• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.425-430
• /
• 2019

This work describes the design and characterization of a X-band power amplifier (PA) monolithic microwave integrated circuit (MMIC) using a $0.25{\mu}m$ gate length gallium nitride (GaN) high electron mobility transistor (HEMT) technology. The developed X-band power amplifier MMIC has small signal gain of over 22.7 dB and saturated output power of 43.02 dBm (20.04 W) over the entire band of 9 to 10 GHz. Maximum saturated output power is a 43.84 dBm (24.21 W) at 9.5 GHz. Its power added efficiency (PAE) is 41.0~51.24% and the chip dimensions are $3.7mm{\times}2.3mm$, generating the output power density of $2.84W/mm^2$. The developed GaN power amplifier MMIC is expected to be applied in a variety of X-band radar applications.

• Korean Journal of Materials Research
• /
• v.29 no.1
• /
• pp.37-42
• /
• 2019

This study investigates Ag coated $Cu_2O$ nanoparticles that are produced with a changing molar ratio of Ag and $Cu_2O$. The results of XRD analysis reveal that each nanoparticle has a diffraction pattern peculiar to Ag and $Cu_2O$ determination, and SEM image analysis confirms that Ag is partially coated on the surface of $Cu_2O$ nanoparticles. The conductive paste with Ag coated $Cu_2O$ nanoparticles approaches the specific resistance of $6.4{\Omega}{\cdot}cm$ for silver paste(SP) as $(Ag)/(Cu_2O)$ the molar ratio increases. The paste(containing 70 % content and average a 100 nm particle size for the silver nanoparticles) for commercial use for mounting with a fine line width of $100{\mu}m$ or less has a surface resistance of 5 to $20{\mu}{\Omega}{\cdot}cm$, while in this research an Ag coated $Cu_2O$ paste has a larger surface resistance, which is disadvantageous. Its performance deteriorates as a material required for application of a fine line width electrode for a touch panel. A touch panel module that utilizes a nano imprinting technique of $10{\mu}m$ or less is expected to be used as an electrode material for electric and electronic parts where large precision(mounting with fine line width) is not required.

• Journal of Sensor Science and Technology
• /
• v.28 no.3
• /
• pp.198-204
• /
• 2019

In this study, we propose a wearable force sensor using 3D printed mold and liquid metal. Liquid metal, such as Galinstan, is one of the promising functional materials in stretchable electronics known for its intrinsic mechanical and electronic properties. The proposed soft force sensor measures the external force by the resistance change caused by the cross-sectional area change. Fused deposition modeling-based 3D printing is a simple and cost-effective fabrication of resilient elastomers using liquid metal. Using a 3D printed microchannel mold, 3D multichannel Galinstan microchannels were fabricated with a serpentine structure for signal stability because it is important to maintain the sensitivity of the sensor even in various mechanical deformations. We performed various electro-mechanical tests for performance characterization and verified the signal stability while stretching and bending. The proposed sensor exhibited good signal stability under 100% longitudinal strain, and the resistance change ranged within 5% of the initial value. We attached the proposed sensor on the finger joint and evaluated the signal change during various finger movements and the application of external forces.

• Horticulture, Environment, and Biotechnology : HEB
• /
• v.59 no.6
• /
• pp.909-917
• /
• 2018

Quercetin and its glycoside derivatives were identified and quantified using high-performance liquid chromatograph (HPLC) and liquid chromatograph/mass spectrometer/mass spectrometer (LC/MS/MS) in the leaves, flowers, and fruits of 22 Malus genotypes. In all genotypes, small amounts of quercetin aglycone were present, with water-soluble glycoside forms were the most abundant in different Malus plant tissues, including quercetin-3-galactoside, quercetin-3-rutinoside, quercetin-3-glucoside, quercetin-3-xyloside, quercetin-3-arabinoside, and quercetin-3-rhamnoside. Among these six quercetin glycosides, quercetin-3-galactoside was the common form in Malus plants, except in the leaves and flowers of M. ceracifolia and M. magdeburgensis, and in the fruits of M. micromalus 'Haihong Fruit', where there was a higher concentration of quercetin3-glucoside. Among the different tissues tested, leaves contained the highest concentration of quercetin and its glycosides, while fruits contained the lowest concentrations of these compounds. Among the genotypes we analyzed, no specific genotype consistently contained the highest concentration of quercetin and its glycoside derivatives. M. domestica 'Honeycrisp' had the highest total compound concentration (approximately $1600mg\;kg^{-1}$), whereas M. hupehensis contained the lowest in its fruits. In contrast, the concentration of total quercetin and its glycosides was more than $5000mg\;kg^{-1}$ in the leaves of eight genotypes and greater than $2500mg\;kg^{-1}$ in the flowers of seven species. In general, the concentration of quercetin and its glycoside derivatives depended on the species and tissue type. These results may provide useful information for the evaluation and selection of edible Malus fruits and the materials for quercetin glycoside extraction.

• Food Engineering Progress
• /
• v.21 no.3
• /
• pp.233-241
• /
• 2017

Scaffolds of cell substrates are biophysical platforms for cell attachment, proliferation, and differentiation. They ultimately play a leading-edge role in the regeneration of tissues. Recent studies have shown the potential of bioactive scaffolds (i.e., osteo-inductive) through 3D printing. In this study, rice bran-derived biocomposite was fabricated for fused deposition modeling (FDM)-based 3D printing as a potential bone-graft analogue. Rice bran by-product was blended with poly caprolactone (PCL), a synthetic commercial biodegradable polymer. An extruder with extrusion process molding was adopted to manufacture the newly blended "green material." Processing conditions affected the performance of these blends. Bio-filament composite was characterized using field emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray spectroscopy (EDX). Mechanical characterization of bio-filament composite was carried out to determine stress-strain and compressive strength. Biological behaviors of bio-filament composites were also investigated by assessing cell cytotoxicity and water contact angle. EDX results of bio-filament composites indicated the presence of organic compounds. These bio-filament composites were found to have higher tensile strength than conventional PCL filament. They exhibited positive response in cytotoxicity. Biological analysis revealed better compatibility of r-PCL with rice bran. Such rice bran blended bio-filament composite was found to have higher elongation and strength compared to control PCL.

• Journal of Hydrogen and New Energy
• /
• v.32 no.1
• /
• pp.41-52
• /
• 2021

NiO and Co3O4-doped porous La(CoNi)O3 perovskite oxides were prepared from excess Ni addition by a hydrothermal method using porous silica template, and characterized as bifunctional catalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) for Zn-air rechargeable batteries in alkaline solution. Excess Ni induced to form NiO and Co3O4 in La(CoNi)O3 particles. The NiO and Co3O4-doped porous La(CoNi)O3 showed high specific surface area, up to nine times of conventionally synthesized perovskite oxide, and abundant pore volume with similar structure. Extra added Ni was partially substituted for Co as B site of ABO3 perovskite structure and formed to NiO and Co3O4 which was highly dispersed in particles. Excess Ni in La(CoNi)O3 catalysts increased OER performance (259 mA/㎠ at 2.4 V) in alkaline solution, although the activities (211 mA/㎠ at 0.5 V) for ORR were not changed with the content of excess Ni. La(CoNi)O3 with excess Ni showed very stable cyclability and low capacity fading rate (0.38 & 0.07 ㎶/hour for ORR & OER) until 300 hours (~70 cycles) but more excess content of Ni in La(CoNi)O3 gave negative effect to cyclability.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.41 no.2
• /
• pp.36-44
• /
• 2020

Mulberry root bark is one of potential plant sources for antioxidant materials which can be used for the relief of oxidative stress. To explore the effects of solvent type and temperature on the structural characteristics and antioxidant activity of the root bark extracts, we prepared various extracts of mulberry root bark (Morus alba L.) using 0 - 100 % ethanol (EtOH) at RT - 100℃. EtOH concentration and temperature critically affected the extraction yields, the content of bioactive components, and antioxidant activity of the extracts. Use of high content of EtOH solvent and low temperature resulted in the low extraction yield. Meanwhile, it was revealed that the extract prepared using absolute EtOH at room temperature contained polyphenols and flavonoids with the highest contents among other extracts. Interestingly, the temperature differently affected the polyphenol and flavonoid contents according to the solvent types. In the case of 30% EtOH solvent, polyphenol and flavonoid contents increased with an increase in temperature, whereas in the case of 70 and 100 % EtOH, these contents decreased. Using the radical scavenging assay, it was confirmed that the 100% EtOH extracts had higher antioxidant activity compared to distilled water (DW) extracts regardless of temperature. Also, heating might extract more antioxidant components from the root bark. Especially, the extract prepared using 30% EtOH solvent at 100℃ showed the highest antioxidant activity. Taken together, these experimental results imply that the extraction parameters should be designed carefully considering the productivity, the extracted bioactive components, and antioxidant activity.

• Textile Coloration and Finishing
• /
• v.34 no.2
• /
• pp.117-126
• /
• 2022

In this study, thermoplastic composites were manufactured using ABS(acrylonitrile butadiene styrene), PC(polycarbonate), and POE(polyolefin elastomer), which are thermoplastic plastics. Twin screw extruder and injection molding were used to manufacture thermoplastic composites. When the ABS/PC/POE thermoplastic composite material was manufactured, the POE mass fraction was set to 1 to 5 wt.%, and the thermal and mechanical properties according to the POE mass fraction were analyzed. Based on the physical properties of ABS/PC/POE, a 3D model in the form of an e-bike frame was created. After setting the boundary conditions, when an external load is applied, geometry simulation was performed to predict product performance. The ABS/PC/POE thermoplastic composite material exhibited the best physical properties when the mass fraction of POE was 3 wt.%. In the simulation results for the physical properties of the 3D model in the form of an e-bike frame, the best physical properties were shown when the mass fraction of POE was 2 ~ 3 wt.%. As a result, the manufacturing conditions for ABS/PC/POE thermoplastic composite materials were set, and research was conducted to reduce product development costs and development time.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.3
• /
• pp.149-158
• /
• 2022

To realize the infinite possibilities of materials derived from wood, it is necessary to overcome the weak moisture stability of wood. Thus, the development of an eco-friendly hydrophobic coating agent is essential, and of these, woody biomass-based materials are strongly attractive as coatings. In this study, eco-friendly hydrophobic wood coatings were prepared using carnauba wax purified from palm leaves and sprouts, and kraft lignin. The physicochemical properties of the carnauba wax/lignin blends according to the ratio of carnauba wax and lignin were observed by morphology and functional group change. In addition, the coating performance of carnauba wax/lignin blend coatings was confirmed by measuring the contact angle change. It was found that the addition of lignin could accelerate the atomization of wax particles, and that micro-roughness can be realized when applied to the actual wood surface, to ensure that the coating effect over time lasts longer. In addition, it was confirmed that the addition of lignin increases the hydrogen-bond-based interaction with the wood of the coating, thereby providing better coating stability and increasing the durability of the coating solvent under friction. The carnauba wax/lignin paint developed in this way is eco-friendly because all components are made of wood-based raw materials and have an excellent affinity with wood surfaces. Therefore, it is expected to be applicable to the coating process of wood-plastic composites and timber composites.

• Korean Journal of Materials Research
• /
• v.32 no.9
• /
• pp.369-378
• /
• 2022

The recycling of solid waste materials to fabricate carbon-based electrode materials is of great interest for low-cost green supercapacitors. In this study, porous carbon foam (PCF) was prepared from waste floral foam (WFF) as an electrode material for supercapacitors. WFF was directly carbonized at various temperatures of 600, 800, and 1,000 ℃ under an inert atmosphere. The WFF-derived PCF (C-WFF) was found to have a specific surface area of 458.99 m²/g with multi-modal pore structures. The supercapacitive behavior of the prepared C-WFF was evaluated using a three-electrode system in a 6 M KOH aqueous electrolyte. As a result, the prepared C-WFF as an active material showed a high specific capacitance of 206 F/g at 1 A/g, a rate capability of 36.4 % at 20 A/g, a specific power density of 2,500 W/kg at an energy density of 2.68 Wh/kg, and a cycle stability of 99.96 % at 20 A/g after 10,000 cycles. These results indicate that the C-WFF prepared from WFF could be a promising candidate as an electrode material for high-performance green supercapacitors.