• International Journal of Advanced Culture Technology
• /
• v.6 no.2
• /
• pp.43-50
• /
• 2018

In this study, It is utilized 103 management panic data about social enterprises in Chungnam area (Chungnam, Daejeon, Sejong) region from 2011 to 2017. The organizational characteristics (organizational type, type of certification, company's region, external grants, paid employees) were set as independent variables with economic performance (sales) and social performance (employment of vulnerable class) as dependent variables. We analyzed the factors affecting the economic and social performance of social enterprises and confirmed the correlation between economic and social performance. The results of this study are as follows: First, the organizational characteristics of social enterprises showed a significant difference in sales as economic performance. External grants have no positive effect on the economic performance (sales) of social enterprises, while paid workers have a positive (+) influence on the economic performance. Second, the organizational characteristics of social enterprises showed significant differences in employment of the vulnerable class, which is social performance. Only the paid workers had a statistically significant relationship with the social performance of the social enterprise. Third, the correlation between economic performance (sales) and social performance (employment of the vulnerable class), which is the result of social enterprise, is shown. This can enhance a social enterprises' sustainable growth and self-sufficiency by improving the employment of vulnerable people, the economic performance of a social enterprise, which is sales and social performance, and ultimately can manifest the value and purpose of the social enterprise.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1A
• /
• pp.18-25
• /
• 2002

In this paper, the performance of three types of serial concatenated convolutional codes (SCCC) in AWGN (additive white Gaussian noise) channel is compared and analyzed. As results of simulations, it can be observed that Type I shows the best error performance at lower signal-to-noise ratio (SNR) region. However, Type III shows the best error performance at higher SNR region. It can be also observed the error floor that the performance cannot be improved even though increasing of the number of iterations and SNR at Type I. However, the performance of Type II and Type III are still improved over the five iterations at higher SNR without error floor. And BER performance of three types can be closed to upper bound of three types with increase of SNR. It can be also observed that the upper bound of Type III shows the best performance among the three types due to the greatest free distance.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.2
• /
• pp.23-32
• /
• 2019

PVT (Photovoltaic/thermal) system is technology that combines PV and solar thermal collector to produce and use both solar heat and electricity. PVT has the advantage that the energy production per unit area is higher than any single use of PV or solar thermal energy systems because it can produce and use heat and electricity simultaneously. Air-type PVT collectors use air as the heat transfer medium, and the air flow rate and flow pattern are important factors affecting the performance of the PVT collector. In this study, a new air-type PVT collector with improved thermal performance was designed and manufactured. And then thermal and electrical performance and characteristics of air-type PVT collector were analyzed through experiments. For the thermal performance analysis of the PVT collector, the experiment was conducted under the test conditions of ISO 9806:2017 and the electrical performance was analyzed under the same conditions. As a result, the thermal efficiency increased to 26~45% as the inlet flow rate of PVT collector increased from $60{\sim}200m^3/h$. Also, it was confirmed that the air-type PVT collector prevents the PV surface temperature rise according to the operating conditions.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.357-360
• /
• 2005

Domestic enterprises are surveyed and analyzed to find the empirical relationship between environmental characteristics and electronic commerce(EC) performance. Dynamism, hostility and heterogeneity are selected as environmental characteristics. EC performance is articulated as EC utilization, EC satisfaction and EC usefulness. Empirical test presents that dynamism has a statistically significant relationship with EC performance except EC usefulness, but hostility and heterogeneity have no statistically significant relationship with EC performance. The impact of industry type on environmental characteristics and EC performance is also tested.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.3
• /
• pp.99-105
• /
• 2007

Currently, BLDC fuel pump was applied on LPi vehicle using 3rd fuel supply system as liquified phase LPG injection method had already shown better performance than others. Its cost, however, is rather expensive because of drawbacks such as complicated structure, a fault of localization of system. In this work, demonstration system for a developed turbine type fuel pump to replace BLDC system was setup and investigated. This study results that fuel mass flow rate of turbine type pump and injection performance of injector were better compared to BLDC type. Comparing flow rate of summer LPG with that of winter LPG, the flow rate decreased about 25% using winter LPG. Performance applying turbine type LPi fuel pump to engine is confirmed.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.23 no.1
• /
• pp.118-130
• /
• 2017

Purpose: The purpose of this study was to identify the relationship between the satisfaction with clinical practice and clinical performance ability by types of self-directed learning ability of nursing students. Methods: This was a triangular study that was conducted to understand clinical performance ability. The subjects were 260 junior and senior students from a university in P city. The data were collected from April 22 to December 30, 2015. Data were collected by Q-card, Q-block an assessment tool, a structured self-reporting survey and a questionnaire. Results: We classified the self-directed learning abilities into four types: Type 1: a self-reflective person; Type 2: a person who prepares for the future; Type 3: a person with a sense of responsibility and obligation; and Type 4: an enthusiastic learner. We found that clinical performance ability was higher for Type 4 than Type 3. We found that clinical performance satisfaction with clinical practice was also higher for the Type 4 individual than a Type 3 person. Conclusion: To improve students' clinical performance ability, we need plans and support to lead students toward becoming an 'enthusiastic learner' type of person with self-directed learning ability. It is necessary to increase students' satisfaction with clinical practice.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.6
• /
• pp.83-91
• /
• 2019

Photovoltaic thermal (PVT) collectors are devices that simultaneously produce electricity and heat. Research on conventional air-type PVT collector focuses on installing baffles to enhance the collector's thermal performance. However, the baffles have pressure drop inside the collector which degrades the thermal performance. Thus, it is necessary to design baffles to smoothen the flow inside the air-type PVT collector. Alternatively, installing perforated baffles in air-type PVT collectors can reduce the collector weight, but parameters such as the diameter of the perforated holes and the height of the perforated plates should be considered. Therefore, the main aim of this study was to analyze thermal characteristics of each variable of perforated baffles installed inside air-type PVT collector. For this purpose, the uniformity of air flow in the collector was compared through NX program, and the resultant heat gain and thermal efficiency of the air-type PVT collector were compared and analyzed. Therefore, the main aim of this study was to analyze thermal characteristics of each variable (Baffle angle, length, height, pitch, perforated ratio) of perforated baffles installed inside air-type PVT collector. For this purpose, the uniformity of air flow in the collector was compared through CFD program, and the resultant heat gain and thermal efficiency of the air-type PVT collector were compared and analyzed. As a result, the maximum outlet temperature was increased by 1.45 times and the heat gain was increased by 193.8 Wth, depending on the perforated baffle plate, compared to the collector without the baffle. The heat transfer performance showed that the maximum internal velocity was 1.61 times higher and the Reynolds number was 1.06 times higher depending on the parameters of the baffle plate.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.3 s.174
• /
• pp.691-700
• /
• 2000

This paper presents a novel type of a semiactive damper featuring an electro-rheological(ER) fluid. Unlike conventional cylindrical ER damper, the proposed one has controllable orifices by the intensity of electric fields (We call it orifice type). The dynamic model of the orifice type ER damper is formulated by incorporating field-dependent Bingham properties of an arabic gum-based ER fluid. Design parameters such as electrode gap are subsequently determined on the basis of the dynamic model. After manufacturing the orifice type ER damper, field-dependent damping forces and damping force controllability are empirically evaluated. In the evaluation procedure, conventional cylindrical ER damper is adopted and its performance characteristics are compared with those of the orifice type ER damper. In addition, the proposed one is installed with a full-car model and its vibration control performance associated with a skyhook controller is investigated.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.774-779
• /
• 2009

The purpose of this research is to develop the high performance of solar chemical reactor for producing hydrogen by methane reforming reaction with steam. Two shape of chemical reactor is suggested: first type is filled with porous material and second type is spiral type. These reactors is installed on the dish-type thermal system of Inha University, Inha Dish-1. Performance analysis of these two reactors is conducted from getting methane conversion.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.292-296
• /
• 2002

In the present investigation, the improvement of processing efficiency in the high speed machining of GC250 is explored. This study is to evaluate the tool performance in difficult-to-material using the new developed tool. Tool performance evaluation are conducted by tool wear, surface roughness, chattering in machined surface. The tool wear of A type was smaller than B type. In type B tool the chatter mark was observed in machined surface. The good surface roughness was obtained in type A tool. Consequently, the tool performance of A type is better than B type.