• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.9
• /
• pp.671-678
• /
• 2012

The objective of this study is to analyze theoretically the performance of an open air-cycle refrigeration system in which environmental concerns increase. The pressure ratio of the external compressor and efficiencies of the components that compose of the system are selected as important parameters. As the pressure ratio of the external compressor increases, the pressure ratio of the ACM compressor is determined high, the refrigerating temperature and capacity increase, the COP decreases, and the total entropy production rate increases. The effect of heat exchanger effectiveness and turbine efficiency on the performance are greater than that of the ACM compressor efficiency. Also the performance of the air-cycle refrigeration system with two heat exchangers has been enhanced like high COP and low total entropy production rate, compared to the system with one heat exchanger.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.7
• /
• pp.181-186
• /
• 1999

The objective of present work is to investigate the performance characteristics of three-lobe Roots type supercharger for the applications of low-compression and high-expansion ration gasoline engine. A performance test was conducted to obtain the drive power, volumetric efficiency, adiabatic efficiency and the influence of performance factors of supercharger . In order to analyze the supercharging characteristics, the experiments are made on operating parameters such as the supercharger speed, pressure ration and inlet temperature on the supercharging performance of the Roots type supercharger . Based on experimental results, the drive power and flow rate of supercharger increased with supercharger speed.

• Journal of Korea Multimedia Society
• /
• v.19 no.8
• /
• pp.1415-1423
• /
• 2016

Interference in device-to-device (D2D) communication underlaying cellular network needs to be elaborately investigated because of channel sharing. The objective is to improve the quality of D2D communications while maintaining high performance for cellular users. In this paper, we solve the above problem by jointly considering channel allocation and power control using coalition formation game. Our cooperative game theoric approach allows to enhance network-wide performance. We design a merge-and-split algorithm to deal with the complexity of the combinatorial structure in coalition formation problem. The analytical and numerical results show that our algorithm converges to a stable point which achieves high network performance.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2003.03a
• /
• pp.377-384
• /
• 2003

Recently, there are much concerns about new and innovative transverse materials which could be used instead of conventional transverse steel in reinforced concrete bridge piers. FRP materials could be substituted for conventional transverse steel because of their sufficient strength, light weight, easy fabrication, and useful applicability to any shapes of pier sections, such as rectangular or circular sections. The objective of this research is to evaluate the seismic performance of reinforced concrete bridge pier specimens with FRP transverse reinforcement by means of the Quasi-Static test. In the first task, test columns were made using FRP rope, but these specimens appeared to fail at low displacement ductility levels due to insufficient confinement of strand extension itself. Therefore, the second task was to evaluate the seismic performance of test specimens transversely confined with FRP band. Although FRP banded specimens showed lower seismic performance than the specimen with spiral reinforcing steel, it satisfied with the response modification factor, 3, required for the single column of Korea bridge roadway design code. It was concluded that FRP band could be efficiently substituted for conventional reinforcing steel.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2006.03a
• /
• pp.201-208
• /
• 2006

This study lotuses on the seismic behavior of 3-, 9-, and 20-story steel moment resisting frame (MRF) structures designed in accordance with the 2000 International Building Code using different Response Modification factors (R factors) 8, 9, 10, 11, and 12. For a detailed case study, 30 different structures were evaluated for twenty ground motions representing the hazard level which is equal to a 2% probability exceeding in 50 years (2% in 50 years). The results showed that the current R factors provide conservative designs for the 3- and 9-story buildings for the Collapse Prevention performance objective. However, the 20-story buildings designed without using the minimum requirement of spectral acceleration CS prescribed in the IBC 2000 did not satisfy the seismic performance for Collapse Prevention performance.

• Journal of Aerospace System Engineering
• /
• v.3 no.4
• /
• pp.19-27
• /
• 2009

ITB(Interstage Turbine Burner) is a kind of afterburner locating between HPT(High Pressure Turbine) and LPT(Low Pressure Turbine). The objective of this study is to use the engine's design parameters as input parameters to obtain engine's performance parameters, such as specific thrust and its thrust specific fuel consumption. This study analyzes the performance of Turbofan engines with ITB and compares the performance between Turbofan engines with ITB and Turbofan engines without ITB. Results of this study can verify the advantages of Turbofan engine with ITB in term of thrust, efficiency.

• Earthquakes and Structures
• /
• v.16 no.3
• /
• pp.329-348
• /
• 2019

The main objective of this experimental research was to investigate the Seismic performance of reinforced concrete frames infilled with perforated clay brick masonry wall of a type commonly used in Algeria. Four one story-one bay reinforced concrete infilled frames of half scale of an existing building were tested at the National Earthquake Engineering Research Center Laboratory, CGS, Algeria. The experiments were carried out under a combined constant vertical and reversed cyclic lateral loading simulating seismic action. This experimental program was performed in order to evaluate the effect and the contribution of the infill masonry wall on the lateral stiffness, strength, ductility and failure mode of the reinforced concrete frames. Numerical models were developed and calibrated using the experimental results to match the load-drift envelope curve of the considered specimens. These models were used as a bench mark to assess the effect of normalized axial load on the seismic performance of the RC frames with and without masonry panels. The main experimental and analytical results are presented in this paper.

• Korean Journal of Veterinary Research
• /
• v.62 no.2
• /
• pp.15.1-15.8
• /
• 2022

The objective of this study was to identify risk factors for repeat breeder dairy cows and their impact on reproductive performance. The characteristics of 1,504 cows, including their peripartum health, nutrition, production, and reproduction, were collected. Cows with metabolic disorder were significantly more likely (odds ratio [OR], 2.47; p < 0.001) and cows with clinical endometritis tended to be more likely (OR, 1.35; p < 0.1) to become repeat breeders than cows without metabolic disorder and clinical endometritis, respectively. Cows initially inseminated > 80 days after calving were less likely (OR, 0.78; p < 0.05) to become repeat breeders than cows initially inseminated ≤ 80 days after calving. As a result, repeat breeding in dairy cows resulted in a 90 day longer (p < 0.0001) mean interval from calving to pregnancy. In conclusion, postpartum metabolic disorder, clinical endometritis, and a short interval from calving to initial insemination were risk factors for repeat breeder dairy cows, resulting in a severely impaired reproductive performance.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.5
• /
• pp.355-372
• /
• 2017

Objective: The aim of this study is to investigate the performance and usability of ten-finger text entry on Tablet PCs. Background: Generally a soft keyboard is used on Tablet PCs. However, the soft keyboard's performance is usually worse than physical keyboard's performance. In this study, we proposed a modified keyboard for tablet PCs to improve the performance of ten-finger text entry and evaluated the performance and subjective ratings of the keyboard. Method: The modified soft keyboard that is suggested in this study was compared with current Google and Samsung soft keyboards on Tablet PCs. Results: The three keyboards were not significantly different in terms of typing speed, error rate, and mental workload and showed bad performance. Also, the subjective ratings were not shown positively. Conclusion: Based on our results, ten-finger text entry using soft keyboards on Tablet PCs seems to be very difficult. However, we need to research the possibility continuously since ten-finger text entry can improve typing speed. Application: Our study can be a starting point of research that explores ten-finger text entry on Tablet PCs. The new soft keyboard design can be one of the soft keyboard alternatives. However, the key factors to improve the performance and usability of the soft keyboard will not be 'key size' or 'convenience to typing special characters or numbers', but other factors (e.g., 'tactile feedback').

• Journal of the Korean Society of Systems Engineering
• /
• v.16 no.1
• /
• pp.43-50
• /
• 2020

Many companies around the world are applying CMMI to improve the organization's ability to perform projects, and many others are pushing to obtain CMMI certification as more and more of them are offered as preconditions for participation in projects or supply product. Organizations with high maturity such as CMMI Level 4~5, analyze the accumulated R&D data of the organization and establish the performance management model so that R&D performance is continuously managed. So this paper shows the R&D performance management model made by LIGNex1 which is certificated with CMMI Level 5 organization and the case applied to the project, including its effectiveness.