• International Area Studies Review
• /
• v.12 no.3
• /
• pp.135-149
• /
• 2008

This paper studies the determinants of the pattern of penetration of US films. The global dominance of US films has been an important issue. There has been several factors that make US films competitive global film market. Market size, large investment and political hegemony have been regarded as important determinants. But the number of varieties has not been considered, although the variety is important in the pattern of differentiated products such as films. This study is purposed to analyze the export pattern of US films and to find factors that affects the pattern of trade in films. The export pattern of US films to the seven leading countries in production of films is analyzed. The US tends to export more to the country with smaller number of films produced domestically. This paper concludes that number of films is the important determinant of the pattern of trades in US films.

• Geomechanics and Engineering
• /
• v.12 no.5
• /
• pp.771-783
• /
• 2017

Using a transparent fracture replica with aperture size and water-cement ratio (w/c), the factors affecting the penetration behavior of rock grouting were investigated through laboratory experiments. In addition, the waterproof efficiency was estimated by the reduction of water outflow through the fractures after the grout curing process. Penetration behavior shows that grout penetration patterns present similarly radial forms in all experimental cases; however, velocity of grout penetration showed clear differences according to the aperture sizes and water-cement ratio. It can be seen that the waterproof efficiency increased as the aperture size and w/c decreased. During grout injection or curing processes, air bubbles formed and bleeding occurred, both of which affected the waterproof ability of the grouting. These two phenomena can significantly prevent the successful performance of rock grouting in field-scale underground spaces, especially at deep depth conditions. Our research can provide a foundation for improving and optimizing the innovative techniques of rock grouting.

• Journal of Welding and Joining
• /
• v.27 no.2
• /
• pp.44-50
• /
• 2009

The characteristics of arc pressure, current density and heat flux distribution are important factors in understanding physical arc phenomena, which will have a marked effect on the penetration, size and shape of a weld in TIG welding. The purpose of this study is to find out the effect of the heat flux on the melting efficiency and penetration shape in TIG welding using the results of the previous investigators. The conclusions obtained permit to draw a proper method which derived the heat flux distributions by arc pressure distribution measurements, but previous researchers calculated heat flux and current distribution with the heat intensity measurements by the calorimetry. Heat flux of Ar gas arc was concentrated at the central part and distributed low from the arc axis to the radial direction, that of He mixing arc was lower than that of Ar gas, and it was wide distributed to radial direction. That showed a similar characteristic with the Nestor's by calorimetry calculated values. Throughout heat flux drawn in this study was discussed melting efficiency and penetration shape on Ar gas and He mixing gas arc.

• Korean journal of applied entomology
• /
• v.44 no.3 s.140
• /
• pp.177-187
• /
• 2005

For the comparison of feeding behavior of Nilaparvata lugens among different rice varieties, electrical penetration graph (EPG) technique was used. Ten rice varieties were selected from national-widely recommended rice varieties cultivating in Chungnam province. The correlation between feeding duration and honeydew amount excreted was investigated, and the types of EPG pattern were analyzed among rice varieties. The EPG patterns divided into 6 types according to electrical specific feature, respectively. Type 1 pattern was a searching feeding sites, resting or wandering on a rice plant. Type 2 pattern was appeared when the insect untaken from phloem sieve element. Type 3 pattern was observed when the insect piercing into the rice plant. Type 4 pattern was observed when the insect salivating in rice plant. Type 5 pattern was observed when the insect ingesting from the xylem. Type 6 pattern was observed when the stylet moving in cell. Feeding duration time on Gum-nam was significantly shorter than Dong-jin, Dae-ahn, Dong-ahn, Dae-san. Also, on Gun-nam, it was shown that the brown planthopper did not penetrate the cuticle for a long time. The total number of excreted honeydew droplets by the brown planthopper was the greatest in Dong-jin variety and the least in Gum-nam variety. In proportion to phloem feeding time, the number of honeydew droplets had been increased. According to the results of EPG patterns and honeydew droplets analysis, N. lugens seems to prefer Dong-jin, Dong-ahn, Dae-san, and Dae-ahn to Gum-nam, Da-san, and Nam-chun rice plant variety.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.6
• /
• pp.239-245
• /
• 2001

$Al/Al_2O_3$composites were prepared from the reaction of mullite preforms and amorphous silica in aluminum melt at $1100^{\circ}C$ for 5 hrs. The chemical reaction between mullite preform and aluminum melt has formed the interconnected microstructure. The metal content of $Al/Al_2O_3$composite was controlled with the variable of the apparent porosity according to the sintering temperature of mullite preforms; $1600^{\circ}C$,$ 1625^{\circ}C$, $1650^{\circ}C$ and $1700^{\circ}C$, the mechanical properties of $Al/Al_2O_3$composite were investigated upon the content of Al. The mullite preform sintered above $1600^{\circ}C$ showed the chemical reaction with the penetrated Al melt, but the mullite sintered at $1600^{\circ}C$ didnt react with aluminum melt owing to the non-wetting of Al melt/mullite preform. The influences of penetration direction on the mechanical properties of composites were considered with the two different models of the perpendicular pattern and the parallel pattern to the direction of Al melt penetration. With the increase of Al metal penetration content, the fracture strength of $Al/Al_2O_3$composite decreased and the fracture toughness of composite increased. The microstructure of $Al/Al_2O_3$composite was determined by the direction of metal penetration, but the fracture strength and fracture toughness of composite didnt show the dependence on metal penetration direction.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.7 no.3
• /
• pp.83-94
• /
• 2005

This paper is to analyze patterns for Indonesian traditional textiles. Ikat is the resist-dyeing process in which designs are reserved in warp or weft yams by tying off small bundles of threads with fiber resists to prevent the penetration of dye. Batik is the technique applying a wax resist before dyeing to form a pattern in negative. Ikat and batik are the most renowned textile arts of Indonesia. Patterns are classified as geometric pattern, plant pattern, animal pattern. Also this paper discusses the origins of ikat and batik. Therefore this Paper proposes the classification and feature extraction of ikat and batik patterns. The results of this study can be effectively applied to develop competitive pattern design for Indonesian textile market.

• International Journal of Contents
• /
• v.5 no.2
• /
• pp.16-19
• /
• 2009

In this paper, we concern about the distribution characteristics of surface temperature by the increment of time, diffusivity and heat flux on irradiating of a laser. The penetration depth corresponding to the induced constant heat flux or irradiated laser, is simulated by a computer algorithm. The distribution of temperature versus penetration depth for the variation of time and diffusivity is characterized at the constant heat flux and on irradiating of a laser. The temperature of constant heat flux at the fixed diffusivity or time, is decreased by the pattern of exponential function as the time t or diffusivity a is increased (a=10, 100, 1000). The temperature of constant heat flux is not changed but exponentially fixed with the increasing diffusivity and the fixed time. On the other hand, the temperature of laser at the fixed diffusivity or time is decreased linearly. Our results show that the characteristics of the simulated surface temperature in a semi-infinite solid are similar to the graphs on theoretical consideration.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.28 no.2
• /
• pp.45-56
• /
• 2010

The computer simulation is presented of gravure ink transferring behavior and penetration to the paper when an gravure roller is used to transfer a printing ink onto a substrate. The three dimensional unsteady ink motion is simulated by Polyflow package software and experimented by IGT gravure printing test machine. The simulation is performed where the flow domain is bounded above by a stress free surface and bounded below by a moving substrate. Specific predictions are made for particular pattern of cells and substrates. Cell size and ink rheological properties are found to be the principal determination of transferring behavior. Simulation is currently restricted to the flow domain beneath the receding meniscus. Both Newtonian and shear thinning inks are considered.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.1
• /
• pp.68-75
• /
• 2000

In this paper, we analyzed the radiation patterns of a monopole antenna mounted on cylinder and EM penetration problems in the complex structures by using FDTD method associated with 3-D PML absorbing boundary condition. In order to validate the proposed FDTD code, the radiation patterns of monopole antenna mounted on cylinders were compared with the exact Carter's solutions. As a results, the predicted radiation pattern exhibited excellent agreement with exact solution. And the FDTD code is applied to analyze the EM penetration problems in complex structures, Blackhawk helicopter. As the plane wave is excited, a significant amount of energy penetrates the helicopter structure, and it is dependent on aperture/airframe interface.

• Journal of Welding and Joining
• /
• v.28 no.5
• /
• pp.93-98
• /
• 2010

The properties of GTA weld for ferritic stainless steel have been studied with different $O_2$ contents in Ar shielding gas at the constant welding speed. A small amount of $O_2$ (0.01~1.0%) was mixed in Ar shielding gas in order to improve the weld penetration. The fully penetrated GTA weld was acquired at 160A weld current shielded by pure Ar gas. Addition of oxygen larger than 0.1% made a full penetration at lower weld current than 160A. The small addition of $O_2$ in Ar shielding gas improved the penetration properties of GTA weld because the $O_2$ in the molten pool accelerated the flow of molten pool and changed the flow pattern from outward to inward direction. The impact energy and DBTT (Ductile- Brittle- Transition-Temperature) of the GTA weld shielded by Ar+$O_2$ (less 0.3%) was similar and the corrosion properties of GTA weld was slightly inferior to those of GTA weld shielded by pure Ar gas.