• Journal of Broadcast Engineering
• /
• v.13 no.4
• /
• pp.501-515
• /
• 2008

Recently, as users' requests for high quality mobile multimedia services are rapidly increasing and additional bandwidth can be provided by adopting the hierarchical modulation transmission technology, the research on the Advanced Terrestrial DMB (AT-DMB) service using the SVC (Scalable Video Coding) scheme is being actively studied. But, in order to realize a compatible video service and to accelerate the successful standardization and commercialization, it is necessary to simplify the compatible encoder structure. In this parer, we propose a fast mode decision method by constraining the redundant coding modes in the spatial scalable encoder that keeps the current T-DMB video in base layer. The proposed method is based on the statistical characteristics of each coding mode at both base and enhancement layers, inter-layer predictions, which are derived by investigating macroblock-layer coding modes of the spatial scalable encoder's functional structure. Through computer simulations, it is shown that a simplified encoder model that reduces the heavy computational burden can be found, while keeping the objective visual quality very high.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.681-687
• /
• 2014

The objective of this work presented here was focused on analysis of in-cylinder combustion characteristic, engine performance, and nitrogen oxides emission characteristic from marine gas oil for propulsion diesel engine of naval vessels and biodiesel with fuel injection timing in a single cylinder diesel engine. In addition, combustion process was analyzed with a high speed camera of marine gas oil and biodiesel fuel. Retarding the fuel injection timing from $BTDC25^{\circ}CA$ to $BTDC5^{\circ}CA$, in cylinder peak combustion pressure was gradually decreased, however, engine torque showed a tendency to increase. The highest nitrogen oxides level was measured at $BTDC15^{\circ}CA$, they were reduced at retarded and advanced condition on the basis of $BTDC15^{\circ}CA$. Comparing with combustion process of marine gas oil and biodiesel fuel at $BTDC5^{\circ}CA$, self-ignition timing of biodiesel fuel included oxygen content was faster than marine gas oil, however, a cautious observation indicates a slightly higher flame intensity for marin gas oil than biodiesel as a diffusion flame is developing.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.5
• /
• pp.429-436
• /
• 2016

Because of the shortage of construction workers due to The rising labor costs and an aging labor force, construction time has been extended. As a solution, The construction time of high-rise buildings can be reduced by adopting precast concrete construction methods. Most relevant studies have focused on the development and structural analysis of such methods and not on their construction management. Therefore, this study focused on the construction management of the hollow precast concrete column (HPC) method. The objective of this study was to evaluate the performance of HPC formulations through the analytic hierarchy process and benefit-cost analysis. After a gap analysis of the available literature and expert interviews, the evaluation criteria were selected. A questionnaire survey was administered to professionals with ample experience in precast concrete construction for the pair-wise evaluation of the benefit and costs of the HPC method. The results show that the benefits of the HPC method outweighed its costs. Therefore, the HPC method is a suitable substitute for the half-slab method.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.613-618
• /
• 2006

Crack in Pavements have been continually increased aby water penetration Therefore, the cracks can result in deterioration of the pavements that could be extremely dangerous fro road users. Creak sealing work performed in outdoor is very dangerous, costly and labor intensive. To slove these problems, automated crack sealing systems have been developed. it Would be needed that work information related to crack sealing must be gathered in an effort to used for existing or future crack sealing work. Furthermore, work information related to crack sealing could be utilized in analyzing work productivity and condition. The primary objective of this study is to propose a PDA and Web-based system for work information management of crack sealing which enables to effectively interchange work information between head office and fieds, and to accurately collect work information. Finally, it is anticipated that the effective use of the developed PDA and web-based system would be able to effectively share work information, measure productivity, estimate costs as well as plan future work schedule.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.286-299
• /
• 2017

The Korean performing arts has been facing stagnation due to oversupply, lack of effective distribution system, and insufficient business models. In order to overcome these difficulties, it is necessary to improve the efficiency and accuracy of marketing by using more objective market data, and to secure audience development and loyalty. This study considers the viewpoint that 'Big Data' could provide more general and accurate statistics and could ultimately promote tailoring services for performances. We examine the first case of Big Data analysis conducted by a credit card company as well as Big Data's characteristics, analytical techniques, and the theoretical background of performing arts consumer analysis. The purpose of this study is to identify the meaning and limitations of the analysis case on performing arts by Big Data and to overcome these limitations. As a result of the case study, incompleteness of credit card data for performance buyers, limits of verification of existing theory, low utilization, consumer propensity and limit of analysis of purchase driver were derived. In addition, as a solution to overcome these problems, it is possible to identify genre and performances, and to collect qualitative information, such as prospectors information, that can identify trends and purchase factors.combination with surveys, and purchase motives through mashups with social data. This research is ultimately the starting point of how the study of performing arts consumers should be done in the Big Data era and what changes should be sought. Based on our research results, we expect more concrete qualitative analysis cases for the development of audiences, and continue developing solutions for Big Data analysis and processing that accurately represent the performing arts market.

• Journal of Animal Science and Technology
• /
• v.48 no.3
• /
• pp.467-478
• /
• 2006

Maintenance of an optimal air quality in the enclosed pig building is potentially important in terms of pig performance and farmer health. The objective of this on-site experiment is to evaluate and compare efficiencies of currently utilized biological additives to reduce odor emissions from the enclosed pig building. As a result, generally all the additives except for salt water, artificial spice and essential oil were proved ineffective in reducing odor generation. The beneficial effects of salt water, artificial spice and essential oil on odor reduction were highlighted on ammonia, odor intensity and offensiveness, and sulfuric odorous compounds, respectively. To efficiently utilize odor masking agent such as the artificial spice, ventilation rate should keep slightly lower than the optimal level. Essential oil functioned well as not only masking agent but also antimicrobial agent for reducing odor. To precisely quantify odor concentration, it should be measured by not the odor sensor but the olfactometry technique.

• Journal of Engineering Education Research
• /
• v.11 no.1
• /
• pp.64-75
• /
• 2008

A new product development and product realization process (PRP) is a circulating and feedback process by generating ideas through creative problem solving process. The early stages of PRP correspond to conceptual design and product development, in which a large portion of product life cycle cost can be saved. The optimal design method for this stage is a robust design suggested by Taguchi. Quality must be 'engineered in' since it can not be 'inspected out.' A robust design is an engineering methodology to improve the quality of a product by minimizing the efforts of variations without eliminating the causes. The objective of this study is to propose a scheme and a case study of robust design for exploring design parameters, and introduce a creative problem solving process. Major research subjects include a creative problem solving process, robust design procedure and their implementation. For the experiment of Taguchi method, a toy catapult is adopted. For the creativity development, a short project is assigned to devise a similar tool with the toy catapult. A reference model is suggested to compare and evaluate their ideas.

• Korean Journal of Applied Biomechanics
• /
• v.26 no.3
• /
• pp.315-321
• /
• 2016

Objective: The aim of this study was to analyze effects of the toe-spring angle of bobsleigh shoes on start speed lap time to develop Korean-specific bobsled shoes suitable for winter environments and for domestic players on the basis of sports science and optimized biomechanical performance. Method: Seven Korean bobsleigh athletes participated in this study, with three pairs of sprint spikes from three companies (Type A, Type B, Type C). To analyze sprint lap time and forefoot bending angle for each shoe, participants were instructed to drag a sled 15 meters from the start line at a maximum sprint. forefoot bending angle was collected by a high speed camera, and lap time speed was measured. Results: Lap time for type B shoes was $3.52{\pm}0.17sec$, type A was $3.55{\pm}0.19sec$, and type C was $3.56{\pm}0.18sec$. Forefoot bending angles were: angle 1, $6.88{\pm}5.55^{\circ}$; angle 2, $9.23{\pm}6.38^{\circ}$; angle 3, $15.56{\pm}5.39^{\circ}$; angle 4, $9.54{\pm}3.85^{\circ}$; angle 5, $9.22{\pm}5.08^{\circ}$; angle 6, $7.66{\pm}6.44^{\circ}$; and angle 7, $4.30{\pm}6.24^{\circ}$ (p<.001). Forefoot bending in angle 3 was as follows: type A, $16.47{\pm}6.01^{\circ}$; type B, $14.30{\pm}4.96^{\circ}$; and type C, $15.90{\pm}5.17^{\circ}$. Conclusion: Hard outsoles and midsoles are better than soft type for reduced start lap time when developing a prototype Korean bobsled shoe.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.4 s.33
• /
• pp.697-705
• /
• 1997

The conventional preflex beams are designed by the method of paritial prestressing and allow the tensile stresses at the lower concrete of beams. As a consequence, most of preflex beams experience the tensile cracks under the service loads. This study was conducted to develop the most effective preflex beams, which do not allow tensile stress under the service load, by introducing additional prestressing called 'represtressing' at the lower concrete of beams. The objective of the study was accomplished by developing a computer analysis and design program and conducting experiments. Using the developed computer program, standard sections of the represtressed preflex beams were determined by computer modeling. In the experiment, two actual size of represtressed beams were tested under the imitated service loads. The results of test have shown that the performance of the represtressed preflex beams is generally excellent. A remarkable improvement was made in the design of preflex composite beams. Since the represtressed preflex beams(RPF) do not experience the tensile cracks under the service loads, the use of this beam for the bridge structures will lead to easy bridge maintenance and management. Furthermore, due to the low beam depth, high clearance and economical design can be realized in the bridge design using RPF.

• Journal of Preventive Medicine and Public Health
• /
• v.38 no.4
• /
• pp.391-400
• /
• 2005

Objective : This study examined the socioeconomic differentials for the health and health related behaviors among South Korean middle school students. Methods : A nationwide cross-sectional interview survey of 3,449 middle school second-grade students and their parents was conducted using a stratified multi-stage cluster sampling method. The response rate was 93.3%. The socioeconomic position indicators were based on self-reported information from the students and their parents: parental education, father's occupational class, monthly family income, out-of-pocket expenditure for education, housing ownership, educational expectations, educational performance and the perceived economic hardships. The outcome variables that were measured were also based on the self-reported information from the students. The health measures included self-rated health conditions, psychological or mental problems, the feelings of loneliness at school, the overall satisfaction of life and the perceived level of stress. The health related behaviors included were smoking, alcohol drinking, sexual intercourse, violence, bullying and verbal and physical abuse by parents. Results : Socioeconomic differences for the health and health related behaviors were found among the eighth grade boys and girls of South Korea. However, the pattern varied with gender, the socioeconomic position indicators and the outcome measures. The prevalence rates of the overall dissatisfaction with life for both genders differed according to most of the eight socioeconomic position indicators. All the health measures were significantly different according to the perceived economic hardship. However, the socioeconomic differences in the self-rated health conditions and the psychosocial or mental problems were not clear. The students having higher socioeconomic position tended to be a perpetrator of bullying while those students with lower socioeconomic position were more likely to be a victim. Conclusions : The perceived economic hardships predicted the health status among the eighth graders of South Korea. The overall satisfaction of life was associated with the socioeconomic position indicators. Further research efforts are needed to explore the mechanisms on how and why the socioeconomic position affects the health and health related behaviors in this age group.