• Journal of Nutrition and Health
• /
• v.25 no.1
• /
• pp.12-21
• /
• 1992

This study was aimed to investigate the relations between self-selected intake of 3 macronutrie-nts and body weight gain and body fat accumulation in male rats given three isocaloric diets differing carbohydrate protein and fat contents concurrently. Also the effect of dietary restriction was observed. Forty two male rats of Sprague-Dawley strain weighing 68.7$\pm$6.1g were randomly divided into 2 groups and were allowed to have foods from 3 different cups for 8-hours a day or ad libitum, After 12 weeksthey were decapitated and their brains were quickly removed and frozen until they were assayed for serotonin and its metabolite 5-HIAA The carcass was dried at 105$\pm$2$^{\circ}C$ and measured the contents of body water and body fat. The animals chose a moderately high and constant carbohydrate level and showed the increase of percent protein intake with age and great individual variations. Protein in the diet seemed to trigger appetite and increase food intake which resulted in higher weight gains and in more fat deposition in the body. The concentration of brain serotonin did not show any correlations with the intake of nutrients. the accumulation of body fat and the gain of body weight.

• Journal of the Korean Society of Tobacco Science
• /
• v.19 no.2
• /
• pp.83-91
• /
• 1997

The vein-necrosis strain or potato virus Y (PVY-Vff) and black shank (Phytophlhora parasitica roar. nicotianae) causes severe damage on burley tobacco(Wicotiana tabacum L.) in Korea, A new burley tobacco resistance to PVY and black shank, KB 110, was developed by Korea Ginseng and Tobacco Research Institute. It was developed from the cross of Burley 21 with TC 591 in 1990, and was backrossed to Burley 21 in the following season. TC 591 has resistance to PVY and moderate resistance to race 0 of black shank, but it is susceptible to tobacco mosaic vim (TMV). KB 110 was evaluated for its resistance to PVY, TMV and black shank in the greenhouse and at fields for preliminary and performance trials. KB 110 which has secreting glandular trichomes was resistant to PVY-VN, TW and black shank. It had an erect growth habit and two more leaves per plant than that of Burley 21, and matures two to three days later. It yielded approximately 3 percent more cured leaf than the standard cultivar Burley 21, but other plant characteristics were very similar to those of Burley 21. It had acceptable standards for chemical and physical characteristics of lured leaf on regional farm test in 1995-1997. KB 110 produced average yields of good quality tobaccos and was appeared to be resistant to PVY inwhere occurrence of the virus are severe chronic at burley growing area.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.3
• /
• pp.140-148
• /
• 1992

The effect of mechanical, properties in the plastic zone near the crack-tip was investigated, under various controlled loading conditions, i.e., ${\Delta}K$ increasing, ${\Delta}K$ decreasing, and single overload test. For both ${\Delta}K$ decreasing test and ${\Delta}K$ increasing test with constant stress ratio, it is found that the ratio of material constant m'( ${\Delta}K$ decreasing test) to material constant m( ${\Delta}K$ increasing test) is larger than 1 for n<0.1, and it is equal to 1 for 0.10.2. A modified crack growth rate equation based on Forman's equation which applied stable region of fatigue crack propagation in ${\Delta}K$ decreasing test is proposed. Within the limit of this single overload test, an empirical relation between among the retardation ratio (Nd/ $N^{*}$), the strain hardening exponent (n) and the percent peak load (%PL) has been established.established.

• Toxicological Research
• /
• v.28 no.3
• /
• pp.151-157
• /
• 2012

This paper describes the effects of thermally oxidized tallow on the serum lipids profile and radical scavenging activity (RSA) of the lipids extracted from the different tissues of the rabbits. Tallow was thermally oxidized at $130^{\circ}C$ for 9, 18, 27, 36 and 45 h respectively. Thermally oxidized tallow was fed to the local strain of Himalayan rabbits for one week. Results show that oxidation increases the formation of hydroperoxides and decrease the level of radical scavenging activity of the tallow. The rabbit serum lipids profile showed a dose dependent increase in triglyceride, total cholesterol and LDL-cholesterol. However, no statistically significant increase was observed in the HDL-cholesterol with an increase of oxidation time. Serum glucose and rabbits body weight decrease significantly (p < 0.05) and was highly correlated with the serum lipids profile. The percent RSA of the lipids extracted from the liver, brain and muscles tissues showed a significant decrease with respect to 0.5, 1.0 and 1.5 g/body weight as well as oxidation time. Data suggests that thermal oxidation and use of thermally oxidized beef tallow is harmful and therefore an alternative way of cooking should be used.

• Geotechnical Engineering
• /
• v.10 no.2
• /
• pp.5-24
• /
• 1994

Resilient modulus tests were performed on five cohesive soils sampled from in -service subgrades and three cohesive soils compacted in the laboratory. It was concluded that in service resilient modulus can not be estimated from the resilient modulus of laboratory specimen compacted at same water content and dry density as in -service condition. The stress at 1 percent axial strain in unconfined compression tests ($Su_{1.0%}$) was found as a good indicator of the resilient modules ($M_R$), and the unique relationship between MR and $Su_{1.0%}$ was obtained. This relationship for the laboratory compacted soil is slightly different from that for the field compacted soil and the difference is less pronounced at the confining stress level expected to exist in subgrade. A proposed relationship itself is not affected by the changes in subgrade after construction and, therefore, it is applicable to as compacted and in service subgrade conditions.

• Structural Engineering and Mechanics
• /
• v.58 no.5
• /
• pp.931-947
• /
• 2016

The effects of nanotechnology and smartness on the buckling reduction of pipes are the main contributions of present work. For this ends, the pipe is simulated with classical piezoelectric polymeric cylindrical shell reinforced by armchair double walled boron nitride nanotubes (DWBNNTs), The structure is subjected to combined electro-thermo-mechanical loads. The surrounding elastic foundation is modeled with a novel model namely as orthotropic nonhomogeneous Pasternak medium. Using representative volume element (RVE) based on micromechanical modeling, mechanical, electrical and thermal characteristics of the equivalent composite are determined. Employing nonlinear strains-displacements and stress-strain relations as well as the charge equation for coupling of electrical and mechanical fields, the governing equations are derived based on Hamilton's principal. Based on differential quadrature method (DQM), the buckling load of pipe is calculated. The influences of electrical and thermal loads, geometrical parameters of shell, elastic foundation, orientation angle and volume percent of DWBNNTs in polymer are investigated on the buckling of pipe. Results showed that the generated ${\Phi}$ improved sensor and actuator applications in several process industries, because it increases the stability of structure. Furthermore, using nanotechnology in reinforcing the pipe, the buckling load of structure increases.

• Land and Housing Review
• /
• v.4 no.2
• /
• pp.153-165
• /
• 2013

Deficiency in access to housing is a major manifestation of poverty. In the city of Bangalore, the poor and the marginalized constitute nearly 30 percent of the 8.47 million population (2011 Census) and are living in the nearly 640 slums in addition to squatter settlements and pavements. The city sprawls over an area of 741 sq. kms (2007 estimates) and the poor have very little access to personal living space. According to the Integrated Housing and Slum Development Program guidelines, each household with four average members should have 25 sq. meters of living space. In the case of poor of Bangalore, the attainment of even this minimum is a far cry. In recognition of this acuteness with regard to the problem of housing, the government has introduced schemes like the Jawaharlal Nehru National Urban Renewal Mission and the Rajiv Awas Yojana. And these schemes have witnessed only a limited success. Whenever the problem of housing for the urban poor is considered, the state and location of slums get into focus. The people living in slums are a crucial and inevitable support to the city economy. Relocation of slum people is fraught with loss of productivity and strain on the transport system and on the incomes of the poor. Their needs like housing, schooling, health centers, creches, hospices etc. have to be provided for. Financial support to the poor with regard to their housing needs will have to be imaginatively provided by banks and related institutions.

• Advances in materials Research
• /
• v.2 no.4
• /
• pp.221-235
• /
• 2013

To obtain bronze with good mechanical properties and high wear resistance, a new bronze (CADZ) is proposed on the basis of various fundamental information. The CADZ consists of the elements Al10.5, Fe4.2, Sn3.7 and Ni3.1, and its design is based on Cu-Al10.5 alloy. The Cu-10.5%Al is very hard and brittle. To obtain the high material ductility of the Cu-10.5%Al alloy, an attempt was made to add a few percent of Sn. Moreover, to make high strength of the Cu alloy, microstructure with small grains was created by the proper amount of Fe and Ni (Fe/Ni = 0.89). The mechanical properties of the CADZ sample have been examined experimentally, and those were compared with commercial bronzes. The tensile strength and wear resistance of CADZ are higher than those for commercial bronzes. Although the ductility of CADZ is the lower level, the strain to failure of CADZ is about 2.0~5.0% higher than that for the Cu-Al10.5 alloy. Details of the microstructural effects on the mechanical properties in the CADZ sample were further discussed using various experimental results.

• Advances in aircraft and spacecraft science
• /
• v.6 no.3
• /
• pp.225-238
• /
• 2019

A spike attached to a blunt nosed body significantly alters its flow field and influences the aerodynamic coefficients at hypersonic speed. The basic body is an axisymmetric, with a hemisphere nose followed by a cylindrical portion. Five different types of spikes, namely, conical aerospike, hemisphere aerospike, flat-face aerospike, hemisphere aerodisk and flat-face aerodisk are attached to the basic body in order to assess the aerodynamic characteristic. The spiked blunt body without the aerospike or aerodisk has been set to be a basic model. The coefficients of drag, lift and pitching moment were measured with and without blunt spike body for the length-to-diameter ratio (L/D) of 0.5, 1.0, 1.5 and 2.0, at Mach 6 and angle of attack up to 8 degrees using a strain gauge balance. The measured forces and moment data are employed to determine the relative performance of the aerodynamic with respect to the basic model. A maximum of 77 percent drag reduction was achieved with hemisphere aerospike of L/D = 2.0. The comparison of aerodynamic coefficients between the basic model and the spiked blunt body reveals that the aerodynamic drag and pitching moment coefficients decrease with increasing the L/D ratio and angle of attack but the lift coefficient has increasing characteristics.

• Health Policy and Management
• /
• v.33 no.3
• /
• pp.363-369
• /
• 2023

The term "catastrophic health expenditure" means assessing the extent to which medical costs cause financial hardship for households. The aim of this research is to analyze the percentage of households that faced severe financial strain due to medical expenses from 2006 to 2021. This was achieved by utilizing data obtained from the National Survey of Tax and Benefit (NaSTaB), Korea Health Panel (KHP), and Households Income and Expenditure Survey (HIES). A trend analysis was conducted to examine the percentage of households that experienced catastrophic healthcare expenses. The households that experienced the catastrophic health expenditure was 2.49% in 2021 using the NaSTaB data. The trend analysis yielded a statistically significant result, indicating a decreasing trend (annual percent change [APC], -4.79; p<0.0001) in the proportion of households facing catastrophic health expenditures. Also, the results of the 2019 KHP and the 2021 HIES showed 1.09% and 2.44% for the households that experienced catastrophic health expenditure. The trend was increased according to the KHP (APC, 0.55; p=0.0004) and the HIES (APC, 7.04; p<0.0001). As a result, this study proposes that sustained attention and further interventions are necessary to ease the economic pressure caused by catastrophic health expenses, particularly for low-income households.