• Journal of fish pathology
• /
• v.22 no.3
• /
• pp.263-273
• /
• 2009

There is an increasing number of reports describing Streptococcus parauberis as an important pathogen of cultured olive flounder Paralichthys olivaceus and starry flounder Platichthys stellatus in Korea. We tried to determine the effects of water temperature (14${^{\circ}C}$ and 21${^{\circ}C}$) on the pathogenicity in Streptococcal disease caused by S. parauberis. We have challenged 180 olive flounder by i.p injection to $2.0{\times}10^{7}$ live cells/fish. Mortality was monitored for 21 days post challenge. And histopathological characterizations as infection degree, tissue degeneration and/or bacterial distribution were investigated with H&E stain and in situ hybridization technique. Fifty percent and 16.7% of mortality occurred within 21 days at 21${^{\circ}C}$ and 14${^{\circ}C}$ water temperature, respectively. In most cases, the typical symptoms of olive flounder infected with S. parauberis were darkness of the skin, lethargy, mild abdominal distension cause by ascites, splenomegaly, congested liver and internal organs paleness. The pericardial sac contained large amounts of cloudy fluid. Numerous whitish nodules, which were variable in size and often confluent, were randomly scattered throughout the myocardium. Especially, pericarditis and/or myocarditis was observed in all tested fishes after death. Positive in reaction with S. parauberis were found in all tissues in situ hybridization analysis. The relative numbers of S. parauberis in heart were much more than in liver, spleen, kidney and stomach. We evaluated that S. parauberis strain causes serious damage in the pericardium, shortness of breath and the blood disorder. Therefore, pericarditis and myocarditis caused by S. parauberis were closely related to mortality of olive flounder.

• The Korean Journal of Mycology
• /
• v.40 no.1
• /
• pp.54-59
• /
• 2012

This study investigates the effect of ${\beta}$-glucans on the growth of Caenorhabditis elegans. Comparison was made among lipopolysaccharide (LPS) and ${\beta}$-glucans extracted from Phellinus baumii, in the presence of peptidoglycans which is available as the major carbon source from OP50, a non-pathogenic strain of Escherichia coli. When the three sources of carbohydrate were added singularly or in mixture to the culture media, a significant level of variation was observed with respect to fecundity. Addition of ${\beta}$-glucans appeared to increase the fecundity. When ${\beta}$-glucans was reinforced in the culture media, the fecundity increased at least 20 percent compared to the OP50-only media which exclusively contains peptidoglycans. In terms of life span, C. elegans showed a modest reduction when treated especially with ${\beta}$-glucans. C. elegans accumulated less fat in the ${\beta}$-glucans containing media different from the OP50 media. Based on the Sudan black staining, fat deposition significantly decreased corresponding to the ${\beta}$-glucans content in the media. On LPS-supplemented media, no difference was observed in fat deposition compared to the normal OP50 media. At the level of motility, ${\beta}$-glucans-treated worms moved more distance as well as LPS-treated worm. They also showed a comparable degree of motility under similar treatment with each source of carbohydrate. In conclusion, LPS and ${\beta}$-glucans, extracted from P. baumii, may not entirely replace the food required for C. elegans; however, it might be utilized as valuable alternative food source which C. elegans use as forms of carbohydrates in stead of peptidoglycan of OP50.

• Applied Biological Chemistry
• /
• v.18 no.1
• /
• pp.10-15
• /
• 1975

These studies were conducted to induce the available mutants in Takju yeasts by the irradiation of UV light. Two original strains(5-Y-5, 6-Y-6) using for irradiation of UV selected from 24 strains which were isolated from the Takju mashes And Nuruks collected from 12 local regions of Chungnam and Chungbuk provinces in Korea, and the irradiations to the yeasts with UV light were carried out at a distance 10-40cm from the sources of irradiation for 10-220 seconds. The purpose of this experiment is to report the effects of irradiating distances and times of UV light on the survival ratio of orginal yeasts, and the identification of two orginal yeasts and three mutants induced by the irradiation of UV light. The results were summarized as follows. 1) The effects of irradiating distances and times on the survival ratio on the yeasts were represented as follows. and acid productivity to the survival strains by the irradiation of UV light. The selected mutants were the strains 30-24, 40-27 which have more powerful fermentability about 10 percent than those of original strains and a strain 30-81 which have potential acid productivity. 3) The selected yeasts (5-Y-5, 6-Y-6) were identified to Saccharomyces cerevisiae by a taxonomic study of Lodder and the mutants(30-81, 40-27, 30-81) induced from above yeasts by the irradiation of UV light have almost same properties two orginal yeasts in the identical characteristics.

• Applied Biological Chemistry
• /
• v.11
• /
• pp.83-88
• /
• 1969

94 Cellulase producing strains were isoated from soils, composts, rotten woods and straws, and gastric contents and feces of herbivorous animals in various places. Among them, the strain MC-9, MC-10, MC-53 and MC-61 were found to be highly active in the degradation of carboxy methyl cellulose. Their cultural conditions adequate for the cellulase formation and effects of inorganic salts and various organic substances added to the wheat bran media were investigated. The results obtained are as follows; 1. Optimum conditions for the cellulase formation were MC-9: pH 5.5, temp. $35^{\circ}C$, incubation time 5 days, MC-10: pH 5.5-6.0, temp. $30^{\circ}C$, incubation time 5 days, MC-53: pH 3.5, temp. $30^{\circ}C$, incubation time 5 days, MC-61: pH 3.5-4.0, temp. 30-$35^{\circ}C$, incubation time 5 days. 2. Their cellulase activity in their optimum conditions were MC-9: CMC-LP(liquefying power). 87.7%, CMC-SP(saccharifying power) 3.20 glucose mg./gm. of the cultures/min., MC-10: CMC-LP 82.9%, CMC-SP 2.48 glucose mg./gm. of the cultures/min., MC-53: CMC-LP 72.4%, CMC-SP 1.76 glucose mg./gm. of the cultures/min., MC-61: CMC-LP 87.1%, CMC-SP 2.08 glucose mg./gm. of the cultures/min. 3. Additions of inorganic salts to the wheat bran media were not significant for the cellulase formation, but additions of soybean film and orange-peel pomace promoted the CMC-liquefying power 3 to 5 percent in wheat bran cultures of the strains.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.15-15
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.17-48
• /
• 1976

In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic\ulcorneriency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet\ulcornerween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr\ulcornerease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$ $$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$ The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$ These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea\ulcornerses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin\ulcornerear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num\ulcornerber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco\ulcornervery rates. The higher the rate of increase, the lower were the resulting head rice recoveries.