• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2000년도 학술발표회 발표논문집
• /
• pp.605-610
• /
• 2000

The effect of slow release fertilizer application on ponded and percolation water in paddies were evaluated at the experimental plots during irrigation period. We laid out three experimental plots such as standard, 100% slow-release and 80% slow-release. For ponded water, the concentrations of T-N in slow-release plots slowly increase after fertilizing and decrease slowly. The concentration of COD in percolated water was independent of the type of plots. Amount of nitrogen uptake of rice plant in a standard plot was highest at the middle or end of July and was higher than the other plots.

• 한국세라믹학회지
• /
• 제37권3호
• /
• pp.227-232
• /
• 2000

The LSM-YSZ composite electrode as a mixture of LSM and YSZ shows percolation characteristics. It was identified that the polarization resistance of LSM-YSZ composite electrode depend on YSZ connectivity by changing powder size ratio of the DLSM/DYSZ. That is, YSZ in composite electrode showed low electrochemical activity without YSZ connectivity. However, the polarization resistance decreased abruptly with YSZ connectivity due to high electrochemical activity of YSZ in composite electrode. Because the amount of three phase boundary is dependent on LSM and YSZ particle size, the polarization resistance of cathode decreases as LSM and YSZ particle size decreases.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2106-2109
• /
• 2008

Nanofluids have been studied as possible alternatives for heat transfer fluids to improve the efficiency of heat exchangers. There are deviations of measured effective thermal conductivities between research-groups, and the mechanisms of the effective thermal conductivity enhancement of nanofluids are not confirmed yet. In this study, the effects of particle shape on the effective thermal conductivity enhancement are discussed and presented as a possible explanation of the deviations. The particle motion effect is found to be negligible for nanofluids of high aspect ratio cylindrical particles, which is believed to be important for nanofluids of spherical particles, while the percolation network formation and contact resistance play dominant roles in determining the effective thermal conductivity.

• Bulletin of the Korean Chemical Society
• /
• 제30권3호
• /
• pp.671-674
• /
• 2009

In this work, high-aspect-ratio graphite nanofibers (GNFs) were used to improve the electrical, thermal, and mechanical properties of the poly(methyl methacrylate) (PMMA) polymer, as well as those of PMMA composites suitable for use in bipolar plates. In the result, an electrical percolation threshold for the composites was formed between 1 and 2 wt% GNF content. This threshold was found to be influenced strongly by the three separate stages of the meltblending process. The composites exhibited higher thermal and mechanical properties and lower thermal shrinkage compared with the neat PMMA. Thus, GNFs were demonstrated to have positive impacts on the thermo-mechanical properties of PMMA composites and showed, thereby, reasonable potential for use in composites employed in the fabrication of bipolar plates.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 춘계학술발표회 논문집
• /
• pp.192-192
• /
• 2012

플라즈마 CVD와 아크방전법을 혼합한 하이브리드 공정을 통하여 알곤과 메탄 그리고 질소를 인입하여 Cr을 타겟으로한 아크방전과 기판에 전극을 인가하는 방식의 플라즈마 CVD공정을 복합화하여 금속이 함유된 Cr-C:H 박막을 합성하고, 공정에 질소를 인입하여 박막에 질소를 도핑하여 부내식성과 전기적 전도성에 관한 고찰을 하였다. 내부식성은 동전위분극시험에서 $1{\mu}A/cm^2$을 보였고, 전기저항은 $1m{\Omega}-cm$ 이하로 측정되어 내식성과 전기전도성을 동시에 갖는 박막을 합성할 수 있었다. 내식성과 전기전도성에 대한 원인규명을 위하여 박막의 구조분석을 XPS, XRD, Raman 분석을 통하여 실시하였다. 흑연화 탄소(Graphitic carbon)와 금속콤포짓(Metal composite)은 내식성에 영향을 주었으며, 전도성물질의 percolation효과와 질소와 탄소의 단일 결합과정에서 생성되는 잉여전자에 의한 단일 결합(C-N) 분율이 전기전도성에 영향을 주었다.

• 아시안잔디학회지
• /
• 제7권1호
• /
• pp.13-18
• /
• 1993

Much attention has been given recently to solve the environmental contamination in golf courses Changing to culture practice rather than chemical practice that depends on pesticides and fertilizers is a hot issue in golf courses or grasslands. Organic soil conditioners improve soil-plant envirormental conditions rich in physical properties. In this study, measuring systems to evaluate soil conditioning effects were set up for on-site purpose. After establishing the methodology for evaluating soil conditioner effects, 2 kinds of organic conditioners were rested for examination. The systems for the methodology included a set of simulating equipment for field capacity, an impact type soil column compactor, and an infiltration-percolation system. Test results using the systems showed bulk density and infiltration rate of mixed soil were decreased at highter rates of conditioner, but total porocities were increased. Increased porocities were most capillary pore space which has a positive effect on soil water potential. The systems and methodology in this study seem to have an efficiency to measure the effects of soil conditioner on site purpose.

• Advanced Composite Materials
• /
• 제16권1호
• /
• pp.1-10
• /
• 2007

Composite materials consisting of crushed carbon fiber reinforced plastics (CFRP) pieces and acrylonitrile-butadiene-styrene (ABS) resin were prepared by an injection mold method to solve the problem of recycling of CFRP. The electrical properties, such as electrical resistivity, alternating current impedance and electromagnetic interference (EMI) shielding effect, were measured for the composites. The electrical resistivity of the composites showed a percolation type of conduction behavior and no difference between parallel and perpendicular to the injection direction was observed for CFRP content higher than the critical value. Measurement of alternating current impedance revealed that the conduction mechanism is attributed to the direct conductive paths generated by distributed carbon fibers; however, strong frequency dependence of the impedance was observed for the CFRP content near the critical one. The frequency dependence of the impedance is caused by the inter-fiber connection and can be expressed as a simple equivalent circuit. The absorption component of shielding effect (SE) was smaller than the expected value estimated from its resistivity. The decline of SE is thought to be caused by the decrease in effective thickness due to fiber orientation.

• 대한자원환경지질학회:학술대회논문집
• /
• 대한자원환경지질학회 2005년도 춘계 학술발표회 논문집
• /
• pp.148-151
• /
• 2005

Field-scale DNAPL dissolution is controlled by the topology of DNAPL distributions with respect to the velocity field. A high resolution percolation model was developed and employed to simulate the distribution of DNAPL within source zones. Statistically anisotropic permeability values and capillary parameters were generated for 10${\times}$10${\times}$10 m domains at a resolution of 0.05 to 0.1 m for various statistical properties. TCE leakage was simulated at various rates and the distribution of residual DNAPL in 'fingers' and 'lenses' was computed. Variations in finger and lens geometries, frequencies, average DNAPL saturations, and overall source topology were predicted to be strongly influenced by statistical properties of the medium as well as by injection rate and fluid properties. Model results were found to be consistent with observations from controlled DNAPL release experiments reported in the literature. The computed distributions of aquifer properties and DNAPL were utilized to perform high-resolution numerical simulations of groundwater flow and dissolved transport. Simulations were performed to assess the effect of grout or foam injection in bore holes within the source zone and of shallow point-releases of fluids with various properties on dissolution in DNAPL dissolution rate, even for widely spaced injection points. The results indicate that measures that induced partial flow reductions through DNAPL source zones can significantly decrease dissolution rates from residual DNAPL. The benefit from induced partial flow reductions is two-fold: 1) local flow reduction in DNAPL contaminated zones reduces mass transfer rates, and 2) contaminant flux reductions occur due to the decrease in groundwater velocity

• Korean Chemical Engineering Research
• /
• 제52권1호
• /
• pp.45-51
• /
• 2014

본 연구는 농업 부산물인 옥수수대(corn stover)를 이용하여 묽은 황산법(DSA; dilute sulfuric acid)과 암모니아 침지법(SAA; soaking in aqueous ammonia) 그리고 암모니아 재순환 침출법(ARP; ammonia recycle percolation)을 비교하여 각 전처리법의 특징과 장단점을 분석하였고, 동시당화공동발효를 통한 에탄올 생산을 비교하였다. ARP, DSA, SAA를 이용하여 전처리된 고형물(3% 글루칸 투입)을 15 FPU/g-glucan, 30 CBU/g-glucan의 상업용 효소(Spezyme CP와 Novozyme 188;)와 E. coli KO11 균주(ATCC$^{(R)}$ 55124)를 이용하여 동시당화공동발효를 수행하였다. 전처리 후에 남은 고형물에 있는 당의 최대이론적 에탄올 수율은 각각 87, 90 그리고 78%였다. 이것은 전처리되지 않은 원래 옥수수대의 총 당량(글루칸 +자일란) 대비 각각 69, 58, 및 74%에 해당하는 것으로 SAA의 수율이 가장 높게 관찰되었다. 또한 전처리 당화액을 이용한 동시당화공동발효 실험결과는 DSA의 당화액이 발효균주에 대하여 가장 높은 독성을 나타내었고 ARP 전처리 당화액이 그 다음으로 저해효과가 큰 것으로 나타났다. 결국 SAA를 이용하여 전처리한 후 리그닌이 풍부한 당화액은 이용하지 않고 전처리된 고형물과 동시당화공동발효 공정을 이용한 에탄올 생산이 가장 간단하면서 경제적인 공정으로 제안되었다.

• 한국수자원학회논문집
• /
• 제43권4호
• /
• pp.383-391
• /
• 2010

본 연구에서는 SWAT 모형과 HELP 모형을 이용하여 보청천 유역의 지하수 함양량을 산정하였다. SWAT 모형은 지표수 및 지하수 성분을 모두 고려할 수 있는 물순환 모형이지만, 토양층에 대한 침루과정의 물리적 해석이 미흡하다. 반면에 HELP 모형은 중간유출 및 지하수 유출성분을 모의하지 못하지만, 토양층에서의 비포화흐름을 고려하여 침루과정을 해석할 수 있다. 국내유역에서 함양량 산정을 위해 SWAT 모형은 여러 유역에서 성공적으로 적용되어 왔지만, HELP 모형의 국내유역에 대한 적용은 매우 미흡하였다. HELP 모형의 적용을 위하여 중간유출계수를 제안하였고, 수정된 지수형감쇠 가중함수를 이용하여 지하수 함양량을 산정하였다. HELP 모형의 함양량은 중간유출계수 값에 따라서 많은 차이를 나타내었다. 중간유출계수 값이 0.6인 경우에 HELP 모형과 SWAT 모형사이의 함양량 오차가 가장 작았으며 일, 월, 연단위 등 다양한 시간규모에 대하여 두 모형사이의 함양량은 비교적 잘 일치하였다. HELP 모형은 SWAT모형에 비하여 모형구조가 비교적 간단하고 입력변수가 적게 요구되므로 지하수 함양량 산정에 유용하게 적용될 수 있으며, SWAT 모형과 HELP 모형을 병행하여 적용하면 지하수 함양량 산정의 신뢰도가 향상될 것으로 판단된다.