• The Journal of Korean Society for Radiation Therapy
• /
• v.9 no.1
• /
• pp.64-70
• /
• 1997

The goal of radiation treatment planning is to deliver the dose to the patient within $5\%$ of that prescribed. We have often encountered the situation that the area which have not only several irregular contours but also tissue heterogeneities should be treated. With conventional devices such as wedges, missing tissue compensator. there are some limitations to achieve the uniform dose distribution in treatment volume. The use of CT simulator, 3-D planning system, computer-controlled milling machine enables it to deliver the dose uniformally. This report includes the whole procedure which have patient data acquisition 3D planning, computer-controlled milling, performance verification of 3D compensator, and TLD evaluation. We applied it for the treatment of head and heck cancer only. In Spite of the irregular contour and different electron density of tessue, we have achieved the uniformity of the dose distribution within ${\pm}3\%$ relatively. Although there are some problems which are not only verification of performance but uncertainties of using the new treatment device, we believe that the improvement of dosimetry will eliminate the uncertainties of that application. so the other lesions besides head and neck can will be ale to use the 3D compensator to achieve the dose uniformity

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.11
• /
• pp.1000-1009
• /
• 2013

This study investigated changes in behavioral performance before and after watching a multi-view 3D content by using auditory stimuli based on the selective attention theory in order to quantitatively evaluate 3D visual fatigue. Twenty-one undergraduates were asked to report on their current visual and physical condition both in the pre- and post-experiment. A selective attention task was conducted before and after mobile 3D viewing to compare the changes in performance. After performing a Wilcoxon's matched-pairs signed-ranks test on the subjective ratings of 3D visual fatigue, participants were categorized into two groups, unfatigued and fatigued group with a definite criterion. For the unfatigued group, no significant fatigue effects were found in behavioral response times and accuracies to specific auditory targets. In sharply contrast to the unfatigued group, the fatigued group showed significantly delayed response times and less response accuracies. However, no significant changes in accuracies for a working memory task were observed in both groups.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.373-375
• /
• 2002

4D CT is a dynamic volume imaging system of moving organs with an image quality comparable to conventional CT, and is realized with continuous and high-speed cone-beam CT. In order to realize 4D CT, we have developed a novel 2D detector on the basis of the present CT technology, and mounted it on the gantry frame of the state-of-the-art CT-scanner. In the present report we describe the design of the first model of 4D CT-scanner as well as the early results of performance test. The x-ray detector for the 4D CT-scanner is a discrete pixel detector in which pixel data are measured by an independent detector element. The numbers of elements are 912 (channels) ${\times}$ 256 (segments) and the element size is approximately 1mm ${\times}$ 1mm. Data sampling rate is 900views(frames)/sec, and dynamic range of A/D converter is 16bits. The rotation speed of the gantry is l.0sec/rotation. Data transfer system between rotating and stationary parts in the gantry consists of laser diode and photodiode pairs, and achieves net transfer speed of 5Gbps. Volume data of 512${\times}$512${\times}$256 voxels are reconstructed with FDK algorithm by parallel use of 128 microprocessors. Normal volunteers and several phantoms were scanned with the scanner to demonstrate high image quality.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.176-183
• /
• 2009

Distributed generation(DG) of combined cooling, heat, and power(CCHP)has been gaining momentum in recent year as efficient, secure alternative for meeting increasing energy demands. This paper presents the energy performance of microturbine CCHP system equipped with an absorption chiller by modelling it in hospital building. The orders of study were as following. 1)The list and schedule of energy consumption equipment in hospital were examined such as heating and cooling machine, light etc. 2) Annual report of energy usage and monitoring data were examined as heating, cooling, DHW, lighting, etc. 3) The weather data in 2007 was used for simulation and was arranged by meteorological office data in Daejeon. 4) Reference simulation model was built by comparison of real energy consumption and simulation result by TRNSYS and ESP-r. The energy consumption pattern of building were analyzed by simulation model and energy reduction rate were calculated over the cogeneration. As a result of this study, power generation efficiency of turbine was about 30[%] after installing micro gas turbine and lighting energy as well as total electricity consumption can be reduced by 40[%]. If electricity energy and waste heat in turbine are used, 56[%] of heating energy and 67[%] of cooling energy can be reduced respectively, and total system efficiency can be increased up to 70[%].

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.1
• /
• pp.59-70
• /
• 2016

The purpose of this study is to review that the VE techniques can be used as a selection tool of borrow pit locations. The analysis of the soil investigation report is performed for the selection of proposed borrow pit site on a large-scale residential development area. Possible earthwork volume of mining is estimated and the weighting matrix evaluation is applied to the VE techniques. After determining the evaluation items for VE assessment, important degree was calculated. The Rating and evaluation of performance is carried out on a proposed borrow pit site. And, development priority has to be decided for a proposed borrow pit sites. As a result, the relative construction cost is closely related to the haulage distance. As the haulage distance increases, the relative construction cost will be increased. Therefore, it was confirmed quantitatively that haulage distance has a significant impact on the select of borrow pits. Also, it was found that the condition of borrow pits itself is important, but it cannot be ignored the impact of the life cycle cost for the selection of optimal borrow pit sites.

• Korean Journal of Medicinal Crop Science
• /
• v.15 no.5
• /
• pp.339-345
• /
• 2007

Field performance and morphological characterization was conducted on seven transgenic lines of Codonopsis lanceolata expressing ${\gamma}-TMT$ gene. The shoots were obtained from leaf explants after co-cultivation with Agrobacterium tume-faciens strain LBA 4404 harboring a binary vector pYBI 121 that carried genes encoding ${\gamma}-Tocopherol$ methyltransferase gene (${\gamma}-TMT$) and a neomycin phosphotransferase II gene (npt II) for kanamycin resistance. The transgenic plants were transferred to a green house for acclimation. Integration of T-DNA into the $T_0\;and\;T_1$ generation of transgenic Codonopsis lanceolata genome was confirmed by the polymerase chain reaction and southern blot analysis. The progenies of transgenic plants showed phenotypic differences within the different lines and with relative to control plants. When grown in field, the transgenic plants in general exhibited increased fertility, significant improvement in the shoot weight, root weight, shoot height and rachis length with relation to the control plants. However, all seven independently derived transgenic lines produced normal flower with respect to its shape, size, color and seeds number at its maturity. Indicating that the addition of a selectable marker gene in the plant genome does not effect on seed germination and agronomic performance of transgenic Codonopsis lanceolata. $T_1$ progenies of these plants were obtained and evaluated together with control plant in a field experiment. Overall, the agronomic performance of $T_1$ progenies of transgenic Codonopsis lanceolata showed superior to that of the seed derived non-transgenic plant. In this study, we report on the morphological variation and agronomic performance of transgenic Codonopsis lanceolata developed by Agrobacterium transformation.

• Journal of the Korea Concrete Institute
• /
• v.16 no.2 s.80
• /
• pp.139-146
• /
• 2004

Recently, interest on the performance of the construction temporary equipment have been greatly increased. Since the application of the 'Performance Test Code' for the equipment in 1992 according to the Industrial Safety and Health Act, a basic study of Steel Pipe Supports have been carried out for the last 2 years based on the Performance Test Results. The present code specification for the Steel Pipe Supports and research status are introduced. So far, total 849 specimen have been examined on their outer and inner pipe's length, thickness, their overlapping length, and their load carrying capacities. The test was conducted separately into two groups - used and new equipment, and it was found that the used ones revealed a decrease on their load carrying capacity, almost $10\%$ compared to the new ones. Considering this fact, it is strongly recommended to ensure the quality of the equipment before use at the jobsite. First of all, based on this basic investigation, the statistical values on the Steel Pipe Supports are suggested and further analysis on the effect of each component is in progress. It is, however, expected that this report can be used as a basic information on the Steel Pipe Supports.

• Journal of Distribution Science
• /
• v.15 no.1
• /
• pp.105-114
• /
• 2017

Purpose - Recently, domestic pharmaceutical market is growing steadily, but top-tier companies are concentrating on sales growth. In this market, SMEs, which account for more than 80% of the entire market, suffer from the problem of lower margins and increasing inventory costs. According to the government's policy changes related to pharmaceuticals, it is pointed out that the management of existing customers and the control of salespeople are important issues for pharmaceutical companies. This study investigates the effect of the control system on the salesperson in domestic pharmaceutical distribution channel on customer-oriented selling behaviors and sales performance. Research design, data, and methodology - To verify the proposed research model and test hypotheses, the authors selected 244 MR(medical representatives)'s responses which have currently relationship with doctors or pharmacists. This study carefully investigated the reliability, content validity, convergent validity, and discriminant validity of the proposed model. Results - The authors find out the following results: capacity control, activity control, and self control have positive effects on customer-oriented selling behaviors and customer-oriented selling behaviors have a positive effect on sales performance. In addition, we present alternative model to check the direct effect between the control systems and the sales performance, but control system factors except self control have no direct influence. Conclusions - First of all, competency control and activity control increases the customer-oriented selling behavior of the salesperson. This means that the salesperson's sales skill, negotiation skill, customer access skill, presentation ability, monitoring, direction and evaluation are important and it is also important to control activities to check the number of visits to customers, report preparation, and customer service etiquette. Second, the fact that self-control of salesperson affects the customer-oriented selling behavior suggests that self-control is not controlled by external factors but rather establishes short/long-term goals. Therefore, it is important for sales organization to create an environment in which members can induce persistent incentives for self-control. Finally, output control did not affect customer-oriented sales behavior, which is less likely to form confidence or motivation to MRs when output control is perceived as a means of monitoring, supervising, or controlling rather than providing information to salespeople.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.1
• /
• pp.62-72
• /
• 2019

Future prospects for the North Korean construction market created by reunification of the Korean Peninsula has consistently been recognized as highly promising. Although rehabilitation projects of the deteriorating construction facilities in North Korea are expected to serve as new source of growth engine to South Korea in future, the status quo of each infrastructure in the North are described verbosely with signs of subjective translation. There has been limited approach on depicting the condition and performance of the North Korean facilities based on quantitative and systematic approach. Thus, this study has been conducted under a twofold purpose. First, this study proposes a performance indicator for identifying the status quo of the major construction facilities in North Korea based on a quantitative approach. Second, this study applies the developed indicator to visualize the results on the conditions of each facility in the form of a report card. This expected to serve as a basis on determining the appropriate level of the construction infrastructure in North Korea and estimating the range of rehabilitation projects along with the investment cost.

• The KIPS Transactions:PartD
• /
• v.11D no.7 s.96
• /
• pp.1399-1408
• /
• 2004

Because there are so many spatio-temporal data in Moving Object Databases, a single disk system can not gain the fast response time and tota throughput. So it is needed to take a parallel processing system for the high effectiveness query process. In these existing parallel process-ing system. it does not consider characters of moving object data. Moving object data have to be thought about continuous report to the Moving Object Databases. So it is necessary think about the new Declustering System for the high performance system. In this paper, we propose the new Dechustering Policies of Moving objet data for high effectiveness query processing. At first, consider a spatial part of MBB(Minimum Bounding Box) then take a SD(SemiAllocation Disk) value. Second time, consider a SD value and time value which is node made at together as SDT-Proximity. And for more accuracy Declustering effect, consider a Load Balancing. Evaluation shows performance improvement of aver-age %15\%$ compare with Round-Robin method about $5\%\;and\;10\%$ query area. And performance improvement of average $6\%$ compare with Spatial Proximity method.