• Korean Journal of Materials Research
• /
• v.26 no.7
• /
• pp.370-375
• /
• 2016

Tensile tests and creep tests were carried out at high temperatures on an Al-$Al_4C_3$ alloy prepared by mechanical alloying technique. The material contains about 2.0% carbon and 0.9% oxygen in mass percent, and the volume fractions of $Al_4C_3$ and $Al_2O_3$ particles are estimated at 7.4 and 1.4%, respectively, from the chemical composition. Minimum creep rate decreased steeply near two critical stresses, ${\sigma}_{cl}$ (the lower critical stress) and ${\sigma}_{cu}$ (the upper critical stress), with decreasing applied stress at temperatures below 723 K. Instantaneous plastic strain was observed in creep tests above a critical stress, ${\sigma}_{ci}$, at each test temperature. ${\sigma}_{cu}$ and ${\sigma}_{ci}$ were fairly close to the 0.2% proof stress obtained by tensile tests at each test temperature. It is thought that ${\sigma}_{cl}$ and ${\sigma}_{cu}$ correspond to the microscopic yield stress and the macroscopic yield stress, respectively. The lower critical stress corresponds to the local yield stress needed for dislocations to move in the soft region within subgrains. The creep strain in the low stress range below 723 K arises mainly from the local deformation of the soft region. The upper critical stress is equivalent to the macroscopic yield stress necessary for dislocations within subgrains or in subboundaries; this stress can extensively move beyond subboundaries under a stress above the critical point to yield a macroscopic deformation. At higher temperatures above 773 K, the influence of the diffusional creep increases and the stress exponent of the creep rate decreases.

• Korean Journal of Veterinary Research
• /
• v.38 no.1
• /
• pp.53-63
• /
• 1998

Total of 1085 swine sera (1996-1997) from nation-wide were tested for the presence of antibodies to influenza A virus. Fifty nine percent of the tested sera showed seropositive by HI test. Positive sera consisted of 24--- of H3, 15--- of H1, and 20--- of the sample had both antibodies, respectively. Sera collected from various region represented 7~27--- seropositivity to H1N1, 15~25--- to H3N2, respectively. Swine influenza field isolate from nasal swab was characterized antigenically and genetically to elucidate its relatedness with other known strains of influenza A virus. The study was focused on the HA gene which is related to pathogenecity and antigenic variability of the influenza virus. By RT-PCR using influenza A/H1N1 specific primers, influenza virus H1N1 specific DNA fragment was amplified from A/Swine/Iowa/15/30(H1N1), US field isolate but not in H3N2 strain. PCR products were sequenced by dideoxy chain termination method to determine nucleotide homology with other strains of influenza A virus. The US field isolate and A/Swine/Indiana/1726/88 strain had 97--- of nucleotide homology and 98--- of amino acid homology. Based on the results obtained from this experiment, the field isolate was genetically related to A/Swine/Indiana/1726/88 and had higher homology with A/Swine/Indiana/1726/88 than with classical swine influenza virus, A/Swine/Iowa/15/30. The field isolate had no amino acid changes at the antigenic site compare to that of the A/Swine/Indiana/1726/88. The proteolytic enzyme cleavage site between HA1 and HA2 had no alteration and the amino acid arginine was intact. There is no evidence has been found that the field isolate has genetic shift or genetic drift which might altered antigenic determinant.

• Journal of the Korean Institute of Gas
• /
• v.19 no.5
• /
• pp.41-46
• /
• 2015

It is known that in aluminum 6061-T6, which is composed of $Mg_2Si$ and ${\beta}-Al_5FeSi$, void nucleation grows around ${\beta}-Al_5FeSi$ of Al606-T6. In this work, growth of voids was checked by scanning a 6061-T6 specimen with SEM observation. The effects of dislocation damping, coherency strain and voids on ultrasonic attenuation and nonlinearity parameters were experimentally measured. It was observed that a nonlinearity parameter increases until 75 percent of fatigue life and decreases after that. From the results, the authors inferred that dislocation damping and coherency damping increase nonlinearity parameters and void nucleation decreases them as ultrasonic scattering increases with void. The application of nonlinearity parameters in estimating degradation of materials with complex microstructures through fatigue process, therefore, should be carefully considered.

• Journal of the Korean Society of Safety
• /
• v.20 no.4 s.72
• /
• pp.54-62
• /
• 2005

This Study is to find out how RC beam mixed with sawdust acts comparing with normal beam without sawdust mixture, and how they can be applied to the actual structural frame, despite a Int that they are mixed with waste material : saying sawdust. ED3H1, ED3H2, ED5H1, ED5H2, ED3H1UB, ED5H1UB, ED3H2L, ED5H2L and Normal without sawdust mixture are main factor to be tested here in order to apply them to the actual case. D and H means diameter 3cm or 5cm, and holes one and two respectively. And all variables are tested with each two for one variables. Test results are compared using crack diagrams and strain & loads. There are eleven(11)% capacity decrease between ED 3H1 and ED5H1 in rebar, strain. Left and right side crack shapes are much similar in variable ED3H2L having maximum capacity 14.5 tone. ED5H2L having maximum capacity thirteen(13)tone, in case of normal 19.6 tone. Two holes in beam rather on the longitudinal direction than on the forcing direction can be more effective to keep the original capacity of the beam because this case can distribute load more uniformly. There is 33% capacity decreased in case of diameter five(5)cm, compared to diameter three(3)cm. Two holes give thirty nine(39) percent capacity decrease than one of diameter three(3)cm.

• Applied Biological Chemistry
• /
• v.26 no.2
• /
• pp.110-118
• /
• 1983

A slimy non-spore-forming bacterium strain SAF-C isolated from bean stem and root was motile with flagella and identified to one of Agrobacterium radiobacter. Studies were made on the conditions necessary for maximal production of this acidic succinoglucan polysaccharide by this strain in shaken culture. Much production was observed with yeast extract,$(NH_4)_2\;HPO_4$, distillers' dried solubles(D.D.S.), as nitrogen source in the medium composed of 4% glucose, 0.5% nitrogen source, 0.3% $CaCO_3$. The yield was greatest with yeast extract and decreased in order with the above nitrogen source from 22.9% to 9.6 percent. A polysaccharide was produced in a yield of about 25% in a medium composed of 3% glucose, 0.4% D.D.S., 0.5% $K_2\;HPO_4$, 0.01% $MgSO_4{\cdot}7H_2O$.

• Research in Plant Disease
• /
• v.18 no.1
• /
• pp.40-44
• /
• 2012

Xanthomonas arboricola pv. pruni is the causal agent of bacterial black spot disease on some stone fruits, e.g. peach, plum and apricot. To evaluate pathogenicity of Xanthomonas arboricola pv. pruni strain from plum, inoculum of the isolated strain was spray inoculated to fruits and leaves of apricot, Japanese apricot and plum. Apricot and Japanese apricot showed severe black spot symptoms on fruits and shot hole symptoms on leaves. In case of apricot, about fifty percent of fruits did not grow and dropped by hypersensitive reaction to spray infection. Plum, cv. Formosa was very susceptible, showing severe black injury lesions on fruits and cankers on leaves and new twigs. On the other hand, plum cv. Daesukjosaeng, was highly resistant. Fruits of several plum cultivars such as Formosa and Chuhee were severely infected at natural infected orchards by X. arboricola pv. pruni. Where as those of Daesukjosaeng, Taeyang, Soldam and Hongrogen were moderately infected.

• Journal of Korea Foundry Society
• /
• v.11 no.4
• /
• pp.331-337
• /
• 1991

Various test specimens were prepared by austempering low alloyed Mo-Ni-Cu ductile iron blocks of high graphite nodule count at 270, 320 or $370^{\circ}C$ for 0.5, 1, 3 or 9hrs. Tensile test, CVN impact test and plane-strain fracture toughness test(compact tension specimen of 50mm W) were done for each heat treatment condition at room temperature. X-ray diffractometer and optical microscope were used to investigate the change of microstructure and relationships between microstructure and test results. The highest retained austenite volume percent at each austempering temperature was corresponded to the highest mechanical property. The highest elongation value of 17%, U.T.S. value of 1,600 MPa or $K_{IC}$ value of 90MPa${\surd}$m were reached at each optimum condition. The best heat treatment condition for fracture toughness were 3hrs' holding time combined with the austempering temperature of 270 and $320^{\circ}C$, and 1hr's of $370^{\circ}C$.

• Structural Engineering and Mechanics
• /
• v.48 no.6
• /
• pp.833-848
• /
• 2013

Nine rectangular-section of High Strength Concrete(HSC) beams were designed and casted based on the American Concrete Institute (ACI) code provisons with varying of tensile reinforcement ratio as (${\rho}_{min}$, $0.2_{{\rho}b}$, $0.3_{{\rho}b}$, $0.4_{{\rho}b}$, $0.5_{{\rho}b}$, $0.75_{{\rho}b}$, $0.85_{{\rho}b}$, $_{{\rho}b}$, $1.2_{{\rho}b}$). Steel and concrete strains and deflections were measured at different points of the beam's length for every incremental load up to failure. The ductility ratios were calculated and the moment-curvature and load-deflection curves were drawn. The results showed that the ductility ratio reduced to less than 2 when the tensile reinforcement ratio increased to $0.5_{{\rho}b}$. Comparison of the theoretical ductility coefficient from CSA94, NZS95 and ACI with the experimental ones shows that the three mentioned codes exhibit conservative values for low reinforced HSC beams. For over-reinforced HSC beams, only the CSA94 provision is more valid. ACI bending provision is 10 percent conservative for assessing of ultimate bending moment in low-reinforced HSC section while its results are valid for over-reinforced HSC sections. The ACI code provision is non-conservative for the modulus of rupture and needs to be reviewed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.3 no.1
• /
• pp.7-11
• /
• 1974

Wistar Strain male rats were divided into four different diet groups and the control group was fed on seven percent casein diet (C), the second with a mixture of 80% of rice and 20% of buckwheat (RW), the third with rice only (R), and the fourth with a mixture of rice and buckwheat of equal nitrogen level (RWS). Each diet group consisted of six rats was fed for three weeks by the adlibitum feeding method. The results of the experiment, i, e, the growth gain and change in the level of branch-amino acids in the plasma determined by the micro-bioassay method were as follows. 1. The group C showed the largest growth gain and the rest did in the order of RW group, R group, and RWS group. 2. It was shown that rats fed on diet of higher protein score tend to have higher level of free branch-amino acids in the plasma. 3. Thus, the protein score may be estimated based on the level of the free branch-amino acids in the plasma.

• Applied Biological Chemistry
• /
• v.30 no.1
• /
• pp.40-45
• /
• 1987

Degradation of polychlorinated biphenyls(PCBs) and organochlorine pesticides by Alcaligenes aquamarinus has been studied and also degradation product of PCB-42 was investigated by TLC and GC. The less chlorinated members of PCBs such as Aroclor 1016 was degraded readily by the strain and rates of the microbial degradation of several organochlorine pesticides were found to decrease in the order of p,p'-DDT, r-BHC and Thiolix. Approximately 40 percent of PCB-42 was degraded when incubated with non-autoclaved soil for 25 days at $25^{\circ}C$. The yellow compound from PCB-42 was tentatively identified as p-chlorobenzoic acid.