• Radiation Oncology Journal
• /
• 제8권2호
• /
• pp.241-253
• /
• 1990

1980.6.부터 1985.12.까지 고신의료원 치료방사선과에서 방사선 단독 치료한 병기 IIb 자궁경부암 환자 331명에 대하여 후향적으로 생존율 치료 실패 및 합병증 등에 영향을 미칠 수 있는 방사선 치료요소들을 분석조사 하였다. 5년 생존율과 무병생존율은 각각 $82.8{\%}$와 $82.4{\%}$였다. 방사선 치료 6주 경과에 분석한 골반내 관해율은 전골반 외부 조사후 강내조사한 예에서는 $98.6{\%}$였고 축소조사한 추가 치료한 예에서는 $71.6{\%}$였다. 전골반 방사선 조사후 완전관해를 보였던 예에서의 5년 생존율은 $98.9{\%}$였지만 국소치료실패 및 원격전이한 예에서는 $12.9{\%}$였다. Point A에 $7500{\~}8500$ cGy를 조사한 예에서는 $88.5{\%}$의 5년 생존율을 보였고 합병증은 $4.9{\%}$였지만 그 이상의 조사량에서는 생존율은 증가한지 않았고 합병증만 증가하였다. $18.7{\%}$(62예)에서 치료실패를 보였는데, 이중국소치료실패가 $72.6{\%}$(45예), 국소 및 골반임파 치료실패가 $3.2{\%}$(2예)였으며 원격전이 실패는 $24{\%}$(15)였다. 합병증은 $15.1{\%}$(50예)였는데 이중 $42{\%}$가 직장 출혈 및 협착이였다. Point A의 조사량은 8500 cGy가 합병증 유발의한계 조사량 이였으며 합병증의 $70{\%}$가 그 이상의 조사양에서 발생하였다. 직장 합병증은 6500 cGy이상에서 발생하였고 방광합병증은 7500 cGy이상에서 발생하였다. 사망의 원인으로는 국소치료실패로 인한 전신쇠약이 대다수였으며 전체 사망원인으로는 국소치료 실패로 인한 전신쇠약이 대다수였으며 전체 사망원인의 $73.7{\%}$였고 그외 폐, 간, 뼈 전이순이였으며 방사선합병증으로 인한 사망은 3예에 지나지 않았다. 상기와 같은 결과에 대한 결론으로 크기가 아주 큰 종양이나 Barrel형태의 종양의 방사선 치료에는 지금 많이 사용되고 있는 4000 cGy이상의 외부 조사량이 강내조사전에 골반관해를 성취하기 위해 필요한 것을 알 수 있었다.

• 대한기관식도과학회:학술대회논문집
• /
• 대한기관식도과학회 1982년도 제16차 학술대회연제순서 및 초록
• /
• pp.14.2-15
• /
• 1982

삼출성 중이염은 이 질환중 가장 많은 도를 차지하는 질환의 하나로서 1869 년 Politzer가 최초로 기술하고 치료법을 소개한 이후로 현재까지 그 병인 및 다양한 치료법이 연구 개발되어 왔으며 이중 중이내 통기관 유치술은 1954년 Armstrong에 의해 성공적으로 시행된 이후 여러 학자들에 의해 변형 발전되어 최근에 이르러서는 삼출성 중이염의 치료에 있어서 가장 보편적인 방법으로 사용되고 있으나 또한 그에 따른 합병증 때문에 논란의 대상이 되고 있다. 연자 등은 삼출성중이염의 임상적 측면을 재검토하고 중이내 통기관유치술의 치료효과 및 합병증을 조사하여 그 유용성을 확인 하고자 1981. 1. 1부터 1982. 2. 28 까지 1년 2 개월 동안 본원 이비인후과에서 중이내 통기관유치술을 시행한 환자 97명 (157이)을 대상으로 하여 삼출성중이염의 증상, 연령분포, 동반질환, 고막의 이학적 소견, 청력손실의 정도와 술후의 청력증진, 합병증 등을 분석하여 다음과 같은 결과를 얻었다. 사용한 통기관으로는 Sheehy의 collar button tube와, Per Lee tube였다. 1) 증상의 빈도는 29례중 청력소실 29례(100%) 이명 19례 (65.6%) 자성강청(Autophony), 12례 (44.4%) 이충만감 10례 (34.5%)의 순이었다. 2) 연령분포는 6∼10세가 42례 (43.3%)로 제일 많은 비율을 차지하였고 20세 이상의 성인도 23례(23.5%)나 있었다. 3) 소아에서는 주로 양측성으로, 성인에서는 일측성으로 발생하는 경향을 보여주었다. 4) 동반질환으로는 편도 및 아데노이드비후가 49례 (50.5%). 부비동염 15례 (15.5%), 비알레르기 4례 (4.1%)등의 순이었다. 5) 술전 고막소견은 함몰 62귀 (42.7%), 팽윤 37귀 (23.6%), 변색(21.7%)등의 순이었으며 특별한 병적 소견이 없는 경우고 29귀 (18.5%)나되었다. 6) 삼출액의 특성은 15세이하의 소아에서는 점액성이 84.2%로 많았고 성인에서는 장액성이 62.5%로 많았다. 7) 술전 기골도차는 21∼30dB가 48귀 (30.6%)로 제일 많은 비율을 차지하고 있었으며 평균 25.3dB이었다. 8) 술후 청력증지은 10dB 이상 증가한 경우가 24귀 (72.7%)로서 평균 17.2dB였다. 9) 합병증으로는 감염이 37귀 (23.6%) 무기화 3귀(1.9%)과립조직의 증식 2귀 (1.3%) 영구천공 2귀 (1.3%)의 순이었다. 10) 술후 감염증이 있었던 37 귀중 수술직후부터 계속되었던 경우가 19 귀(51.4%), 도중에 발생한 경우가 18 귀(48.6%)였으며 이들중 26귀(70.3%)에서는 대증요법으로서 치유되었으며 11귀 (29.7%)에서는 통기관을 제거한 후에야 감염증이 치유되었다.

• 대한영상의학회지
• /
• 제82권2호
• /
• pp.371-381
• /
• 2021

목적 수술 후 발생하는 기관지늑막루에 대한 bronchial occluder device (이하 BOD)의 유용성 및 효과성을 평가하고자 한다. 대상과 방법 2009년도부터 2019년까지 폐암 및 폐결핵으로 수술 후 발생한 7명의 기관지늑막루 환자들 중에 BOD 치료를 실시한 6명의 환자를 대상으로 하였다. 폐암 환자가 5명, 폐결핵 환자는 1명이었다. 남자가 5명, 여자가 1명이었으며 59세에서 74세(평균: 69세)이었다. 진단은 전산화단층기관지 촬영과 기관지내시경으로 실시하였다. 시술은 진단 후 1주에서 2주 사이에 실시하였다. 치료에 사용된 BOD의 기술적 성공 및 임상적 성공을 평가하였다. 시술 후 임상적 치료 효과와 생존 기간 및 부가적인 치료에 대하여 알아보았다. 결과 총 6명 환자 모두에서 시술을 성공적으로 실시하였다. 임상성공 5명에서 있었고, 1명에서는 임상부분성공이 있었다. 임상실패한 경우는 없었다. 기구의 이동이나 천공의 합병증은 없었다. 2명은 전산화단층기관지 촬영으로, 4명은 기관지내시경으로 기관지늑막루를 진단하였다. 수술은 폐엽절제술(lobectomy) 2명, 폐이엽절제술(bilobectomy) 2명, 그리고 전폐절제술(pneumonectomy) 2명이었다. 수술 후 진단까지 걸린 시간은 1개월에서 34개월(평균: 10개월)이었다. 4명(59~103일: 평균 80.5일)은 사망하였고 2명(313일, 3331일)은 생존하였다. 사망 원인이 2명은 기저질환의 악화, 1명은 폐부종 및 흉수, 1명은 폐렴이었다. 한 명에서 부가적인 카테타 배액술, 2명에서 흉관 삽입을 유지하였다. 결론 폐절제 수술 후 발생할 수 있는 기관지늑막루 치료에 있어서 BOD는 유용하고 효과적인 치료 방법이다.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.