• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.2
• /
• pp.80-84
• /
• 2002

In spite of simple and cheap cultivation method, water broadcast-seeded rice demonstrates uneven and unstable seedling establishment per unit land area and requires more herbicide and labor-input for weed control. Three experiments were conducted in a phytotron at 18$^{\circ}C$ to evaluate the adaptability of seed-mat mulching cultivation technologies in water seeded rice for the uniform seedling establishment and the inhibition of weed occurrence without herbicide application. Five different kinds of mat with different mesh sizes and fabric properties were tested. The emergence of rice was the highest in Lawn-mat treatment, being comparable with the control, in which seeds were sown without mat. The Lawn-mat also exhibited the lowest mat tension. Mat tension may influence the emergence of rice. And once it was soaked in water, it didn't maintain its original shape any more. The emergence rate of rice was the lowest in Safer-mat treatment. In Lawn-mat treatment, which was the most effective for rice emergence in the first study, the differences of emergence and seedling establishment of rice depending on the seeding position (upper, beneath, and between mats) treatments were negligible, while they were higher in dry seeds than in pre-germinated seeds treatment. The emergence as affected by the kinds of mat also showed the same trend when tested using barnyard grass. Depending on the kinds of mat, the inhibition effect of weeds was the greatest in Safer-mat and the poorest in Lawn-mat. These results strongly suggest the possibility that the uniform seedling establishment and weed management without chemical could be achieved simultaneously by seed-mat mulching through the combination of effective mat for the emergence of rice and another efficient mat for the inhibition of weed occurrence. This possibility was also tested in the field.

• Korean Journal of Environmental Biology
• /
• v.22 no.3
• /
• pp.381-386
• /
• 2004

To develop accurate and predictive global carbon cycle models, it is important to understand the change of accumulated carbon for many ecosystems according to successional stage. In this study, I measured total biomass, litter and soil organic matter contents through an aerial photo and field observation. As a result, accumulated organic matter contents per unit area (kg $m^{-2})$ of three communities composed at grassland were 7.00 kg $m^{-2}$, in Solidago altissima community, 9.18 kg $m^{-2}$, in Imperata cylindrica community, and 12.68 kg $m^{-2}$, in Miscanthus sinensis community, respectively. Accumulated total organic matter contents was high in Miscanthus sinensis community at later succession stage but soil carbon was low. In Miscanthus sinensis community, highly accumulated organic matter contents was resulted from increasing of biomass comparison with that of the other two communities. The pattern of accumulated organic matter contents was changed by changing of the dominant community due to progressing in succession. The accumulated carbon in temperate grassland will be increased with progressing in succession.

• Journal of Welding and Joining
• /
• v.7 no.3
• /
• pp.19-27
• /
• 1989

Both the SS41 steel and the M.E.F(martensite encapsulated islands of frrite) dual phase steel made of SS41 steel by heat treatment were welded by friction welding, and then manufactured machinemade Vnotch standard Charpy impact specimens and precracked with a fatigue system at BM(base metal), HAZ(heat affected zone) and WZ(weld interface Zone). The impact test of them was performed with an instrumented impact test machine at a number of temperatures in constant loading velocity and the dynamic fracture characteristics were studied on bases of the absorbed energy, dynamic fracture toughness and fractography from the test. The results obtained are as follows; At the room temperature, the absorbed energy is HAZ.geq.WZ.geq.BM in case of the M.E.F. dual phase steel: BM.geq.HAZ.geq.WZ in case of the SS41 steel, HAZ.geq.BM.geq.WZ at the low temperature. The absorbed energy is decreased markedly with the temperature lowering; it is highly dependent on the temperature. The dynamic fracture toughness of the M.E.F. dual phase steel is HAZ.geq.WZ.geq.BM at the room temperature; BM.geq.WZ.geq.HAZ below-60.deg. C. Therefore the reliability of friction welding is uncertain at the low temperature(below-60.deg. C). The dynamic fracture toughness of the SS41 steel; HZA.geq.WZ.geq.BM at overall temperature region. The flaw formed by rotational upsetting pressure was shown y SEM; in this region. The absorbed energy per unit area and dynamic fracture toughness were low relative to other region.

• Korean Journal of Materials Research
• /
• v.12 no.7
• /
• pp.528-532
• /
• 2002

Anodic $TiO_2$film on Ti substrate was fabricated at 180V in sulfuric acid solutions containing phosphoric acid and hydrogen peroxide. Effects of the anodizing conditions on the morphology of the oxide layers, and chemical states of the component elements of the layers were studied primarily using SEM, XRD, AFM, and XPS. The pores in the oxide layer was not uniform in size, shape, and growth direction particularly near the interface between the substrate and the oxide layer, compared with those of the surface layer. The formation of irregular type of pores seemed to be attributed to spark discharge phenomena which heavily occurred during increasing the anodic voltage. The pore diameter and the cell size increased, and the number of cells per unit area decreased with the increasing time. From the XPS results, it was shown that component elements of the electrolytes, P and S, existed in the chemical states of $PO_4^{-3}$ , $P_2$$O_{5}$, $SO_4^{-2}$ , $SO_3^{-2}$ , P, S, etc., which were penetrated from the electrolytes into the oxide layer during anodization.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.1
• /
• pp.65-73
• /
• 2002

Artificial aging was performed to simulate the microstructural degradation in 2.25Cr-1Mo steel arising from long time exposure at $540^{\circ}C$. Microstructural analysis (mean equivalent size, number of carbides per unit area) and measurement of mechanical properties(UTS, Vickers hardness) and magnetic properties(coercivity, remanence) were performed. By comparing these results, the relationship between magnetic properties and microstructural changes with artificial aging was clarified. The carbides were classified as rod, globular and acicular type in terms of morphology. The fine acicular carbides were found to diminish drastically in the initial stage of aging. The magnetic coercivity and remanence were observed to decrease rapidly in the initial about 920 hours of aging time and then decrease slowly afterwards. Linear correlations between the mechanical properties and magnetic properties such as correlations remanence were found.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.2
• /
• pp.47-52
• /
• 2011

Currently, Exterior wall's U-value about building envelope is 0.36 W/$m^2K$(Central Region), but window's one is 2.1 W/$m^2K$ according to air gap of glazing, filling gas, coating and type of windows. The door"s one is 1.6~5.5 W/$m^2{\cdot}K$ depending on material and configuration of door. As such, energy loss per unit of door is considerably larger like windows. The door for the recognition was relatively low because energy loss through the door is relatively small compared to window area. In this paper, thermal performance was analyzed through simulation targeting the door which has thermal break that can improve the insulation performance and doesn't have one. As a results of simulations, case1 was calculated as the average of 1.63 w/m2k and case 2 was calculated as the average of 4.14 w/m2k. The thermal performance of door depends on the type and condition of insulations. As a results of final simulations, Case1 was calculated as 1.06 w/m2k and Case2 was calculated as 1.27 w/m2k. As a results of the experiments, thermal performance of case 1 was measured as 1.28 w/m2k. Error between experiments and simulations is considered problems encountered when creating the samples. The effect of door frame on the overall thermal performance is slight because it's a small proportion of the door frame.

• Proceedings of the Korean Society of Sericultural Science Conference
• /
• 1997.06a
• /
• pp.1-21
• /
• 1997

Silk is praised "Queen of Fiber", which wrote a glorious page in the history of human adornment culture. Thanks to the development of science and technology, silk production has been increased dramatically during last half century. Nowadays, as "Healthy Fiber" silk lets all the globe to be forming the "Silk Boom" Like in other scientific fields, a great deal of progress has been made in sericultural science and technology, which also accelerated the development of multipurpose utilization of sercultural recourses. The main tendency of the sericulture development is raising the quality of cocoon, and at the same time, increasing the output per unit mulberry area and labor production efficiency. The chief measure of raising the cocoon quality is breeding and selecting the new mulberry and silkworm varieties, preventing and curing the diseases and pests and improving the environment of mounting, and the symble for increasing the labor productivity is carrying out the technological system of saving labor and operation ease, and enlarging the production scale. As a natural protein fiber, silk will be still a favorite with human in the next century, because its structure and properties can not be replaced by other any fiber. The 21st century is the biological time, and measures of developing sericulture will use the achievement on the field of molecular biology and biotechnology to carry out the molecular breeding, development regulating, silkworm rearing industrializing, exploiting the new silk and its new usage, utilizing the sericultural resources, and producing the special protein from silkworm as a host of expressing exogenous genes so that make the sericulture to contribute more what it can do for the human being.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.4
• /
• pp.434-444
• /
• 2021

The decrease in fatness of the Pacific oyster Crassostrea gigas, which consequently results in decrease in the profit of aquaculture industry, has become a source of serious concern in southeast coast of Korea. The ratio of flesh (edible portion) to total oyster weight, commonly called edible portion yield ("suyul" in Korean), have been used as a fatness index for the healthy and valuable state of oyster from the early stage of oyster farming in Korea. More than 360 data sets were collected from early culturing periods (in the 1970s) to the present from approximately 15 published literatures to evaluate the long-term fatness trend of oyster, reared particularly in submerged longline culturing system in Gyeongsangnam-do province. Slight decrease in oyster fatness during the 1970s to 1990s was detected in Tongyeong and Geoje Bays; however, from the 1990s to the present, clear decreasing trends were observed with a decrease of 0.04-0.08% year^-1, especially during harvest season. Oyster mass production per unit area almost doubled within a short period in the early 2000s; however, changes in coastal environment factors inhibited the fattening of shellfish from the mid 1990s. These results indicate that the severe competition in feeding and low biological production in water column might be some convincing reasons for the decrease in fatness of oyster from the 1990s, in Tongyeong and Geoje Bays, Korea.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.63 no.5
• /
• pp.95-105
• /
• 2021

Drought is a disaster that causes prolonged and wide scale damage. Recently, the severity and frequency of drought occurrences, and drought damage have been increased significantly due to climate change. As a result, a quantitative study of drought factors is needed to better understand and prevent future droughts. In the case of agricultural drought, several existing studies examine the economic damage caused by droughts and their causes, but these studies are not well suited to estimating crop-oriented agricultural drought damage and the factors that absolutely affect agricultural drought. This study determines which factors most affect agricultural drought. It examines meteorological factors and those related to agricultural water supplied by irrigation facilities. Rice paddy production per unit area is lower than the average from the last two years where agricultural drought occurred. We compare the relative frequency of agricultural drought impacts with irrigation facilities, effective reservoir storage, the number of water supply facilities, and the meteorological drought index such as Standardized Precipitation Index (SPI). To identify factors that affect agricultural drought, we correlate rice paddy production anomalies with irrigation water supply for the past two years. There was a high positive correlation between rice paddy production and irrigation water usage, and there was a low or moderate negative correlation between rice paddy production anomalies compared to the average of the past two years and SPI. As a result, agricultural water supply by irrigation facilities was judged to be more influential than meteorological factors in rice paddy production. This study is expected to help local governments establish policies related to agricultural drought response.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.3
• /
• pp.69-78
• /
• 2021

Estimated construction cost is an important index to secure an optimal budget which needs to go into construction projects in the previous of basic design phase. In order for public institutions to calculate the estimated construction cost, the cost per unit area of public buildings is used. However, the current calculation method of the estimated construction cost in public buildings is impossible to reflect the characteristics of many facilities and combinations. The purpose of this study is to develop an estimation model in the previous of basic design phase for the elementary, middle and high school facilities. it is expected that it is possible to estimate the construction cost of the elementary, middle and high schools in a reasonable and reliable manner through the estimation model developed in this study.