• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.2 no.1
• /
• pp.1-7
• /
• 2006

This paper was studied for optimum design of the used vaporizer at a satellite station. Generally, the cold air is created by temperature drop on the vaporizer surface. In addition, the frost creates ice deposit layer, therefore, heat transfer on vaporizer decreases into the adiabatic condition. By this reason, recent vaporizer system is installed as parallel type, and it takes three times of vaporizer capacity. But this vaporizer system requires much installation costs and restricted by some space. It is very important to solve this problem. This study paper is regarding $LN_2$ vaporizer where the utilization increases recently. There are three variable conditions which are used in this study research. First, fin lengths of 4000mm, 6000mm, 8000mm and 0, 4, 8 fin types were applied rut each vaporizer. Second, we applied four season condition which consist of humidity, temperature and air velocity to the experimental environment. Finally, pressure was applied to get flow rate during experiment. This paper objective is to propose vaporizer type and length data for best performance of vaporizer through experiment.

• Earthquakes and Structures
• /
• v.4 no.5
• /
• pp.451-470
• /
• 2013

It generally accepted that most building structures shall exhibit a nonlinear response when subjected to medium-high intensity earthquakes. It is currently known, however, that this phenomenon is not properly modelled in the majority of cases, especially at the design stage, where only simple linear methods have effectively been used. Recently, as a result of the exponential progress of computational tools, nonlinear modelling and analysis have gradually been brought to a more promising level. A wide range of modelling alternatives developed over the years is hence at the designer's disposal for the seismic design and assessment of engineering structures. The objective of the study presented herein is to test some of these models in an existing structure, and observe their performance in nonlinear static and dynamic analyses. This evaluation is done by the use of two of a known range of advanced computer programs: SAP2000 and SeismoStruct. The different models will focus on the element flexural mechanism with both lumped and distributed plasticity element models. In order to appraise the reliability and feasibility of each alternative, the programs capabilities and the amount of labour and time required for modelling and performing the analyses are also discussed. The results obtained show the difficulties that may be met, not only in performing nonlinear analyses, but also on their dependency on both the chosen nonlinear structural models and the adopted computer programs. It is then suggested that these procedures should only be used by experienced designers, provided that they are aware of these difficulties and with a critical stance towards the result of the analyses.

• Structural Engineering and Mechanics
• /
• v.60 no.4
• /
• pp.567-594
• /
• 2016

The main objective of the current research is estimating the flexural behavior of ferrocement Ribbed Plates reinforced with composite material. Experimental investigation was carried out on fifteen plates; their dimensions were kept constant at 1200 mm in length, 600 mm width and 100 mm thick but with different volume fraction of steel reinforcement and number of ribs. Test specimens were tested until failure under three line loadings with simply supported conditions over a span of 1100 mm. Cracking patterns, tensile and compressive strains, deformation characteristics, ductility ratio, and energy absorption properties were observed and measured at all stages of loadings. Experimental results were compared to analytical models using ANSYS 10 program. Parametric study is presented to look at the variables that can mainly affect the mechanical behaviors of the model such as the change of plate length. The results showed that the ultimate strength, ductility ratio and energy absorption properties of the proposed ribbed plates are affected by the volume fraction and the type of reinforcement, and also proved the effectiveness of expanded metal mesh and woven steel mesh in reinforcing the ribbed ferrocement plates. In addition, the developed ribbed ferrocement plates have high strength, ductility ratio and energy absorption properties and are lighter in weight compared to the conventional RC ribbed plates, which could be useful for developed and developing countries alike. The Finite Element (FE) simulations gave good results comparing with the experimental results.

• Membrane and Water Treatment
• /
• v.11 no.1
• /
• pp.59-68
• /
• 2020

The study objective was to evaluate the enhanced removal of high concentrations of phosphorus from synthetic wastewater (solely phosphorus-containing) and real wastewater (pig manure) by using carbon nanotube (CNT)-coated steel slag. Generally, phosphorus removal by steel slag is attributed to Ca²⁺ eluted from the slag. However, in this study, CNT was used to control the excess release of Ca²⁺ from steel slag and increase the phosphorus removal. The phosphorus removal rate by the uncoated steel slag was lower than that of the CNT-coated steel slag, even though the Ca²⁺ concentrations were higher in the solution containing the uncoated steel slag. Therefore, the phosphorus removal could be attributed to both precipitation with Ca²⁺ eluted from steel slag in aqueous solution and adsorption onto the surface of the CNT-coated steel slag. Furthermore, the protons released from the CNT surface by exchanging with divalent cations acted to reduce the pH increase of the solution, which is attributed to the OH^- eluted from the steel slag. The adsorption isotherm and kinetics of the CNT-coated steel slags followed the Freundlich isotherm and pseudo-second-order model, respectively. The maximum adsorption capacity of the uncoated and CNT-coated steel slags was 6.127 and 9.268 mg P g^-1 slag, respectively. In addition, phosphorus from pig manure was more effectively removed by the CNT-coated steel slag than by the uncoated slag. Over 24 hours, the PO₄-P removal in pig manure was 12.3% higher by the CNT-coated slag. This CNT-coated steel slag can be used to remove both phosphorus and metals and has potential applications in high phosphorus-containing wastewater like pig manure.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.5
• /
• pp.637-642
• /
• 2005

The objective of this study was to evaluate the effect of dietary undegradable protein (UP) level on body weight change, nutrient intake, milk production and postpartum reproductive performance of Awassi ewes. Twenty-seven multiparous Awassi ewes (initial body weight = 53.3${\pm}$1.6 kg) were randomly assigned to three dietary treatments (9 ewes/treatment) for 62 days using a completely randomized design. Experimental diets were isonitrogenous (15.5% CP), isocaloric, and were formulated to contain 17.9 (LUP), 27.1 (MUP), and 34.0% (HUP) of the dietary CP as UP. On day 10${\pm}$3 (day 0 = parturition) ewes were housed in individual pens for 5 weeks. Feed offered and refused was recorded daily. At the end of this period, animals were removed from their pens and combined into 3 separate groups (LUP, MUP and HUP). One fertile, harnessed ram was allowed with each group for 34 days. Rams were rotated every 2 days among the three groups. Each group was offered the corresponding experimental diet. Organic matter, CP, UP and metabolizable energy intakes were higher (p<0.05) for ewes fed the HUP diet compared with ewes fed the LUP and MUP diets. Ewes fed the HUP diet gained more (p<0.05) weight compared with ewes fed the MUP diet (7.3 vs. 2.1 kg), while ewes fed the LUP diet lost an average of 2.1 kg. Pregnancy rate of ewes fed the HUP diet was 100%, compared with 66 and 33% for ewes fed the MUP and LUP diets, respectively. Lambing rate was greater (p<0.05) for ewes fed HUP (8/9) diet compared with ewes fed the MUP (4/9) and LUP (3/9) diets. These results indicate that Awassi ewes receiving adequate dietary UP level consume more feed and are capable of returning to estrus shortly after parturition and are capable of producing two lamb crops per year.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.11
• /
• pp.1484-1490
• /
• 2004

Mitochondrial DNA haplotypes from the displacement-loop (D-loop) region (436 bp) were genotyped and sequenced in Japanese Black beef cattle raised in the same herd. Correlation coefficients between mitochondrial DNA haplotypes, maternal lineage, birth weight, preweaning average daily gain, weaning weight, post weaning average daily gain and yearling weight were computed. The objective was to study the relationship between maternal and postnatal growth traits and to investigate if postnatal growth of calves to yearling age could be accurately predicted from mitochondrial DNA haplotypes. Results of the phylogenetic analysis revealed 17 maternal lineages and four mitochondrial DNA haplotypes. There were strong, positive and highly significant (p<0.001) correlations among maternal traits ranging from 0.52 to 0.98. Similarly, among postnatal growth traits, most of the correlations were also strong, positive and highly significant (p<0.001); the highest correlation of 0.94 was between preweaning average daily gain and weaning weight. However, correlations between mitochondrial DNA haplotypes and postnatal growth traits were very low, mostly negative and non-significant (p>0.05) ranging from -0.05 to 0.1. Prediction of postnatal growth from mitochondrial DNA yielded very low $R^{2}$ values ranging from 0.002 to 0.019. It was concluded that mitochondrial DNA polymorphism has no significant association with postnatal growth from birth to yearling age, and by implication, nuclear rather than cytoplasmic DNA, accounts for most of the genetic variation observed in postnatal growth of Japanese Black cattle. Therefore, mitochondrial DNA genotyping at an early age has no bearing on the accurate prediction of the future growth performance of calves.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.3
• /
• pp.299-303
• /
• 2012

Inbreeding is the mating of relatives that produce progeny having more homozygous alleles than non-inbred animals. Inbreeding increases numbers of recessive alleles, which is often associated with decreased performance known as inbreeding depression. The magnitude of inbreeding depression depends on the level of inbreeding in the animal. Level of inbreeding is expressed by the inbreeding coefficient. One breeding goal in livestock is uniform productivity while maintaining acceptable inbreeding levels, especially keeping inbreeding less than 20%. However, in closed herds without the introduction of new genetic sources high levels of inbreeding over time are unavoidable. One method that increases selection response and minimizes inbreeding is selection of individuals by weighting estimated breeding values with average relationships among individuals. Optimum genetic contribution theory (OGC) uses relationships among individuals as weighting factors. The algorithm is as follows: i) Identify the individual having the best EBV; ii) Calculate average relationships ($\bar{r_j}$) between selected and candidates; iii) Select the individual having the best EBV adjusted for average relationships using the weighting factor k, $EBV^*=EBV_j(1-k\bar{{r}_j})$ Repeat process until the number of individuals selected equals number required. The objective of this study was to compare simulated results based on OGC selection under different conditions over 30 generations. Individuals (n = 110) were generated for the base population with pseudo random numbers of N~ (0, 3), ten were assumed male, and the remainder female. Each male was mated to ten females, and every female was assumed to have 5 progeny resulting in 500 individuals in the following generation. Results showed the OGC algorithm effectively controlled inbreeding and maintained consistent increases in selection response. Difference in breeding values between selection with OGC algorithm and by EBV only was 8%, however, rate of inbreeding was controlled by 47% after 20 generation. These results indicate that the OGC algorithm can be used effectively in long-term selection programs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.9
• /
• pp.1431-1441
• /
• 2018

Objective: This study was conducted to assess the effects of replacing rice straw with different proportions of cassava pulp on growth performance, feed intake, digestibility, rumen microbial population, energy partitioning and efficiency of metabolizable energy utilization in beef cattle. Methods: Eighteen yearling Thai native beef cattle (Bos indicus) with an average initial body weight (BW) of $98.3{\pm}12.8kg$ were allocated to one of three dietary treatments and fed ad libitum for 149 days in a randomized complete block design. Three dietary treatments using different proportions of cassava pulp (100, 300, and 500 g/kg dry matter basis) instead of rice straw as a base in a fermented total mixed ration were applied. Animals were placed in a metabolic pen equipped with a ventilated head box respiration system to determine total digestibility and energy balance. Results: The average daily weight gain, digestible intake and apparent digestibility of dry matter, organic matter and non-fiber carbohydrate, total protozoa, energy intake, energy retention and energy efficiency increased linearly (p<0.05) with an increasing proportion of cassava pulp in the diet, whereas the three main types of fibrolytic bacteria and energy excretion in the urine (p<0.05) decreased. The metabolizable energy requirement for the maintenance of yearling Thai native cattle, determined by a linear regression analysis, was $399kJ/kg\;BW^{0.75}$, with an efficiency of metabolizable energy utilization for growth of 0.86. Conclusion: Our results demonstrated that increasing the proportion of cassava pulp up to 500 g/kg of dry matter as a base in a fermented total mixed ration is an effective strategy for improving productivity in zebu cattle.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.9
• /
• pp.1507-1515
• /
• 2018

Objective: In the poultry industry, the most important economic traits are meat quality and carcass yield. Thus, many studies were conducted to investigate the regulatory pathways during muscle differentiation. To gain insight of muscle differentiation mechanism during growth period, we identified and validated calcium-related genes which were highly expressed during muscle differentiation through mRNA sequencing analysis. Methods: We conducted next-generation-sequencing (NGS) analysis of mRNA from undifferentiated QM7 cells and differentiated QM7 cells (day 1 to day 3 of differentiation periods). Subsequently, we obtained calcium related genes related to muscle differentiation process and examined the expression patterns by quantitative reverse-transcription polymerase chain reaction (qRT-PCR). Results: Through RNA sequencing analysis, we found that the transcription levels of six genes (troponin C1, slow skeletal and cardiac type [TNNC1], myosin light chain 1 [MYL1], MYL3, phospholamban [PLN], caveolin 3 [CAV3], and calsequestrin 2 [CASQ2]) particularly related to calcium regulation were gradually increased according to days of myotube differentiation. Subsequently, we validated the expression patterns of calcium-related genes in quail myoblasts. These results indicated that TNNC1, MYL1, MYL3, PLN, CAV3, CASQ2 responded to differentiation and growth performance in quail muscle. Conclusion: These results indicated that calcium regulation might play a critical role in muscle differentiation. Thus, these findings suggest that further studies would be warranted to investigate the role of calcium ion in muscle differentiation and could provide a useful biomarker for muscle differentiation and growth.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.15
• /
• pp.6257-6261
• /
• 2014

Background: HPV related cervical cancer as one of the most common women cancers in developing countries. Regarding accessibility of commercial vaccines, any long or short term modality for integrating preventive immunization against HPV in a national program needs comprehensive information about HPV prevalence and its genotypes. The important role of selecting most accurate diagnostic technologies for obtaining relevant data is underlined by different assays proposed in the literature. The main objective of the present study was to introduce an in-house HPV typing assay using multiplex real time PCR with reliable results and affordable cost for molecular epidemiology surveys and diagnosis. MATERIALS AND METHODS: 112 samples of formalin fixed paraffin embedded tissues and liquid based cytology specimens from patients with known different grades of cervical dysplasia and invasive cancer, were examined by this method and the result were verified by WHO HPV LabNet proficiency program in 2013. RESULTS: HPV was detected in 105 (93.7%) out of 112 samples. The dominant types were HPV 18 (61.6%) and HPV 16 (42.9%). Among the mixed genotypes, HPV 16 and 18 in combination were seen in 12.4% of specimens. CONCLUSIONS: According to acceptable performance, easy access to primers, probes and other consumables, affordable cost per test, this method can be used as a diagnostic assay in molecular laboratories and for further planning of cervical carcinoma prevention programs.