• 신재생에너지
• /
• 제3권1호
• /
• pp.60-67
• /
• 2007

Catalyst coated membrane [CCM] type and catalyst coated substrate [CCS] type of membrane electrode assembly [MEA] were manufactured and evaluated their performance. Degradation test were conducted to find the difference of long term stability in two types of MEA and the factor for performance degradation problem occurred. Performance degradation test of single cell in two different types of MEA were carried out when current density was $200mA/cm^{2}$. The degradation test had proceeded for 230 hours and performance degradation was checked by I-V curve and impedance measurement at regular intervals. Also, MEA before/after operation and changes of catalyst layer were characterized by SEM, TEM, and XRD. Maximum power density of CCM type was higher than that of CCS type. Meanwhile, an increase of particle size of catalyst and an increase of impedance resistance after long term operation were observed. In the case of using CCM type MEA, the performance was deteriorated 38% of initial performance. In the case of using CCS type MEA, the performance was deteriorated 43% of initial performance. In consideration of difference of initial performance, performance of CCM type is higher than that of CCS type but both types had similar problems during degradation test.

• 여성건강간호학회지
• /
• 제11권2호
• /
• pp.169-175
• /
• 2005

Purpose: This study was designed to investigate the relationships of the types of nurse staffing, the competency of nursing performance and job satisfaction by analyzing the types of nurse staffing in operating room. Method: The subjects were 472 nurses who work in operating room. The instruments used in this study were three tools: competency of nursing performance, job satisfaction and type of nurse staffing. Result: Type 4 was most in the type of nurse staffing of the subjects. According to the type of nurse staffing, the competency of nursing performance was significantly different. There was significant difference in the competency of nursing performance according to age, marital status, bachelor, employ, position, and career, and job satisfaction according to age, position, and career. In opinion about the ideal type of nurse staffing, type 2 was most regardless of career. Conclusion: Type 4 which has lower competency of nursing performance was adopted in many hospitals now but, type 2 which has highest competency of nursing performance was selected by many nurses as the best one. So, it should be considered the type of nurse staffing of in operating room and change it.

• 제어로봇시스템학회논문지
• /
• 제17권4호
• /
• pp.388-396
• /
• 2011

Sun tracking system is the most important subsystem in parabolic dish type solar thermal power plant, since it determines the amount of thermal energy to be collected, thus affects the efficiency of solar thermal power plant most significantly. Various types of sun tracking systems are currently used. Among them, use of photo sensors to located the sun(which is called sensor type) and use of astronomical algorithm to compute the sun position(which is called program type) are two of the mostly used methods. Recently some uses CCD sensor, like CCD camera, which is called image processing type sun tracking system. This work is concerned with the analysis of sun tracking performance of various types of sun tracking systems currently used in the parabolic dish type solar thermal power plant. We first developed a sun tracking error measurement system. Then, we evaluate the performance of five different types of sun tracking systems, sensor type, program type, hybrid type(use of sensor and computed sun position simultaneously), tracking error compensated program type and image processing type. Experimentally obtained data shows that the tracking error compensated program type sun tracking system is very effective and could provide a good sun tracking performance. Also the data obtained shows that the performance of sensor type sun tracking system is being affected by the cloud significantly, while the performance of a program type sun tracking system is being affected by the sun tracking system's mechanical and installation errors very much. Finally image processing type sun tracking system can provide accurate sun tracking performance, but costs more and requires more computational time.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.324-330
• /
• 2005

For axial-type turbines which operate at partial admission, a performance prediction model is developed. In this study, losses generated within the turbine are classified to windage loss, expansion loss and mixing loss. The developed loss model is compared with experimental results. Particularly, if a turbine operates at a very low partial admission rate, a circular-type nozzle is more efficient than a rectangular-type nozzle. For this case, a performance prediction model is developed and an experiment is conducted with the circular-type nozzle. The predicted result is compared with the measured performance, and the developed model quite well agrees with the experimental results. So the developed model could be applied to predict the performance of axial-type turbines which operate at various partial admission rates or with different nozzle shape.

• 한국유체기계학회 논문집
• /
• 제9권4호
• /
• pp.13-19
• /
• 2006

For axial-type turbines which operate at partial admission, a performance prediction model is developed. In this study, losses generated within the turbine are classified to windage loss, expansion loss and mixing loss. The developed loss model is compared with experimental results. Particularly, if a turbine operates at a very low partial admission rate, a circular-type nozzle is more efficient than a rectangular-type nozzle. For this case, a performance prediction model is developed and an experiment is conducted with the circular-type nozzle. The predicted result is compared with the measured performance, and the developed model quite well agrees with the experimental results. So the developed model could be applied to predict the performance of axial-type turbines which operate at various partial admission rates or with different nozzle shape.

• 한국중재학회지:중재연구
• /
• 제27권1호
• /
• pp.161-182
• /
• 2017

The purpose of this study is to investigate the factors of conflict formation, conflict resolution type, and relationship performance between convenience store franchise headquarters and franchise stores operated by the franchise system located in the metropolitan area. The conclusion could be summarized as follows. First, according to factor analysis based on the previous research, the factor of conflict between convenience store headquarters and franchisee was tied to three factors such as goal disagreement, doctrinal discrepancy, and interdependence, whereas conflict resolution type was linked to three factors such as cooperation type, attack type, and avoidance type. Finally, the relationship performance is tied to three factors: financial performance, long-term cooperation, and non-financial performance. Second, as a result of Hypothesis 1, the interdependence was positively correlated when the cooperative type was the dependent variable. The target discrepancy was significantly positive(+) when the aggressive type was the dependent variable. The interdependence was significantly negative(-) when the avoidance type was the dependent variable. There also was a significantly positive(+) relationship in the target disagreement. Third, for Hypothesis 2, it is shown that target inconsistency is negative(-) for all cases where financial performance, long-term cooperation, and non-financial performance are dependent variables. Fourth, for Hypothesis 3, when the financial performance is the dependent variable, only the cooperative type shows a positive(+) relationship. On the other hand, when the long-term cooperation and the non-financial aptitude are the dependent variables, the cooperative type has a significant positive(+) relationship.

• 동력기계공학회지
• /
• 제10권4호
• /
• pp.65-70
• /
• 2006

This study is to experimentally evaluate the cooling performance of the Bonding type and Injection type of heat sink using three different kinds of industrial Peltier module by digital LabViewTM measurement. Injection type of heat sink could be more efficient for the heat transfer than Bonding type, even with 30% more radiating surface area. In addition, the experimental results revealed that the sufficient power supplied was able to show the better cooling performance of Peltier module. In order to verify the optimal cooling performance of the cooling device, two Peltier module, HMN 6040 and HMN 1550 with Bonding and Injection type of heat sink were used. The cooling performance with injection type of heat sink was 2.11% and 6.24% better than that with bonding type of heat sink under the HMN 6040 and HMN 1550, respectively.

• 한국실내디자인학회논문집
• /
• 제15권2호
• /
• pp.127-137
• /
• 2006

In the viewing of public performance arts, it needs to make space construction appropriate for performance purposes, because the section type has an effect on audience's inspection. Therefore, this study researches the intentional characteristics and comprehends the relationship between correlation factors to influence on section type of audience space in performance facilities. In addition to, this study comes under fundamental research to propose the course of standard plan, accord with diverse requirement, in the special performance facilities which will be built up. The results as following; 1) The factors that influence the section type of the audience's space in performing facilities are divided as two elements. The first element is construction of space, viewing environment, and the second element is visual characteristic, and acoustic characteristic. 2) The section type are classified as six types, A-type(Flated type), B-type(Sloped type), C-type(Gabled type), D-type(Arched type), E-type(Reverse arched type), and F-type(Reverse sloped type). 3) Characteristics are deduced by the section type, construction of space and viewing environment are restricted by the characteristics of the section type.

• 전기학회논문지
• /
• 제64권7호
• /
• pp.1012-1018
• /
• 2015

The studies on the operating performance analysis or design about the fixed tilt angle flat-plate photovoltaic (PV) system are still lively going off. However the operating property analysis about the arch type PV system which means PV array were designed as round type is dissatisfied. In this paper, we theoretically established the factors which are cause of the deterioration in performance of arch type PV system. In addition, we use the Solar Pro simulation tools to design both flat-plate type and arch type 30kW PV systems. The simulations about arch type PV system applied two ways such as central inverter and string inverter were conducted. The performance ratio (PR) of the PV system with flat-plate type shows the highest value 74[%] when the tilt angle is 30°. In case of arch type, when applying central inverter method, PR value shows approximately 73[%] and no more difference with arch type of the PV array. This value shows 1[%] decrease compare with the flat-plate type. However when applying string inverter methods, the average PR value shows 80 % and 6% improved than the central inverter method.

• 디지털융복합연구
• /
• 제14권11호
• /
• pp.333-345
• /
• 2016

이 연구의 목적은 간호사의 DISC성격유형, 자기효능감, 임상수행능력사이의 관계를 규명하기 위함이다. 자료는 K시의 5개 병원에 근무하는 302명의 간호사로부터 수집하였다. 기술통계, t-test, ANOVA, 피어슨 상관관계 분석을 이용하여 분석하였다. 자기효능감과 임상수행능력은 D형이 I형과 S형보다 더 높음을 나타냈다. 임상수행능력의 하위 영역에서는 간호과정, 간호기술, 전문직발전에서 D유형이 S유형보다 높았고, 자기효능감에서도 D유형이 I유형과 S유형보다 높았다. DISC 유형별 자기효능감과 임상수행능력은 I 유형 (r = .66, p<.01), S 유형 (r = .60, p<. 01), D유형(r =.56, p<.01), C 유형 (r = .52, p<.01)으로 양의 상관관계를 나타냈다. D유형에서 대인관계/의사소통이 가장 낮은 상관관계를 보였으며, I유형과 S유형에서는 교육/협력관계가 가장 낮았다. C유형에서는 간호기술이 가장 높고, 간호과정이 가장 낮았다. 본 연구결과를 특성별 교육 프로그램이나 간호사 부서 배치에 활용한다면 효과적인 업무수행 결과를 가져올 수 있으리라 사료된다.