• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.329-331
• /
• 2006

연료전지용으로 많이 사용되는 전불소계 고분자인 Nafion은 좋은 기계적, 화학적 안정성 및 높은 이온전도도에도 불구하고 고가의 생산단가, 높은 메탄올 투과도, 그리고 MEA 재활용 문제 등으로 인해 상업적 응용에 제한이 있다. 본 연구는 불소그룹을 함유한 술폰화된 아릴렌이서계 블록 공중합체 고분자 전해질막의 제조 및 연료전지 특성에 관한 것이다. 이러한 고분자를 제조하기 위하여 양말단에 불소계 비닐기를 가지면서, 상온에서 술폰화 가능한 biphenyl계 단량체와 술폰화가 불가능한 sulfonyl계 단량체를 각각 합성하였으며, 이들로부터 다양한 몰조성과 분자량을 갖는 올리고머를 포함한 일련의 perfluorocyclobutane기를 포함하는 블록 공중합체를 열적 고리화 부가중합을 사용하여 합성하였다. 제조된 블록 공중합체를 상온에서 술폰화제인 chlorosulfonic acid를 이용하여 선택적으로 후술폰화시켜 강산 이온기인 sulfonic acid를 블록 올리고머에 도입하였다. 합성된 고분자들의 연료전지 특성을 Nafion-115와 비교하였다. 술폰화가 되는 올리고머 블록의 비율 증가에 따라 이온교환능력이 증가하였고, 그에 따라 높은 함수율과 이온 전도도를 나타내었으며 건조 및 습윤 상태에서도 기계적 강도가 우수하였다. 최적화된 블록공중합체를 대상으로 MEA를 제조하여 연료전지 초기성능을 측정한 결과 Nafion과 유사한 전기화학적 성능을 나타내었다.

• Polymer Science and Technology
• /
• v.13 no.6
• /
• pp.769-775
• /
• 2002

• Korean Membrane Journal
• /
• v.9 no.1
• /
• pp.43-51
• /
• 2007

This paper describes the preparation and characterization of two kinds of fluorinated polybenzimidazole (PBI)s which can be potentially used for phosphoric acid-doped, high-temperature polymer electrolyte membrane fuel cells. Two kinds of perfluorocyclobutane (PFCB)-containing monomers were prepared via following synthetic steps; after fluoroalkylation of methyl 3-(hydroxy) benzoate and methyl 4-(hydroxy) benzoate with 1,2-dibromotetrafluoroethane and subsequent Zn-mediated dehalogenation, these compounds were cyclodimerized at $200^{\circ}C$ affording the ester-terminated monomers containing PFCB ether groups. The synthesized intermediates and monomers were characterized using FT-IR, $^1H-NMR,\;^{19}F-NMR$, and mass spectroscopy. The fluorinated PBIs were then successfully prepared through the solution polycondensation of the monomers and 3,3'-diaminobenzidine in polyphosphoric acid. Compared with traditional PBI, the glass transition temperatures of the fluorinated PBIs were obtained at $262^{\circ}C\;and\;269^{\circ}C$ which are lower than that of PBI and their initial degradation temperatures were still high over $400^{\circ}C$ under nitrogen. The fluorinated PBIs showed higher d-spacing values and improved solubility in several organic solvents as well as phosphoric acid, which confirmed they could be good candidates for the high temperature fuel cell membranes.

• Membrane Journal
• /
• v.16 no.3
• /
• pp.221-229
• /
• 2006

This study is about the preparation and characterization of sulfonated random copolymer membranes containing perfluorocyclobutane (PFCB), fluorenyl, and sulfonyl units. The polymers were prepared through three synthetic steps, that is, the synthesis of a trofluorovinylether-terminated monomer, its thermal polymerization, and post-sulfonation using chlorosulfonic acid. A series of sulfonated random copolymers with different ion exchange capacity (IEC) were prepared by changing contents of fluorenyl uints in polymers with fixed molar ratio of chlorosulfonic acid during the post-sulfonation reaction. All the synthesized compounds were characterized by FT-lR, $^1H-NMR$, $^{19}F-NMR$, and Mass spectroscopy. As the content of sulfonated fluorenyl units increased, the IEC, water uptake, and ion conductivity of the sulfonated random copolymer membranes increased. The sulfonated random copolymer S-1 and S-2 showed higher values of ion conductivity than the Nafion-115 in a wide range of temperatures ($25{\sim}80^{\circ}C$).

• Membrane Journal
• /
• v.22 no.3
• /
• pp.191-200
• /
• 2012

New composite membranes were manufactured by impregnating post-sulfonated poly(arylene ether sulfone)s containing perfluorocyclobutane (PFCB) groups into porous polytetrafluoroethylene (PTFE) films. Two kinds of post-sulfonated poly(arylene ether sulfone)s with two different monomer ratios (sulfonable biphenylene monomer : non-sulfonable sulfonyl monomer = 6 : 4, 4 : 6) were first prepared through three synthetic steps: synthesis of trifluorovinylether-terminated monomers, thermal cycloaddition polymerization and post-sulfonation using chlorosulfonic acid (CSA). The composite membranes were then prepared by adjusting the concentrations (5~20 wt%) of the resulting copolymers impregnated in the PTFE films. The water uptake, ion exchange capacity (IEC) and ion conductivity of the composite membranes were characterized and compared with their unreinforced dense membranes and Nafion. All the synthesized compounds, monomers and polymers were characterized by $^1H$-NMR, $^{19}F$-NMR and FT-IR and the composite membranes were observed with scanning electron micrographs (SEM).

• Membrane Journal
• /
• v.15 no.4
• /
• pp.355-362
• /
• 2005

A PFCB-containing biphenylene ether polymer was synthesized and sulfonated using chlorosulfonic acid and then cast into membranes from their solutions for fuel cell applications. Sulfonation reactions were carried out by changing the molar ratio of chlorosulfonic acid and the PFCB-containing biphenylene ether polymer under fixed time and temperature. The resulting sulfonated polymers showed different sulfonation degree (SD), ion exchange capacity (IEC), and water uptake. With the increment of the content of chlorosulfonic acid, the SD, IEC, water uptake of the sulfonated polymer membranes increased. The ion conductivity of the sulfonated PFCB-containing biphenylene ether polymers was compared with that of Nafion 115.

• Polymer(Korea)
• /
• v.34 no.2
• /
• pp.137-143
• /
• 2010

A series of partially fluorinated, sulfonated poly(biphenylene-co-sulfone)ether containing perfluorocyclobutane(PFCB) groups were prepared for fuel cell applications through three synthetic steps: synthesis of trifluorovinylether-terminated monomers, thermal cycloaddition and post-sulfonation. Two kinds of trifluorovinylether-terminated monomers were synthesized and statistically copolymerized via thermal cycloaddition to obtain a series of polymers containing 20-60 mol% of biphenyl units(PBS-X). The post-sulfonation of PBS-X was carried out using chlorosulfonic acid(CSA) to obtain copolymers with various sulfonation levels(SPBS-X). All the synthesized compounds, monomers and polymers were characterized by $^1H$-NMR, $^{19}F$-NMR and FT-IR. It was confirmed that the ion exchange capacity(IEC), water uptake and ion conductivity of SPBS-X increased with the increment of sulfonated biphenyl units. Particularly, SPBS-60 showed higher ion conductivity compared to Nafion$^{(R)}$-115 at 25~80 $^{\circ}C$.

• Membrane Journal
• /
• v.16 no.1
• /
• pp.16-24
• /
• 2006

We report on the preparation and characterization of sulfonated polymer membranes containing perfluorocyclobutane (PFCB) units and fluorene units. The polymers were prepared through three synthetic steps, that is, the synthesis of a trifluorovinylether-terminated monomer, its thermal polymerization, and post-sulfonation using chlorosulfonic acid. A series of sulfonated polymers with different ion exchange capacity (IEC) were prepared by changing the content of chlorosulfonic acid during the post-sulfonation reaction. All the synthesized compounds were characterized by FT-IR, $^{1}H-NMR,\;^{19}F-NMR$, and Mass spectroscopy. As the content of chlorosulfonic acid increased, the SD, IEC, water uptake, and ion conductivity of the sulfonated polymer membranes increased. The sulfonated polymer 4 showed higher values of ion conductivity than the Nafion-$115^{\circledR}$ in a wide range of temperatures ($25{\sim}80^{\circ}C$).

• New & Renewable Energy
• /
• v.2 no.4 s.8
• /
• pp.46-55
• /
• 2006

본 연구는 불소그룹을 함유한 술폰화된 아릴렌에테르계 블록 공중합체 고분자 전해질막의 제조 및 연료전지 특성에 관한 것이다. 이러한 불소그룹을 함유한 술폰화된 아랄렌에테르계 블록 공중합체를 제조하기 위하여 양말단에 불소계 비닐기를 가지면서, 고분자 전환시 상온에서 술폰화 가능한 biphenyl계 단량체와 술폰화가 불가능한 sulfonyl계 단량체를 각각 합성하였다. Biphenyl계 단량체로 부터 올리고머를 합성한 후 sulfonyl계 단량체와 열적 고리화 부가중합을 하여 다양한 몰조성을 갖는 일련의 perfluorocyclobutane(PFCB)기를 포함하는 블록 공중합체를 제조하였다. 제조된 블록 공중합체를 상온에서 술폰화제인 chlorosulfonic acid(CSA)를 이용하여 후술폰화시켜 강산 이온기인 sulfonic acid를 biphenyl계 올리고머 부분에 선택적으로 도입하였다. 이렇게 제조된 술폰화된 고분자를 제막한 후 연료전지 특성을 Nafion-115와 비교하였다. 술폰화가 되는 올리고머 블록의 비율 증가에 따라 이온교환능력 (IEC)이 증가하였고 , 그에 따른 팽윤도 역시 증가하는 것을 보였다. 술폰화된 고분자들은 건조 및 습윤 상태에서도 기계적 강도가 우수하였다. 최적화된 술폰화 블록 고분자(S-2) 를 대상으로 membrane electrolyte assembly(MEA) 를 제조하여 연료전지 초기성능을 측정한 결과 Nafion-112와 유사한 전기화학적 성능을 나타내었다.