. Before hardware and software design, overall reference model was developed with C language, and we proposed a parallel processing architecture for low-power consumption. And also we coded firmware and driver programs relating IP. The platform for verification of developed IP was developed, and we verified function and performance for various pictures under several encoding conditions by implementing designed IP to FPGA board. Compared to HM-13.0, about 35% decrease in bit-rate under same PSNR was achieved, and about 25% decrease in power consumption under low-power mode was performed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.25-31
• /
• 2015

In this paper, we propose PEP based on cross-layer and network coding in digital video broadcasting-return channel via satellite (DVB-RCS) networks. In particular, we propose not only a scheme of cross-layer information exchange for interaction between TCP and the resource allocation (RA) scheme in the link layer but also a tuning algorithm for the TCP contention window (CWND) by using information on the RA in the link layer and the redundancy rate for network-coded packets. The simulation results show that TCP CWND can be adjusted by RA information in the proposed protocol. Furthermore, through the transmission of network-coded packets and the proposed CWND tuning algorithm, TCP throughput is enhanced in lossy environment due to user mobility without the unnecessary resource overhead.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.49 no.4
• /
• pp.62-70
• /
• 2012

In this paper, we propose the gunnery detection method based on reference frame modeling and frame difference method. The frame difference method is basic method in target detection, and it's applicable to the detection of moving targets. The goal of proposed method is the detection of gunnery target which has huge variation of energy and size in the time domain. So, proposed method is based on frame difference, and it guarantee real-time processing and high detection performance. In the method of frame difference, it's important to generate reference frame. In the proposed method, reference frame is modeled and updated in real time processing using statistical values for each pixels. We performed the simulation on 73 IR video data that has gunnery targets, and the experimental results showed that the proposed method has 95.7% detection ratio under condition that false alarm is 1 per hour.

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.156-162
• /
• 2013

In the communication between satellite and ground station, data rate can be determined from the data volume and required transmission time. Increasing data rate can be limited according to the available bandwidth. For the reason, it has been popularly studying on high spectral-efficient modulation scheme in large volume data application such as digital video broadcasting service. This paper presents the conceptual design of UHRIT broadcasting in GEO-KOMPSAT-2A (GK2A) mission by using DVB-S2 standard. Based on the recently determined data rate, UHRIT bandwidth was calculated at the various modulation schemes and code rates of DVB-S2 standard. Receiving performance of global user station was also evaluated thorough link analysis by considering that user station is located at the edge of beam coverage. Finally, maximum data rate was analyzed in a situation that COMS HRIT bandwidth should be alternatively applied for UHRIT downlink.

• Women's Health Nursing
• /
• v.10 no.4
• /
• pp.301-310
• /
• 2004

Purpose: The purpose of this study was to develop an exercise program for postmastectomy patients. Method: This study was conducted from October, 2003 to June, 2004. The exercise program was developed based on literature review and needs assessment using focus group interviews. The subjects for the focus group interview consisted of 11 patients, 13 recovering patients, and 20 nurses from 3 hospitals. Development of the program was proceeded with analysusm design and development steps. Result: The results of the needs assessment using the focus group interview showed that the exercise program was imperative for postmastectomy patients. Based on the results, a home video tape containing 3 steps, was developed. Each step includes warming-up, stretching, the main exercise, and cool-down. Steps 2 and 3 include exercises with an elastic band, and an elastic ball. The program was modified after conducting a pre-test. A self-checklist including shoulder mobility, hand strength, arm volume and subjective comments on how they feel will be used before and after the exercise program. Conclusion: The exercise program will improve breast cancer patients' quality of life and their physical well-being. Further studies are recommended to test the effectiveness of the exercise program.