• International Journal of Air-Conditioning and Refrigeration
• /
• 제12권4호
• /
• pp.184-191
• /
• 2004

In order to improve the performance of a 2 room heat pump with a constant speed compressor, the optimum refrigeration circuit of the heat pump with different cooling and heating capacities is developed by applying capillary tubes. The refrigeration circuit is composed of four parts; a heating circuit, a cooling circuit, a by-pass circuit and a balance circuit. The performance of the 2 room heat pump are investigated from a rating experiment and a reliability experiment, using the calorimeter. Results of the rating experiment show that the capacity of heat pump is about $93\%$ of the design value. In particular, the capacity of the cooling single operation is about $13\%$ higher than the design value, and the capacity of the heating multi operation is about $5\%$ higher than the design value. From the reliability experi-ment, it is found that the lowest driving voltage of the compressor is about $75\%$ of the rating voltage. Also the compressor is reoperated normally under the flood back and the over load.

• 한국환경생태학회지
• /
• 제23권1호
• /
• pp.78-89
• /
• 2009

유니버설디자인은 '모두를 위한 디자인'이고 '적응 가능한 디자인'으로 생활권 숲길에서 도입 필요성이 높다. 본 연구는 유니버설디자인 7원칙을 기본으로 정비한 생활권 숲길인 경상북도 포항시 도음산과 강원도 춘천시 안마산을 대상으로 숲길 보행시설의 중요도-성취도 분석으로 이용객 평가를 실시하여 효율적인 유니버설디자인 적용 숲길 조성을 위한 기초자료 제공을 목적으로 하였다. 이용객 평가는 설문조사로 하였으며, 포항 도음산에서 134부, 춘천 안마산에서 113부 총 247부의 응답 자료를 분석에 이용하였다. 응답자 거주지는 포항 도음산, 춘천 안마산 모두 주변 거주자가주를 이루었다. 도음산의 방문목적은 자연관찰과 교육이라는 응답 비율이 가장 높았고, 안마산은 건강을 위한 숲길이용이 주를 이루어 생활권 숲길 이용 행태의 전형적인 유형이었다. 포항 도음산의 중요도-성취도 분석 결과 중요도 평균값은 3.87, 성취도 평균값은 4.04로 높았다. 이는 유니버설디자인 적용 숲길의 시설 정비에 대해 매우 긍정적인 평가를 하였기 때문에 나타난 결과로 생각된다. 유도 및 안전 핸드레일의 안전·편리성과 안내사인의 내용을 쉽게 이해할 수 있도록 고려할 필요가 있으며, 이용목적에 부합하도록 생태해설 사인 도입이 요구된다. 또 숲길 접근 편리를 위해 노면 단차를 없애는 관리가 필요하다. 춘천 안마산에서 중요도 평균값은 3.92, 성취도 평균값은 3.99이었으며, 노면포장재료와 경계안전시설의 안전성 개선이 필요한 것으로 판단된다.

• 한국물환경학회지
• /
• 제34권6호
• /
• pp.569-578
• /
• 2018

To minimize the negative alterations in hydrologic and water quality environment in urban areas due to urbanization, Low Impact Development (LID) techniques are actively applied. In Korea, LID facilities are classified as Non-point Pollution Reduction Facilities (NPRFs), and therefore they are evaluated using the performance evaluation method for NPRFs. However, while LID facilities are generally installed in small, distributed configuration and mainly work with the infiltration process, the existing NPRFs are installed on a large scale and mainly work with the reservoir process. Therefore, some limitations are expected in assessing both facilities using the same method as they differ in properties. To solve these problems, in this study, a new method for performance evaluation was proposed with focus on bio-retention LID facilities. EPA SWMM was used to reproduce the hydrologic and water quality phenomena in study area, and SWMM-LID module used to simulate TP interception performance by installing a bio-retention cell under various conditions through long-term simulations. Finally, an empirical formula for Load Capture Ratio (LCR) was derived based on storm water interception ratio in the same form as the existing method. Using the existing formula in estimating the LCR is likely to overestimate the performance of interception for non-point pollutants in the extremely low design capacity, and also underestimate it in the moderate and high design capacity.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 2007년도 제55회 학술발표회논문집
• /
• pp.306-314
• /
• 2007

본 연구에서는 도로의 평면선형 설계일관성을 평가하기 위한 지표 및 모형을 개발하였다. 도로선형 설계 일관성은 운전자의 기대와 도로 기하구조의 일치성에 달려 있기 때문에 일관성 평가지표는 운전자의 행태특성을 잘 반영할 수 있어야 한다. 따라서 본 연구에서는 이를 고려한 새로운 평가지표의 개발과 도로 선형조건에 따른 평가지표들이 어떻게 변하는지를 파악하여 안전성을 평가하는 방안을 강구하였다. 본 연구에서는 차량간격과 속도편차를 새로운 평가지표로 제안하였다. 제안된 평가지표는 신설도로뿐만 아니라 기존도로의 선형일관성 평가로 도로의 안전성을 향상시킬 것으로 판단된다.

• 한국추진공학회지
• /
• 제24권1호
• /
• pp.1-8
• /
• 2020

메탄/산소 이원추진제 소형로켓엔진의 성능평가를 위한 형상설계 및 시험평가시스템을 구축하였다. 인젝터는 추진제 미립화 성능이 우수하고, 연소불안정성이 적은 스월 동축형(swirl-coaxial) 방식을 채택하였다. 연소효율 비교를 위해 연소실의 종횡비는 1.5, 1.8, 2.1로 각각 설정하였다. 그리고 정밀추력측정장치의 측정 신뢰성을 높이기 위해 pre/post calibration을 실시하였다. 그 결과, 예비 지상연소시험에서 추력과 비추력은 89.2 N, 181.8 s로 78.4%의 효율을 가지고, 특성속도는 84.2%의 효율을 갖는 것이 확인되었다.

• 대한산업공학회지
• /
• 제34권2호
• /
• pp.190-204
• /
• 2008

Recently, it has been strongly required to establish a systematic and sustainable performance investigation and evaluation framework on governmental funding projects for IT small and medium-sized enterprises. In this paper, Data Envelopment Analysis (DEA) models are adopted for performance evaluation on governmental funding projects for IT small and medium-sized enterprises. A new data structure is proposed for the DEA performance evaluation. Generally, in using DEA models, DEA multipliers restriction is critical to achieve the reliability of DEA optimal solutions. Based on the outputs and inputs considered in this study, Acceptance Region (AR) constraints are generated and incorporated into the DEA models so as to improve the reliability of DEA efficiency scores. Associated with AR Type I (AR-I), AR Global Model (ARGM) constraints, DEA/ (AR-I, ARGM) models are designed and then sensitivity analysis follows investigating the robustness of DEA efficiency scores relating to AR constraints adjustment. Finally, a performance evaluation is illustrated regarding governmental direct funding projects from Ministry of Information and Communication (MIC) in Korea where each project unit (i.e. Decision Making Unit (DMU)) is determined whether it is efficient or not. By using DEA/(AR-I, ARGM) models designed in this paper, robustly efficient DMUs are gradually identified according to the successive AR constraints adjustment. Among 25 DMUs, results show that 6 DMUs such as B, E, G, Q, S, Y are determined as robustly efficient against AR constraints intermediate adjustment.

• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.130-136
• /
• 2005

This paper presents an optimal design and the performance evaluation of two-axis nano positioning stage with round notched flexure hinges. A flexure hinge mechanism with round notched flexure hinges is to guide the linear motions of a moving plate in the nano positioning stage. A Min-Max algorithm is applied to the design of the flexure hinge mechanism for nano positioning stage. In the design process, the structure of the flexure hinge mechanism is fixed, then the radius of a round hole and the width of two round holes are chosen as design variables, and finally the do sign variables are calculated by the Min-Max algorithm. The machined flexure hinge mechanism, stack type PZTs for actuation and capacitance type displacement sensors for position measurement are assembled into the nano positioning stage. The experimental results of the manufactured nano positioning stage show the first modal resonance frequency of 197 Hz, the operating range of 40 um, and the resolution of 3 nm.

• 상하수도학회지
• /
• 제29권1호
• /
• pp.65-75
• /
• 2015

In this study, cation and anion exchange process for performance evaluation was conducted. A pilot plant for the ultrpure water production was installed with the capacity of $25m^3/d$. The various production rate and regeneration of ion exchange rate were tested to investigate the design parameters. The test resulst was applied to calculate the operating costs. Changing the flow rate of the ion exchange capacity of the reproduction reviewed the cation exchange process as opposed to the design value is 120 to 164% efficiency, whereas both anion exchange process is 82 to 124% efficiency, respectively. This results can be applied for more large scale plant if the scale up parameters are consdiered. The ion exchange capacity of the application in accordance with the design value characteristic upon application equipment is expected to be needed. In this study, the performance of cation and anion exchange resin process was evaluated with pilot plant($25m^3/d$). The ion exchange capacity along with space velocity and regeneration volume was evaluated. In results, the operation results was compared with design parameters.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.615-616
• /
• 2008

Generally, distance between sensor nodes is measured using received signal strength indicator (RSSI) in wireless sensor network (WSN). Since RSSI is not absolutely accurate and stable in indoor environment, the performance of position estimation largely depends on estimation methods. In this paper, performance evaluation is presented to compare trilateration based positioning technique and collaborative ranging (CR) technique. From evaluation results, CR method is shown to be better than trilateration based method in terms of accuracy and precision.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.205-210
• /
• 2007

The existing capacity spectrum method (CSM) is based on the displacement based approach for seismic performance and evaluation. Currently, in the domestic and overseas standard concerning seismic design, the CSM to obtain capacity spectrum from capacity curve and demand spectrum from elastic response spectrum is presented. In the multistory building, collapse is affected more by drift than by displacement, but the existing CSM does not work for story drift. Therefore, this paper proposes an improved CSM to estimate story drift of structures through seismic performance and evaluation. It uses the ductility factor in the A-T domain to obtain constant-ductility response spectrum from earthquake response of inelastic system using the drift and capacity curve from capacity analysis of structure.