• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.8
• /
• pp.387-391
• /
• 2006

The Ag photodoping effect in amorphous $As_{40}Ge_{10}Se_{15}S_{35}$ chalcogenide thin films for holographic recording has been investigated using a He-Ne laser (${\lambda}$=632.8 nm). The chalcogenide films thickness prepared in the present work were thinner in comparison with the penetration depth of recording light ($d_p=1.66{\mu}m$). It exhibits a tendency of the variation of the diffraction efficiency (${\eta}$) in amorphous chalcogende films, independently of the Ag photodoping. That is, ${\eta}$ increases rapidly at the beginning of the recording process and reaches the maximum (${\eta}_{max}$) and slowly decreases slowly with the exposed time. In addition, the value of ${\eta}_{max}$ depends strongly on chalcogenide film thickness(d) and its maximum peak among the films with d = 40, 80, 150, 300, and 633 nm is observed 0.083% at d = 150 nm (approximately 1/2 ${\Delta}n$), where ${\Delta}$n is the refractive index of chalcogenide thin film (${\Delta}n=2.0$). The ${\eta}$ is largely enhanced by Ag photodoping into the chakogenides. In particular, the value of ${\eta}_{max}$ in a bilayer of 10-nm-thick Ag/150-nm-thick $As_{40}Ge_{10}Se_{15}S_{35}$ film is about 1.6%, which corresponds to ${\sim}20$ times larger than that of the single-layer $As_{40}Ge_{10}Se_{15}S_{35}$ thin film (without Ag). And we obtained the diffraction pattern according to the formation of (P:P) polarization holographic grating using Mask pattern and SLM.

• Journal of radiological science and technology
• /
• v.26 no.1
• /
• pp.51-62
• /
• 2003

We carried out studies on develop of the ultrasound tissue mimicking materials(TMM) by synthesis of polymer urethane(C, CCR, $TiO_2$, tungsten, graphite, silver type). The major finding were as follows; (1) C type TMM was shown good homogeneity, penetration, gray scale like as liver tissue and propagated speed 1,540 m/s, attenuation $0.5{\sim}0.7\;dB/cm/MHz$. (2) $TiO_2$ type TMM was shown heterogeneous dot echo pattern. (3) Silver type TMM was appear good homogeneous echo pattern like as echo texture of thyroid gland. Therefor, C type TMM will be useful for ultrasound Q/A phantom materials and previous phantom materials.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1507-1510
• /
• 2005

This study was carried out as a part of the research on the development of a maskless and electroless process for fabricating metal micro/nanostructures by using a nanoindenter and an electroless deposition technique. $2-\mu{m}-deep$ indentation tests on Ni and Cu samples were performed. The elastic recovery of the Ni and Cu was 9.30% and 9.53% of the maximum penetration depth, respectively. The hardness and the elastic modulus were 1.56 GPa and 120 GPa for Ni and 1.49 GPa and 100 GPa for Cu. The effect of single-point diamond machining conditions such as the Berkovich tip orientation (0, 45, and $90^{\circ}$) and the normal load (0.1, 0.3, 0.5, 1, 3, and 5 mN), on both the deformation behavior and the morphology of cutting traces (such as width and depth) was investigated by constant-load scratch tests. The tip orientation had a significant influence on the coefficient of friction, which varied from 0.52-0.66 for Ni and from 0.46-0.61 for Cu. The crisscross-pattern sample showed that the tip orientation strongly affects the surface quality of the machined area during scratching. A selective deposition of Cu at the pit-like defect on a p-type Si(111) surface was also investigated. Preferential deposition of the Cu occurred at the surface defect sites of silicon wafers, indicating that those defect sites act as active sites for the deposition reaction. The shape of the Cu-deposited area was almost the same as that of the residual stress field.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.4
• /
• pp.767-780
• /
• 2015

In recent years, as smart phone penetration rate is growing explosively, new forms of cyber crime data is poured out beyond the limits of management system for cyber crime investigation. These new forms of data are collected and stored in police station but, some of data are not systematically managed. As a result, investigators sometimes miss the hidden data which can be critical for a case. Crime data is usually generated by computer which produces complex and huge data and records many logs automatically, so it is necessary to simplify a collected data and cluster by crime pattern. In this paper, we categorize all kinds of cyber crime and simplify crime database and extract critical clues relative to other cases. Through data mining and network-visualization, we found there is correlation between clues of a case. From this result, we conclude cyber crime data mining helps crime prevention, early blocking and increasing the efficiency of the investigation.

• Journal of Korea Technology Innovation Society
• /
• v.20 no.4
• /
• pp.1243-1261
• /
• 2017

Mobile telecom markets have dramatically increased in the last decade due to a remarkable subscriber base growth. The diffusion patterns of the services are a major concern for mobile carriers preparing those new services. We assume that the diffusion patterns of those services will be similar to those of previous mobile services, and discovering the diffusion patterns of those services is an essential task of mobile carriers for preparing the next mobile services. This study attempts to classify some groups which show similar diffusion patterns of mobile services. Using a traditional diffusion model, this study estimates diffusion patterns of twenty five western European countries. The estimation is based on the monthly penetration ratio of those countries from 1993 to 2004. Based on the estimation, the cluster analysis discovers that there are two different countries groups in terms of mobile diffusion pattern: high imitation countries and low imitation countries. The critical point for classifying the two groups in terms of imitation effect was 0.90. The results provide the basis for developing a causal relationship model which explains the different diffusion pattern of mobile services and planning new networks for the advanced mobile services.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.8 s.185
• /
• pp.171-177
• /
• 2006

This study was performed as a part of the research on the development of a maskless and electroless process for fabricating metal micro/nanostructures by using a nanoindenter and an electroless deposition technique. $2-{\mu}m$-deep indentation tests on Ni and Cu samples were performed. The elastic recovery of the Ni and Cu was 9.30% and 9.53% of the maximum penetration depth, respectively. The hardness and the elastic modulus were 1.56 GPa and 120 GPa for Ni and 1.51 GPa and 104 GPa for Cu. The effect of single-point diamond machining conditions such as the Berkovich tip orientation (0, 45, and $90^{\circ}$ ) and the normal load (0.1, 0.3, 0.5, 1, 3, and 5 mN), on both the deformation behavior and the morphology of cutting traces (such as width and depth) was investigated by constant-load scratch tests. The tip orientation had a significant influence on the coefficient of friction, which varied from 0.52-0.66 for Ni and from 0.46- 0.61 for Cu. The crisscross-pattern sample showed that the tip orientation strongly affects the surface quality of the machined are a during scratching. A selective deposition of Cu at the pit-like defect on a p-type Si(111) surface was also investigated. Preferential deposition of the Cu occurred at the surface defect sites of silicon wafers, indicating that those defect sites act as active sites for the deposition reaction. The shape of the Cu-deposited area was almost the same as that of the residual stress field.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.468-476
• /
• 1998

The purpose of this study was to observe the morphologic change of dentinal surface, adhesion in interface between dentin and bonding agents, and penetration pattern of resin tags into dentinal tubles according to bonding procedure of ONE-STEP universal adhesive system. Ten extracted human molars were mounted in dental stone and sectioned to expose mid-coronal occlusal dentin and again sectioned tooth crown apically. Specimens were randomly assigned to three groups for dentin conditioning with 32% phoshoric acid, two coats of bonding agents after dentin conditioning, and bond of composite resin. The surfaces of dentin were treated with etch ant and applied bonding agent, and bonded composite resin according to the directions of manufacturer. Specimens which were boned composite were sectioned longitudinally for observing interfaces between resin and dentin. Two of specimens which were sectioned longitudinally were immersed in 6 N HCL for 30 seconds and 1% NaOCL for 12 hours to partially demineralize and deproteinize the dentin substrate. Each specimen was mounted on a brass stub, sputter-coated with gold and observed under SEM. The result were as follows : 1. On the dentinal surface which was conditioned with 32% phosphoric acid. the smear layer was completely removed. orifices of dentinal tubules were opened 3-$5{\mu}m$ wide. and dentinal surface was irregular. 2. On the dentinal surface which was applied ONE-STEP. bonding agent. resin particles were observed on the orifices of dentinal tubules and intertubular dentin. 3. There were close adaptation between dentin and resin and were the pattern which composite invaded into dentin. 4. 1-$3{\mu}m$-wide hybrid layer was visible in the interface between dentin and resin. 5. Long and funnel shaped resin tags were observed in demineralized specimens. and the surfaces of tags were rough.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.4
• /
• pp.869-882
• /
• 2012

With the growth of Web services and the development of web exploit toolkits, web-based malware has increased dramatically. Using Javascript Obfuscation, recent web-based malware hide a malicious URL and the exploit code. Thus, pattern matching for network intrusion detection systems has difficulty of detecting malware. Though various methods have proposed to detect Javascript malware on a users' web browser, the overall detection is needed to counter advanced attacks such as APTs(Advanced Persistent Treats), aimed at penetration into a certain an organization's intranet. To overcome the limitation of previous pattern matching for network intrusion detection systems, a novel deobfuscating method to handle obfuscated Javascript is needed. In this paper, we propose a framework for effective hidden malware detection through an automated deobfuscation regardless of advanced obfuscation techniques with overriding JavaScript functions and a separate JavaScript interpreter through to improve jsunpack-n.

• Journal of Animal Science and Technology
• /
• v.54 no.4
• /
• pp.283-290
• /
• 2012

Cryopreservation induces sublethal damage to the spermatozoa, which leads to their reduced fertile life. The objective of this study was to investigate the effect of taurine, hypotaurine and trehalose as antioxidants on the function of the freezing-thawed sperm in Korean Jeju Black Bull. The semen was cryopreserved with tris egg yolk extendercontaining 7% glycerol and treated with 20mM taurine, hypotaurine and trehalose. Frozen-thawed sperms were evaluated for sperm motility, viability, membrane integrity, acrosome integrity and sperm penetration ability. The results were compared to semen cryopreserved in tris egg yolk extender containing 7% glycerol only as control. Frozen-thawed semen evaluation clearlyindicated that the addition of taurine or hypotaurine significantly improved (p<0.05) the motility and viability compared to control spermatozoa. Moreover, in membrane integrity, swollen sperm ratio was significantly increased (p<0.05) in taurine, hypotaurine or trehalose compared to control. In sperm acrosome integrity, F pattern ratio was increased (p<0.05) in hypotaurine among treatments, and AR pattern was significantly lowered (p<0.05) in taurine, hypotaurine and trehalose. In assessed sperm fertilizing ability, taurine, hypotaurine or trehalose significantly improved (p<0.05) the ratio of pronucleus formation and SFI. Finally, compared with the control, addition of taurine, hypotaurine or trehalose as an antioxidant to the freezing extender showed more positive effects on the frozen-thawed spermatozoa. It is concluded that the addition of taurine, hypotaurine, or trehalose to the freezing extender could reduce cryodamage of the Korean Jeju Black Bull spermatozoa.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.1
• /
• pp.79-85
• /
• 2007

Demand forecasting methods for a consumer product such as TV or refrigerator are widely known. However, sales forecast for a brand new product cannot be estimated using conventional forecasting methods. This study proposes a five-step procedure in forecasting a newly developed product. Step one defines functions in a High Touch product in order to estimate relative attraction of the product to consumer group. In step two, for a comparison purpose, a compatible product that is successfully penetrated into market is selected. Step three breaks a target population into many segments based on demography. Step four calculates relative attraction between the High Touch product and the compatible product. Finally, market penetration rate of the High Touch product is estimated using a bell-shaped diffusion curve of the compatible product. The process offers a method to estimate potential demand and growth pattern of the new High Touch product.