• 한국농공학회지
• /
• 제20권3호
• /
• pp.4739-4749
• /
• 1978

This studies were conducted to derive synthetic unitgraphs and triangular unitgraphs correlated with watershed characteristics which can be used to the estimation and control of flood for the rational development of Agricultural water resources. Derived Synthetic unitgraphs and Triangular unitgraphs can be applied to the ungaged watersheds were compared with average unitgraphs by observed data. Seven small watersheds were selected as studying basins Han, Geum, Nakdong, Yeongsan and Inchon river system. The results summarized for these studies are as follows: 1. Average unitgraphs by observed data and dimensionless unitgraphs for synthesis were derived for all river systems. 2. Peak discharge per unit area of the unitgraph, qp, was derived as qp=10-0.389-0.0424Lg with a high significance. 3. Formulas for the base width of unitgraph of 50 and 75 percent for peak flow for each water systems was adopted as Table 5. 4. The base length of the unitgraph, Tb, in hours in connection with time to peak, Tp, in hours was expressed as Tb =4.3Tp. 5. Peak discharge, Qp, were obtained as Table 6 by the Triangular form to all subwatersheds. 6. Relative errors in the peak discharge of the synthetic unitgraphs showed to be 7.3 percent to the peak of observed average unitgraphs except errors of peak discharge for Yeongsan river system. This indicates that Synthetic unitgraphs for the small watersheds of Han, Geum, Nakdong and Inchon river systems can be applied to the ungaged watersheds. On the other hand, It was confirmed that the accuracy of Instantaneous Unit Hydrograph with only 1.6 percent as relative errors was approaching more closely to the observed average unitgraph than that of synthetic unitgraph with relative errors. 23.9 percent for Yeongsan river system. 7. Errors in the peak discharge of the triangular unitgraph to the observed average unitgraph showed to be 0.6 percent to 7.5 percent which can be regarded as a high precision within the range of 200 to 500$\textrm{km}^2$ in area. On the contrary, application of triangular unitgraph within the range of 200$\textrm{km}^2$ in area has defined as a unsuitable method because of high relative errors, 26.4 percent to 61.6 percent.

• 음성과학
• /
• 제8권2호
• /
• pp.83-90
• /
• 2001

We proposed a probabilistic approach of using syllable bigrams to the word-spacing problem. Syllable bigrams are extracted and the frequencies are calculated for the large corpus of 12 million words. Based on the syllable bigrams, we performed three experiments: (1) automatic word-spacing, (2) detection and correction of word-spacing errors for spelling checker, and (3) automatic insertion of a space at the end of line in the character recognition system. Experimental results show that the accuracy ratios are 97.7 percent, 82.1 percent, and 90.5%, respectively.

• 한국과학교육학회지
• /
• 제22권3호
• /
• pp.455-465
• /
• 2002

본 연구는 중학교 1학년 학생 30명을 대상으로 반복 측정, 대푯값 선정, 오차, 측정의 불확실성에 대한 신개념을 관찰 및 면담을 통하여 조사하였다. 조사 결과 50%의 학생들이 단 두 번만 측정하였고, 5번 이상 측정한 학생은 없었다. 반복 측정 후에 77%의 학생들은 자신의 느낌에 의거하여 측정값 중에서 대푯값을 선택하였고, 13%의 학생만 평균값을 계산하여 대푯값으로 정하였다. 60%의 학생은 측정 오차의 원인을 환경이나 측정 도구보다는 자신의 과실 때문이라고 하였다. 또한 대부분의 학생들은 다른 사람들에 의한 측정값이나 사간차를 둔 측정값이 달라지는 원인을 인간 때문이라고 생각하였다. 측정의 불확실성에 대하여 묻는 질문에 대하여 완전히 정확한 측정이 가능하다고 응답한 학생이 40%, 측정은 불확실하다고 응답한 학생이 33% 이었다. 학생들은 이에 대한 판단 근거로 주로 인간의 한계를 생각하였다. 결론적으로 과반수 이상의 학생들이 반복 측정 및 대푯값 선정에 대하여 이해하지 못하였고 측정 오차의 원인을 자신의 과실로 생각하였다. 또한 대부분의 학생들은 측정 결과가 다르거나, 측정이 불확실한 원인을 인간으로 생각하였다.

• 대한안전경영과학회지
• /
• 제18권2호
• /
• pp.119-125
• /
• 2016

The ratio which we usually use in producing products is nonconforming proportion or percent defective. As our modern society develops, we cannot but meet another proportion in legal, managerial, and medical areas where our human beings might commit various kinds of errors though they do not want them. In this paper we will generally call the ratio 'proportion.' When the size of such proportion as percent defective is observed by persons, it is not true proportion but apparent proportion because it has been observed with human or situational errors. Past studies have not systematically covered the analysis of relations between such proportions and type 1 and 2 error, but this paper analyses and derives such various relations, and it suggests the guideline as sixteen properties for utilization and sensitive analysis of the relations. Current paper's consideration of apparent proportion in addition to true proportion as our familiar concept will open and widen existing academic and application areas where people have mainly built societal, scientific and engineering rules and methods based only on true proportion.

• 산업경영시스템학회지
• /
• 제22권52호
• /
• pp.33-41
• /
• 1999

More than 90 percent of traffic accidents were caused by human errors in driving situation. However, the ergonomic studies were not enough to prevent these human errors. Especially, drivers acquire more than 70 percent of information using the vision, and this shows the importance of consideration about the driver's visual cognition characteristics. Consequently, the driver's cognition time and the cognition accuracy were measured for the Instrument Panel(IP) of vehicle cockpit in this study. For the experiment, subjects were divided in two groups. The first group of subjects had their own vehicles and the driver license, and the second group of the subjects didn't have own vehicle but had the driver license. IP Images were used in the experiment and the each image was made by changing layout of objects within devices. The results showed that there were no differences for the cognition time and the accuracy between images within the group, and the results between the groups showed the same trend.

• 한국항공운항학회지
• /
• 제18권2호
• /
• pp.54-59
• /
• 2010

The flight deck crew must manage complexity during daily flight operations. The Airline may obtain data regarding threats and errors through LOSA(Line Operations Safety Audits) on normal flights as predictive safety tool in Safety Management System of the Airline to actively improve the systems such as SOP(Standard Operation Procedure), training, evaluation and the TEM(Threat and Error Management) for the flight deck crew. The flight deck crew make errors when they fail managing threats. The crew mismanage around ten percent of threats and commit errors. The major mismanaged threats are aircraft malfunction, ATC(Air Traffic Communication), and wether threats. The effective countermeasures of TEM for manageing threats are leadership, workload management, monitor & cross check, Vigilance, communication environment and cooperation of the crew. It is important that organizations must monitor for the hazards of threats and improve system for the safer TEM environments.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2011년도 추계학술대회
• /
• pp.535-549
• /
• 2011

Control chart is most widely used in SPC(Statistical Process Control), Recently it is a critical issue that the standard control chart is not suitable to non-normal process with very small percent defective. Especially, this problem causes serious errors in the reliability procurement, such as semiconductor, high-precision machining and chemical process etc. Procuring process control technique for non-normal process with very small percent defective and perturbation is becoming urgent. Control chart technique in non-normal distribution become very important issue. In this paper, we investigate on research trend of control charts under non-normal distribution with very small percent defective and perturbation, and propose some variable-transformation methods applicable to CUSUM control charts in non-normal process.

• 한국정밀공학회지
• /
• 제16권2호통권95호
• /
• pp.145-152
• /
• 1999

This paper presents the principle and experimental results of a non-contact surface roughness measurement by means of screen projected pattern of lase beam reflected from a polished surface. In the reflected laser beam pattern especially from a fine surface like ground or polished one, light intensity varies from the center fo the image to its boundary as the Gaussian distribution. The standard deviation of a light intensity distribution is assumed to be a good non-contact estimator for measuring the surface roughnes, because the light reflectivity is known to be well related with the surface roughness. This method doesn't need to discriminate between the specularly reflected light and the diffusely reflected one, whereas the scattered laser intensity method must do. Nor it needs to adjust the change of light intensity caused by environmental lights or specimen materials. Reflected laser beam pattern narrowly spreads out in the vertical direction to tiny scratches on the polished surface due to abrasives. The deeper the scratch the more the dispersion, which means the rougher surface. The standard deviation of the pattern is nearly in proportion to the surface roughness. Measurement errors by this method are shown to be below 10 percent compared with those obtained by a common contact method. The inclination of measuring unit from the normal axis causes the measurement errors up to 10 percent for an angle of 4 degree. Therefore the proposed method can be used as an on-the-machine quick roughness estimator within 10 percent measurement error.

• 산업경영시스템학회지
• /
• 제41권2호
• /
• pp.117-132
• /
• 2018

There always exist nonzero inspection errors whether inspectors are humans or automatic inspection machines. Inspection errors can be categorized by two types, type I error and type II error, and they can be regarded as either a constant or a random variable. Under the assumption that two types of random inspection errors are distributed with the "uniform" distribution on a half-open interval starting from zero, it was proved that inspectors overestimate any given fraction defective with the probability more than 50%, if and only if the given fraction defective is smaller than a critical value, which depends upon only the ratio of a type II error over a type I error. In addition, it was also proved that the probability of overestimation approaches one hundred percent as a given fraction defective approaches zero. If these critical phenomena hold true for any error distribution, then it might have great economic impact on commercial inspection plans due to the unfair overestimation and the recent trend of decreasing fraction defectives in industry. In this paper, we deal with the same overestimation problem, but assume a "symmetrical triangular" distribution expecting better results since our triangular distribution is closer to a normal distribution than the uniform distribution. It turns out that the overestimation phenomenon still holds true even for the triangular error distribution.

• 성인간호학회지
• /
• 제17권5호
• /
• pp.697-708
• /
• 2005

Purpose: This study was to develop, implement, and evaluate an e-learning education program for improving practical knowledge and preventing nursing errors and adverse events of nurses working in the operating room (OR). Method: The e-learning program was developed and evaluated according to the following processes: 1) preparation phase 2) implementation phase 3) evaluation phase. In evaluation phase, the effectiveness was analyzed based on the Kirkpatrick's model. Results: The e-learning program consisted of OR basic nursing skills and techniques and nursing activities' manual based on the categories of nursing errors: surgical operation preparation, nursing skills and techniques, environment management, patient safety and comfort, and patient monitoring. The program was provided through on-line, http://cafe.daum.net/pnuhorn, for 4 weeks. The mean score(percent) of participants' satisfaction was $21.24{\pm}1.71$(68.2%). Their total knowledge level was significantly improved(Z=-3.00, p=.003) and specifically in the category of environment management(Z=-3.77, p<.001) and patient monitoring(Z=-2.46, p=.014). The occurrence of nursing errors or adverse events was a little decreased, but not statistically significant(Z=-3.10, p=.756). Conclusion: E-learning for nurses is one way of effective and efficient teaching-learning strategies. For better e-learning, it is important to develop the vital content of the education and objective measures for detecting nursing errors and adverse events.