• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.201-201
• /
• 2012

Using materials with high thermal conductivity is a matter of great concern in the field of thermal management. In this study, we present our experimental results on an important physical property of carbon nanotube (CNT) films, two-dimensional thermal conductivity obtained by using an optical method based on Raman spectroscopy. We prepared four kinds of CNT films to investigate the effect of CNT type on heat spreading performance of films. This first comparative study using the optical method shows that the arc-discharge single-walled carbon nanotubes yield the best heat spreading film. And we observed thermal conductivity values of CNT films with various transmittances and found that the Raman method works as long as the sample is a transparent film. This study provides useful information on characterization of thermal conduction in transparent CNT films and could be an important step toward high-performance carbon-based heat spreading films.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05b
• /
• pp.53-56
• /
• 2004

Morphology of membrane affects its performance [1]. For a constant amount of fixed charges, the distribution of these charges is also significant to its performance (2). In some ionomer membranes such as Nafion, the membrane fixed charge is not randomly distributed, but occurs in clusters. Thus, the membrane solution is phase-separated, with the ion clusters, acting as inverted micelles in a polymer solvent.(omitted)

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.06a
• /
• pp.21-35
• /
• 1997

As environmental regulations become more stringent, water, used either as drinking water or as industrial process water, becomes increasingly better in its quality. As a result, an increasingly more advanced water treatment technology is required. It is believed that membrane technology will be able to satisfy such a requirement. The heart of the membrane technology is membrane. The advancement in water treatment technology using membranes, therefore, depends on the development of novel membranes which are superior in performance to the currently available membranes. In this paper, a brief review will be made how the recent progress in surface science, such as surface modification and surface characterization, has aided to improve the performance of the membranes used for water treatment. Some suggestions will also be made regarding the future direction of the research in this area.

• Korean Membrane Journal
• /
• v.4 no.1
• /
• pp.12-19
• /
• 2002

Nanofiltration of aqueous dye solutions was carried out using polyamide (PA) nanofiltration (NF) composite membranes. The PA composite membranes were prepared by the interfacial polymerization of piperazine (PIP) and trimesoyl chloride (TMC) on the surface of microporous polysulfone (PSf) ultrafi1tration (UF) membranes. After characterization in terms of their permeation performance and surface ionic property, they were used for the separation of dye solutions such as Direct Red 75, 80, 81, and Direct Yellow 8 and 27. The separation conditions were varied to study the factors affecting on the permeation performance of the membranes: different concentrations of dye solutions, operating temperature and time, and flow rate of a feed solution. The surface property of the membrane, especially its ionic property, as a function of operating time was examined with a zeta-potentiometer and the relationship between the surface chemistry of the membrane and its permeation properties was also studied.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.77-82
• /
• 2011

A new high performance liquid chromatograpgy (HPLC) stationary phase that possesses an internal carbonyl functional group is synthesized by heterogeneous "graft from" method. This new stationary phase, poly (vinyl octadecanoate) grafted silica (Sil-2) is then characterized by different physico-chemical methods such as diffuse reflectance infrared fourier transform, suspension state $^1H$ NMR, solid state $^{13}C$ CP/MAS NMR, $^{29}Si$ CP/MAS NMR, elemental analysis and thermogravimetric analysis. Chromatographic properties of Sil-2 were evaluated under reversed phase condition by separating polycyclic aromatic hydrocarbons (PAHs) and comparing the chromatographic results with those on polymeric as well as monomeric octadecylated silica stationary phases.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.10
• /
• pp.761-770
• /
• 1991

This paper suggests a measure constraint locus for characterization of the performance of a subtask for a redundant robot. The measure constraint locus are the loci of points satisfying the necessary constraint for optimality of measure in the joint configuration space. To uniquely obtain an inverse kinematic solution, one must consider both measure constraint locus and self-motion manifolds which are set of homogeneous solutions. Using measure constraint locus for maniqulability measure, the invertible workspace without singularities and the topological property of the configuration space for linding equilibrium configurations are analyzed. We discuss some limitations based on the topological arguments of measure constraint locus, of the inverse kinematic algorithm for a cyclic task. And the inverse kinematic algorithm using global maxima on self-motion manifolds is proposed and its property is studied.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.4
• /
• pp.1-6
• /
• 1989

This paper addresses modeling of the gyro drift by using the structure function approach which has been originally developed for characterization of the oscillator phase noise. It is shown that by using this approach, an arbitrary order of random and deterministic gyro drift processes can be characterized and easily measured. The relationship between the drift power spectral density and structure function is clarified. It is also shown that this approach simplifies analysis of the effect of drift on the control system performance.

• Advances in Energy Research
• /
• v.3 no.3
• /
• pp.181-194
• /
• 2015

In this work, an experimental study of the gasification on wood was carried out in downdraft type fixed bed Gasifier attached with 10 kW duel fuel diesel engine. The main objective of the study was to use wood as the biomass fuel for downdraft Gasifier and to evaluate the operating parameter of gasifier unit to predict its performance in terms of gas yield and cold gas efficiency. The influence of different biomass on fuel consumption rate, gas yield and cold gas efficiency was studied. Composition of producer gas was also detected for measuring the lower heating value of producer gas to select the feed stock so that optimum performance in the existing gasifier unit can be achieved. Under the experimental conditions, Lower heating value, of producer gas, cold gas efficiency and gas yields, using wood as a feed stock, are $4.85MJ/m^3$, 46.57% and $0.519m^3/kg$.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.07a
• /
• pp.103-105
• /
• 2003

A chiral stationary phase (CSP) was synthesized by the modification of the chitosan using N-nicotinoyl phenylalanine and 3, 5-dimethylphenylisocyanate . The CSP based on the chitosan was then characterized in terms of their chemical structure and physical properties. To test its performance as a CSP, the silica powder with 5 ${\mu}{\textrm}{m}$ of diameter were coated with the CSP to pack a column for High Performance Liquid Chromatograph (HPLC). Using the packed column, several racemates were tried to separate under various separation conditions with different compositions of eluents.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.12
• /
• pp.1084-1090
• /
• 1998

As device sizes are scaled down to submicron dimensions, planarization technology becomes increasingly important for both device fabrication and formation of multilevel interconnects. Chemical mechanical polishing (CMP) has emerged recently as a new processing technique for achieving a high degree of planarization for submicron VLSI applications. The polishing process has many variables, and most of which are not well understood. The factors determine the planarization performance are slurry and pad type, insert material, conditioning technique, and choice of polishing tool. Circuit density, pattern size, and wiring layout also affect the performance of a CMP planarization process. This paper presents the results of studies on CMP process window characterization for 0.35 micron process with 5 metal layers.