• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.12
• /
• pp.1204-1211
• /
• 2004

It is difficult to apply a conventional selection guide for diffusers when the diffuser is installed in a perimeter zone, because the air diffusion performance index (ADPI) vs. throw/length (T/L) ratio curve listed in conventional guide does not consider the perimetric heating load through the walls. The objective of this study is to evaluate the effect of the perimetric heating load on the ADPI and propose a selection guide for a proper line diffuser when perimetric heating load exists. The velocity and temperature distributions and the ADPI values are obtained numerically with various heat load ratios and air flow rates. The velocity and temperature distributions and the ADPI values are analyzed by CFD in case of various heat load ratios and air flow rates. Also, ADPI was calculated by those results. The ADPI values by numerical results are compared with an existing experimental data to verify the method for the evaluation of ADPI proposed in a present study. In case of a line diffuser installed at the high side wall, the ADPI decreases according to the increases of the flow rate on every heat load ratio of the present study except 0.75. The ADPI vs. T/L ratio curves have been proposed for the heat load ratios of 0.25, 0.5, 0.75 to guarantee the comport thermal environment when diffusers are installed in perimeter zone.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.3
• /
• pp.203-211
• /
• 2006

Today, Internet covers a world wide range and most appliances of our life are linked to network from enterprise server to household electric appliance. Therefore, the importances of administrable framework that can grasp network state by real-time is increasing day by day. Our objective in this paper is to describe a network weather report framework that monitors network traffic and performance state to report a network situation including traffic status in real-time. We also describe a mobile agent architecture that collects state information in each network segment. The framework could inform a network manager of the network situation. Through the framework. network manager accumulates network data and increases network operating efficiency.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.9
• /
• pp.47-55
• /
• 2010

Linear constraint satisfaction optimization problem is a kind of combinatorial optimization problem involving linearly expressed objective function and complex constraints. Integer programming is known as a very effective technique for such problem but require very much time and memory until finding a suboptimal solution. In this paper, we propose a method to improve the search performance by integrating local search and integer programming. Basically, simple hill-climbing search, which is the simplest form of local search, is used to solve the given problem and integer programming is applied to generate a neighbor solution. In addition, constraint programming is used to generate an initial solution. Through the experimental results using N-Queens maximization problems, we confirmed that the proposed method can produce far better solutions than any other search methods.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.11
• /
• pp.149-157
• /
• 2014

Diabetes is a chronic disease that requires continuous medical care and patient-self management education to prevent acute complications and reduce the risk of long-term complications. The worldwide prevalence and incidence of diabetes mellitus are reached epidemic proportions in most populations. Early detection of diabetes could help to prevent its onset by taking appropriate preventive measures and managing lifestyle. The major objective of this research is to develop an automated decision support system for detection of diabetes using mixture of experts model. The performance of the classification algorithms was compared on the Pima Indians diabetes dataset. The result of this study demonstrated that the mixture of expert model achieved diagnostic accuracies were higher than the other automated diagnostic systems.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.5
• /
• pp.617-623
• /
• 2021

The objective of this study is to simulate valve flow coefficient and flow characteristics such as velocity and pressure distribution for butterfly valve. The size of the valve used in this study is 125A. The range of the valve opening angle was α=15°~70°, and it was changed by 5°. At the range of α=15°~30°, the valve flow coefficient K_𝜐 gradually increased, and after α=30°, it increased rapidly. In the range of α=20°~70°, the pressure change in the -2.9cm~+2.9cm region in the pipe greatly depended on the opening angle and the position within the pipe. However, after +2.9cm, the pressure at the rear end of the valve was shown to depend only on the opening angle. At α=20°, Vortex shedding occurred for the first time at time t=0.25sec and continuously occurred in rear end of the valve over time. After α=45°, in the flow pattern at the rear end of the valve, the upward flow at the lower end of the valve and the flow at the upper end met each other to form a mixed flow. This flow phenomenon was shown to form a more intense mixed flow in the rear end region as the opening angle increased. Vortex flow occurred for the first time at α=15°, and the opening angle increased, the occurrence and disappearance of this flow phenomenon occurred periodically according to the certain flow region. The pattern of the pressure distribution in the region at the rear end of the valve showed a tendency to agree well with the results of the vorticity distribution.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.12
• /
• pp.311-318
• /
• 2021

With the rapid development of the Internet of Things(IoT) technology recently, multi-access edge computing(MEC) is emerged as a next-generation technology for real-time and high-performance services. High mobility of users between MECs with limited service areas is considered one of the issues in the MEC environment. In this paper, we consider a vehicle edge computing(VEC) environment which has a high mobility, and propose a task migration algorithm to decide whether or not to migrate and where to migrate using DQN, as a reinforcement learning method. The objective of the proposed algorithm is to improve the system throughput while satisfying QoS(Quality of Service) requirements by minimizing the difference between queueing delays in vehicle edge computing servers(VECSs). The results show that compared to other algorithms, the proposed algorithm achieves approximately 14-49% better QoS satisfaction and approximately 14-38% lower service blocking rate.

• Korean Journal of Applied Biomechanics
• /
• v.31 no.3
• /
• pp.155-161
• /
• 2021

Objective: There is a lack of studies using the 3D-2D image registration techniques on the mechanism of a shoulder injury for ice hockey players. This study aimed to analyze in vivo 3D glenohumeral joint arthrokinematics in collegiate ice hockey athletes and compare shoulder scaption with or without a hockey stick using the 3D-2D image registration technique. Method: We recruited 12 male elite ice hockey players (age, 19.88 ± 0.65 years). For arthrokinematic analysis of the common shoulder abduction movements of the injury pathogenesis of ice hockey players, participants abducted their dominant arm along the scapular plane and then grabbed a stick using the same motion under C-arm fluoroscopy with 16 frames per second. Computed tomography (CT) scans of the shoulder complex were obtained with a 0.6-mm slice pitch. Data from the humerus translation distances, scapula upward rotation, anterior-posterior tilt, internal to external rotation angles, and scapulohumeral rhythm (SHR) ratio on glenohumeral (GH) joint kinematics were outputted using a MATLAB customized code. Results: The humeral translation in the stick hand compared to the bare hand moved more anterior and more superior until the abduction angle reached 40°. When the GH joint in the stick hand was at the maximal abduction of the scapula, the scapula was externally rotated 2~5° relative to 0°. The SHR ratio relative to the abduction along the scapular plane at 40° indicated a statistically significant difference between the two groups (p < 0.05). Conclusion: With arm loading with the stick, the humeral and scapular kinematics showed a significant correlation in the initial section of the SHR. Although these correlations might be difficult in clinical settings, ice hockey athletes can lead to the movement difference of the scapulohumeral joints with inherent instability.

• Physical Therapy Rehabilitation Science
• /
• v.9 no.4
• /
• pp.261-268
• /
• 2020

Objective: This study was conducted to provide basic data on physical function improvement activities of elderly care facilities by identifying the degree of physical improvement activities of elderly caregivers. Design: Descriptive correlational study. Methods: The instrument of this study consisted of 12 questions on the general characteristics of the subject. For the assessment of improvement in physical function activities, the measuring tool used for the elderly consisted of a total of 20 questions. For data analysis, Pearson's correlation coefficient & Spearman's rho and multiple regression were used. Results: The higher the age of the subjects, the lower their educational background (r=-0.273, p<0.05), and the higher the probability of having a religion (r=-0.258, p<0.05), the more stable the employment type (r=-0.333, p<0.05). The higher the level of education, the higher the monthly income (r=0.187, p<0.01), and the shorter the career (r=-0.204, p<0.05). The more stable employment, the more unstable duty (r=-0.245, p<0.05), and the more unstable work, the higher the monthly income (r=-0.206, p<0.05) and the longer the career, the higher the monthly income (r=0.247, p<0.05). The more stable the employment, the more activities to improve physical function were found (r=0.341, p<0.05), and the more unstable the duty, the more activities to improve physical function were found (r=0.321, p<0.05), and the higher monthly income, the less physical function improvement activities (r=-0.196, p<0.05). Conclusions: It is necessary to provide regular services by a dedicated physical therapist for physical function improvement activities in order to improve the quality of life of the elderly in the future.

• Physical Therapy Rehabilitation Science
• /
• v.9 no.4
• /
• pp.275-280
• /
• 2020

Objective: Compression wear is an external aid which promotes performance and recovery, diminishes muscular microtrauma, reduces muscle fiber recruitment, improves neuromechanics, enhances coordinative activities, and reduces the perceived exertion. The purpose of this study was to investigate the relationship between athletic taping and compression wear on dynamic postural balance in healthy young men. The hypothesis was that the athletic taping and compression wear would affect dynamic postural balance, with athletic taping having a different effect on dynamic postural balance in healthy young adults. Design: Cross-sectional study. Methods: Thirty-seven healthy young men participated in this study. To examine the association between athletic taping and compression wear, 3 clinical measurement tools, including 5 times sit-to-stand (5xSTS), one-leg standing (OLS) test, and Y-balance test (YBT) in 5 different conditions, namely (1) non-supporting, and support with (2) athletic taping, (3) regular compression wear, (4) silicon compression wear, and (5) double-fiber compression wear were used. Results: The distance of the Y-balance test (YBT) on both the dominant and non-dominant sides showed a statistically difference among the 5 supporting conditions (p<0.05). The distance measured via the YBT in the non-support condition was significantly different than that in the other four supporting conditions (p<0.05). However, 5xSTS and OLS were not significantly different in these supporting conditions. Conclusions: The results of this study suggest that athletic taping, silicon compression wear, and double-fiber compression wear were more effective for dynamic balance than non-supporting and regular compression wear.

• Animal Bioscience
• /
• v.34 no.10
• /
• pp.1695-1704
• /
• 2021

Objective: The aim of this work was to assess the effect of ergothioneine (ESH)-enriched mushroom extract on oxidative stability, volatile compounds, and sensory quality of emulsified sausage. Methods: The ESH content was determined by high performance liquid chromatography. The antioxidant activity of Flammulina velutipes (F. velutipes) extract was determined through radical-scavenging activity of 1,1 diphenyl-2-picryl-hydrazyl, 2,2-azinobis (3-ethylbenzothiazoline-6-sulfonic acid) and hydroxyl radicals. Four different groups of emulsified sausage were manufactured: control, no antioxidants; BHA, 0.01% butylated hydroxyanisole; EEME, 0.8% ESH-enriched mushroom (F. velutipes) extract; AE, 0.012% authentic ESH, after storage for 14 days (at 4℃), the quality of sausage including oxidative stability (2-thiobarbituric acid reactive substances and protein carbonyls content), volatile compounds and sensory quality were studied. Results: It was demonstrated that adding ESH-enriched F. velutipes extract to sausage could effectively prevent lipid and protein oxidation, and its efficacy was equivalent with 0.01% BHA. During meat processing, the ESH mainly contributed to the antioxidative activity of F. velutipes extract. The flavor and sensory attributes of emulsified sausage were improved through adding ESH-enriched F. velutipes extract. Conclusion: Accordingly, the extract of F. velutipes contained high-level of ESH and could be a good antioxidant candidate for processed meat production.